- Admissions Help Desk
DEPARTMENT OF MECHANICAL ENGINEERING
Mechanical
Publications
International Journal Publications (2023)
International Journal Publications (2022)
|
International Journal Publications (2021)
S.No | Faculty Names | Title of the Manuscript | Name of the Journal | Volume No. | Issue No | Page No |
---|---|---|---|---|---|---|
1 | Mahashar Ali J and Siddhi Jailani H | Characterization of surface roughness of ground specimens using image processing | Advances in Design and Thermal Systems | 133-141 | ||
2 | S Ramalingam, S Rasool Mohideen, | Hybrid polymer composite material for robotic manipulator subject to single link flexibility | International Journal of Ambient Energy | 42 | 2 | 514-521 |
3 | S Ramalingam, S Rasool Mohideen | Composite materials for advanced flexible link robotic manipulators: an investigation | International Journal of Ambient Energy | 42 | 14 | 1670-75 |
4 | TR Tamilarasan, S. Rasool Mohideen, MS. Dennison | Impact Strength Characterization of Closed-cell Aluminium foam (AL003860) subjected to Cryogenic treatments | Design Engineering | |||
5 | TR. Tamilarasan, S.R. Mohideen, | The Effect of Novel Cryogenic Treatment in the Microstructure Analysis of Al 6101 Closed-Cell Foam | Advances in Design and Thermal Systems. | 19-37 | ||
6 | Syed Shaul Hameed, V Muralidharan, Bernadetta Kwintiana Ane | Comparative analysis of fuzzy classifier and ANN with histogram features for defect detection and classification in planetary gearbox | Applied Soft Computing | 106 | 107306 | |
7 | Syed Shaul Hameed, V Muralidharan, D Pradeepkumar, S Ravikumar | Fault Classification using Fuzzy Logic in an Epicyclic Gearbox with Statistical Features | SAE Technical Paper | |||
8 | SR Mohideen | Toughness Property Evaluation of Additive Welded Low Carbon Steel Weldments | Advances in Design and Thermal Systems. | 434-439 | ||
9 | Sivakumar C, Muralidharan V, Ravikumar Natarajan, D Murali Manohar, | Numerical Analysis on Mechanical Behavior of Viscoelastic Nano Composite | SAE Technical Paper | |||
10 | Ravikumar Natarajan, Rizwan Asif S, Sivakumar C, D Murali Manohar | Experimental Modal Analysis Study on Graphene Filled SBR | SAE Technical Paper | |||
11 | Sathickbasha K., Selvakumar A.S., Surya Rajan Balachandran, | Multi-metal sulfide pre-blend combination on the tribological performance of the brake friction material | Industrial Lubrication and Tribology | 73 | 2 | |
12 | Surya Rajan Balachandran,Sathickbasha Kathar Basha | Evaluation of mechanical properties of novel GLARE laminates filled with nanoclay | Polymer Composites | 42 | 8 | 4015-4028 |
13 | B Surya Rajan, K Sathick Basha, | A comprehensive review on cellulose nanocrystals and cellulose nanofibers: Pretreatment, preparation, and characterization | Polymer Composites | 42 | 4 | 1588-1630 |
14 | K. Bak Mohamed, L. | Structural and Thermal Analysis of Composite Wind Turbine Blade for Wind Mill Applications | Advances in Design and Thermal Systems | pp 1-17 | ||
15 | R.Karunanithi, A.S.Selvakumar | The Impact of Squeeze Casting in AMMC- Review | Advances in Design and Thermal System , Lecture Notes in Mechanical Engineering, Springer | 253-259 | ||
16 | A.S.Selvakumar | Effect of Barium Sulfate on Mechanical, DMA, Wear Analysis of Woven Hybrid with Wire Mesh Composite | Advances in Design and Thermal System , Lecture Notes in Mechanical Engineering, Springer | 529-539 | ||
17 | A. Varun Kumar , A.S.Selvakumar , | Correlation between material properties and free vibration characteristics of TIG and laser welded Stainless steel 304 reinforced with Al2O3 Microparticles | Engineering Science and Technology | 24 | 5 | 1253-1261 |
18 | Varun Kumar A | Joining of Ceramic to Metal by Friction Welding Process: A Review | Journal of Materials: Design and Applications | 235 | 7 | 1723-1736 |
19 | Ravikumar N, Tamilarasan TR, | Effect of graphene on friction and wear behavior of friction composite tested against grey cast iron disc alloyed with copper | Carbon Trends | 3 | 100031 | |
20 | Jamesha Ibrahim K, Thirumurugan M, Jeyakumar P D, Arockia Julias A, | Drilling performances of kenaf fibre/steel mesh reinforced hybrid epoxy composites | Advances in Design & Thermal Systems, Lecture Notes in Mechanical Engineering. Springer, | 291-300 | ||
21 | Jeyakumar P D, Dineshkumar C, Arockia Julias A, Thirumurugan M | Development of onboard engine management system – Prediction of oil degradation | Advances in Design & Thermal Systems, Lecture Notes in Mechanical Engineering. Springer | 349-359 | ||
22 | Arockia Julias A, Jeyakumar Ponniah Daniel, D Murali Manohar, Thirumurugan Muthiah, | Flexural Behavior of Hybrid Layered Composites Suitable for Automotive Structural Applications | SAE Technical Paper | |||
23 | Arockia Julias A, Abdul Kareem, Ganesh Raman A, Jeyakumar Ponniah Daniel, and Prabu Krishnasamy | Mechanical Studies on Polycaprolactone Based Green Composite | SAE Technical Paper | |||
24 | A. Arockia Julias & | Experimental Study on the Drilling Parameter Analysis of Banana Fiber Reinforced Vajram Mixed Phenolic Resin Composite Laminates | Journal of Natural Fibers | |||
25 | G. Rajesh | A FUZZY INFERENCE APPROACH TO SUPPLIER SEGMENTATION FOR STRATEGIC DEVELOPMENT | South African Journal of Industrial Engineering | 32 | 1 | 44-55 |
26 | A. Muthu Manokar | Investigation of performance enhancement ofsolar still incorporated with Gallus gallus domesticus cascara as sensible heat storage material | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 611–624 | |
27 | A. Muthu Manokar, | Battery thermal management: An optimization study of parallelized conjugate numerical analysis using Cuckoo search and Artificial bee colony algorithm | International Journal of Heat and Mass Transfer, ISSN: 0017-9310, Elsevier | 166 | Article ID: 120798 | |
28 | A. Muthu Manokar, | Experimental investigation on cooling the photo voltaic panel using hybrid nanofluids | Applied Nanoscience, ISSN:2190-5517, Springer | 11 | 363–374 | |
29 | A. Muthu Manokar, | Performance assessment of free standing and building integrated grid connected photovoltaic system for southern part of India | Building Services Engineering Research and Technology,ISSN:1477-0849, SAGE Publishing | 42 | 2 | 237-248 |
30 | A. Muthu Manokar, | Effect of design parameters on fresh water produced from triangular basin and conventional basin solar still | International Journal of Photoenergy, 1687-529X, Hindawi, | 2021 | Article ID: 6619138 | |
31 | A. Muthu Manokar, | Energy, Exergy Analysis, and Optimizations of Collector Cover Thickness of a Solar Still in El Oued Climate, Algeria | International Journal of Photoenergy, 1687-529X, Hindawi, | 2021 | Article ID 6668325 | |
32 | A. Muthu Manokar, | Enhancing the fresh water produced from inclined cover stepped absorber solar still using wick and energy storage materials | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 18146–18162 | |
33 | A. Muthu Manokar, | Phosphate bags as energy storage materials for enhancement of solar still performance | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 21540–2155207 | |
34 | A. Muthu Manokar, | Hybrid cooling of cylindrical battery with liquid channels in phase change material | International Journal of Energy Research, ISSN:1099-114X, John Wiley & Sons | 45 | 7 | 11065-11083 |
35 | A. Muthu Manokar, | Performance analysis ofa modified solar still using reduced graphene oxide coated absorber plate with activated carbon pellet | Sustainable Energy Technologies and Assessments ISSN: 2213-1388, Elsevier | 45 | Article number: 101046 | |
36 | A. Muthu Manokar, | Comparative study of a conventional solar still with different basin materials using exergy analysis | Desalination and water treatment, ISSN:1944-3986, Desalination Publications | 224 | 55-64 | |
37 | A. Muthu Manokar, | Experimental investigation on the thermal performance of inserted helical tube three-fluid heat exchanger using graphene/water nanofluid | Journal of Thermal Analysis and Calorimetry, ISSN:1588-2926, Springer | 28 | 22296–22309 | |
38 | A. Muthu Manokar, | Review on progress in concrete solar water collectors | 28 | 22296–22309 | ||
39 | A. Muthu Manokar, | Performance enhancements of conventional solar still using reflective aluminium foil sheet and reflective glass mirrors: energy and exergy analysis | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 32508–32516 | |
40 | A. Muthu Manokar, | Investigation on the performance enhancement of single-slope solar still using green fibre insulation derived from Artocarpus heterophyllus rags reinforced with Azadirachta indica gum: | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 32879–32890 | |
41 | A. Muthu Manokar, | Effect of fins and silicon dioxide nanoparticle black paint on the absorber plate for augmenting yield from tubular solar still | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 35102–35112 | |
42 | A. Muthu Manokar, | Recent advancements, technologies, and developments in inclined solar still—a comprehensive review | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 35346–35375 | |
43 | A. Muthu Manokar, | A comparative energy and exergy efficiency study of hemispherical and single-slope solar stills | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 35649–35659 | |
44 | A. Muthu Manokar, | An experimental investigation of a water desalination unit using different microparticle-coated absorber plate: yield, thermal, economic, and environmental assessments | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 37371–37386 | |
45 | A. Muthu Manokar, | Phosphate bed as energy storage materials for augmentation of conventional solar still productivity | Environmental Progress & Sustainable Energy, ISSN:1944-7450, American Institute of Chemical Engineers, John Wiley & Sons | 40 | 4 | |
46 | A. Muthu Manokar, | Integrated Taguchi-GRA-RSM optimization and ANN modelling of thermal performance of Zinc oxide nanofluids in an automobile Radiator | Case Studies in Thermal Engineering, ISSN: 2214-157X, Elsevier | 26 | Article number: 101068 | |
47 | A. Muthu Manokar, | An Extensive Review on Thermodynamic Aspect Based Solar Desalination Techniques | Journal of Thermal Analysis and Calorimetry, ISSN:1588-2926, Springer | 145 | 1103–1119 | |
48 | A. Muthu Manokar, | Energy Exergy and Economic investigation of passive and active inclined solar still: Experimental Study | Journal of Thermal Analysis and Calorimetry, ISSN:1588-2926, Springer | 145 | 1091–1102 | |
49 | A. Muthu Manokar, | Sustainable potable water production from conventional solar still during winter season at Algerian dry areas | Journal of Thermal Analysis and Calorimetry, ISSN:1588-2926, Springer | 145 | 1215–1225 | |
50 | A. Muthu Manokar, | Performance Evaluation of Modified Solar Still using Aluminum Foil Sheet as Absorber Cover– a Comparative Study | Journal of Testing and Evaluation, ISSN: 0090-3973, American Society for Testing and Materials | 49 | 5 | JTE20200249 |
51 | A. Muthu Manokar, | Enhancing the Solar still output Using Micro/Nano-Particles of Aluminum Oxide at Different Concentrations: An experimental study, energy, exergy and economic analysis | Sustainable Materials and Technologies, ISSN: 2214-9937, Elsevier | 29 | e00291 | |
52 | A. Muthu Manokar, | Energy and exergy efficiency analysis of solar still incorporated with copper plate and phosphate pellets as energy storage material | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 48637 | |
53 | A. Muthu Manokar, | Experimental and empirical investigation of a CI engine fuelled with blends of diesel and roselle biodiesel | Scientific Reports, ISSN 2045-2322 | 11 | Article number: 18865 | |
54 | A. Muthu Manokar, | Experimental investigation of impact of the energy storage medium on the thermal performance of double pass solar air heater | Sustainable Energy Technologies and Assessments, ISSN: 2213-1388, Elsevier | 48 | Article number: 101673 | |
55 | A. Muthu Manokar, | Augmenting the productivity of stepped distiller by corrugated and curved liners, CuO/paraffin wax, wick, and vapor suctioning | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 56955–56965 | |
56 | A. Muthu Manokar, | A relative study on energy and exergy analysis between conventional single slope and novel stepped absorbable plate solar stills | Environmental Science and Pollution Research, ISSN:1614-7499, Springer | 28 | 57602–5761805 | |
57 | A. Muthu Manokar, | Investigating the effect of sensible and latent heat storage materials on the performance of a single basin solar still during winter days | Journal of Energy Storage, ISSN: 2352-152X, Elsevier | 44 | Article number: 103480, | |
58 | M Thirumurugan | Performance of fiber metal laminate composites embedded with Al and Cu wire mesh | Journal of Industrial Textiles | 51 | 4 | 540-558 |
59 | Thirumurugan M | The Addition of Polytetrafluroethylene and Graphite on Acrylonitrilebutadiene styrene and its effects on Mechanical and Tribological Characteristics | Advances in Design and Thermal Systems | 221-234 | ||
60 | Thirumurugan M | Mechanical Characteristics of Ethylene Vinyl Acetate Mixed Beeswax Fuel for Hybrid Rockets | Advances in Design and Thermal Systems | 389-400 | ||
61 | Thirumurugan M | Mechanical Characteristics of Paraffin Wax, Beeswax and HTPB as Rocket Propellant – A Comparative Study | Advances in Design and Thermal Systems | 243-252 | ||
62 | Jamesha Ibrahim K, Thirumurugan M,Jeyakumar P D, ArockiaJulias A, | Drilling Performance of Kenaf Fibre Reinforced Polymer Composites | Advances in Design and Thermal Systems | 291-300 | ||
63 | A. Muthu Manokar, | Flexural Behavior of Hybrid Layered Composites Suitable for Automotive Structural Applications | SAE Technical Paper | |||
64 | Basanta Kumar Behera, M. Thirumurugan | A study on visco-elastic, thermal and mechanical characteristics of injection molded ABS/graphite composite | Materials Today: Proceedings | |||
65 | A. Muthu Manokar, | Energy and exergy analysis of conventional acrylic solar still with and without copper fins | Environmental Science and Pollution Research | |||
66 | A. Muthu Manokar, | Experimental studies on passive iclined solar panel absorber solar still | Journal of thermal Analysis and Calorimetry, | |||
67 | Karunanithi, S. Rasool Mohideen, | “An exploration on microstructural observation and mechanical behavior of nanocrystallite Al 7017 alloy via mechanical alloying and uniaxial hot pressing”, | Materials Characterization | 171 | 110803 | |
68 | R. Karunanithi, S. Rasool Mohideen, | “A comprehensive exploration on the development of nano Y2O3 dispersed in AA 7017 by mechanical alloying and hot-pressing technique” | Ceramics International | 47 | 22924–22938 | |
69 | R. Karunanithi, M. | “A novel study on mechanically alloyed nanocrystalline Ti-6Al-4V alloy fabricated by spark plasma sintering” | Powder Metallurgy | 64 | 149-164 | |
70 | R Karunanithi, | “Influence of CeO2 reinforcement on microstructure, mechanical and wear behaviour of AA2219 squeeze cast composites” | journal of materials research and technology | 14 | 797-807 | |
71 | R Karunanithi, | “Beneficial effect of CeO2 on the corrosion behaviour of AA2219 squeeze cast composites–An experimental investigation” | Materials Letters | 297 | 129937 | |
72 | P. D. Jeyakumar, C. Arockia Julius, and M. Thirumurugan | Development of Onboard Engine Management System—Prediction of Oil Degradation | Advances in Design and Thermal Systems | 349-360 | ||
73 | A. Muthu Manokar, | Experimental investigation of an active inclined solar panel Absorber solar still – energy and exergy analysis | Environmental Science and Pollution Research | |||
74 | A. Muthu Manokar, | Experimental Studies on natural convection open and closed solar drying using external reflector | Environmental Science and Pollution Research | |||
75 | M.A. Sai Balaji, | Connecting business centres and establishing central nodal centres considering distance, population and real GDP as weights using the Weiszfeld algorithm and concept of minimum cost spanning tree – an analysis | International Journal of Services and Operations Management | 39 | 1 | 121-149 |
76 | MA Sai Balaji, A | ADAPTIVE CONTROL OF TOOL WEAR BY GREY WOLF OPTIMIZATION AND NEURAL CONTROLLER IN DRILLING | International Journal of Robotics and Automation | 36 | 1 | |
77 | M.A.Saibalaji | Comparative study of disc brake pads sold in Indian market — Impact on safety and environmental aspects | Environmental Technology & Innovation | 21 | ||
78 | M.A.Saibalaji | Experimental analysis and Validation of torsional stiffness of a Tubular space frame chassis | Materials Today: Proceedings | ISSN 2214-7853 | ||
79 | M. A. Sai Balaji, | Monitoring and Modeling of Cylindricity Error Using Vibration Signals in Drilling | Handbook of Smart Materials, Technologies, and Devices | |||
80 | MAS Balaji, | Prediction and Modeling of Tool Wear with Cutting Force and Fine Gaussian Support Vector Machine in Drilling | Advances in Design and Thermal Systems | pp 421-429 |
International Journal Publications (2020)
S.No. | Faculty Name | Publication |
---|---|---|
1. | Muthu Manokar A | Kabeel, A.E., RavishankarSathyamurthy,Muthu Manoka,r A, Swellam W. Sharshir, Essa, F.A., Ammar, H. Elshiekh, “Experimental study on tubular solar still using Graphene Oxide Nano particles in Phase Change Material (NPCM’s) for fresh water production”, Journal of Energy Storage,28(2020) 101204. |
2. | Muthu Manokar A | Arun Kumar, S, Suresh Mohan Kumar P, RavishankarSathyamurthy, Muthu Manokar, A, “A study of life cycle conversion efficiency and CO2 role in the pyramid shape solar stills – comparative analysis”, Elsevier, Groundwater for Sustainable Development, 11 (2020) 100413. |
3. | Ravikumar N, , Sivakumar C, Varun Kumar A, Balasrinivasan, M | Ravikumar Natarajan, Ravi, Sivakumar C, Varun Kumar Arulvizhi,Balasrinivasan, M, “Drag Optimization of Multi-Axle Commercial Vehicle Model using Ansys Fluent”, SAE International, ISSN 0148-7191. |
4. | Muthu Manokar A | SivakumarVaithilingam, SakthivelThirumalai Gopal, Senthil Kumar Srinivasan, Muthu Manokar, A, RavishankarSathyamurthy,GanapathySundaramEsakkimuthu, Ravinder Kumar, Mohsen Sharifpur, “An extensive review on thermodynamic aspect based solar desalination techniques”, Springer, Journal of Thermal Analysis and Calorimetry,09 October 2020. |
5. | Muthu Manokar A | Muthu Manokar, A, Vimala, M, Prince Winston, D, Rajendran, D.R., RavishankarSathyamurthy, Kabeel, A.E., “Year around distilled water production, energy and economic analysis of solar stills – A comparative study”, Heat Transfer Wiley, 2020;1-12. |
6. | Muthu Manokar A | Muthu Manokar, A, Vimala, M, Prince Winston, D, Rajendran, D.R., RavishankarSathyamurthy, Kabeel, A.E., “A comparative study of 3E (energy, exergy, and economy) analysis of various solar stills, Heat Transfer Wiley, 2020;1-16. |
7. | Muthu Manokar A | GurukarthikBabu Balachandran, Prince Winston David, GokulRajendran, Mohamed Nasrulla Akbar Ali, VigneshRadhakrishnan, RamkumarBalamurugan, MuthumanokarAthikesavan, RavishankarSathyamurthy, “Investigation of performance enhancement of solar still incorporated with Gallus gallusdomesticus cascara as sensible heat storage material, Springer Environmental Science and Pollution Research, 20 August 2020. |
8. | Muthu Manokar A | RajendranDuraisamyRamalingam, GanapathySundaramEsakkimuthu, JawaharPaulraj, KabeelAbdElnaby, MuthumanokarAthikesavan, RavishankarSathyamurthy, SivakumarVailthilingam, “Inferences on the effects og geometries and heat transfer fluids in multi-cavity solar receivers by using CFD”, Springer Renewable Energy and Water Sustainability, 10 December 2019. |
9. | Varun Kumar A and SelvakumarA S | Varun Kumar Arulvizhi and SelvakumarAlandurSomasundaram, BSACIST, “Free Vibrational characteristics of Dual Side Nd:YAG Laser Welded Stainless steel 304 joints reinforced with Al2O3, Micro Powder Particles”, SAE International, ISSN 0148-7191. |
10. | Muthu Manokar A | Muthu Manokar, A, “Experimental study on effect of different mass flow rate in an inclined solar panel absorber solar still integrated with spiral tube water heater”, 13th Gulf Water Conference – Water in the GCC: Challenges and innovative Solutions, 12-14 March 2019, Kuwait. |
11. | Muthu Manokar A | Shanmugan S, Essa F.A., Shiva Gorjianc, Kabeel A.E., RavishankarSathyamurthy, Muthu Manoka,r A “Experimental study on single slope single basin solar still using TiO2nano layer for natural clean water invention”, Elsevier, Journal of Energy Storage, 30 (2020), 101522, May 2020. |
12. | Muthu Manokar A | Essa F.A., Ammar H Elsheikh, RavishankarSathyamurthy, Muthu Manokar, A, Kandeal, A.W., Shanmugan, S, Kabeel A.E., Swllam W. Sharshir, Hitesh Panchal, Younes M.M., “Extracting water content from the ambient air in a double-slope half-cylindrical basin solar using silica gel under Egyptian conditions, Elsevier, Sustainable Energy Technologies and Assessments, 39(2020) 100712. |
13. | Muthu Manokar A | Muthu Manokar, A, YazanTaamneh, AbdElnabyKabeel, Prince Winston D, Vijayabalan, P, Balaji D, RavishankarSathyamurthy, PadmanabaSundar S, Mageshbabu D, “Effect of water depth and insulation on the productivity of an acrylic pyramid solar still – An experimental study”, Elsevier, Groundwater for Sustainable Development, 10(2020) 100319. |
14. | Thirumurugan, M | PrabuKrishnasamy, Rajamurugan, G and Thirumurugan, M, “Performance of fiber metal laminate composites embedded with AL and CU wire mesh”, SAGE, Journal of Industrial Textiles, 0(0) 1-18. |
15. | Muthu Manokar A | RavishankarSathyamurthy, AbdElnabyKabeel, MadhuBalasubramanian, MageshbabuDevarajan, Swellam W Sharshir, Muthu Manokar, A, “Experimental study on enhancing the yield from stepped solar still coated fumed silica nanoparticle in black paint, Elsevier Materials Letters, 272 (2020) 127873. |
16. | Muthu Manokar A | Mohammed El HadiAttia, ZiedDriss, MuthManokar, A, RavishankarSathyamurthy, “Effect of aluminum balls on the productivity of solar distillate, Elsevier, Journal of Energy Storage, 30 (2020) 101 466. |
17. | Muthu Manokar A | GurukarthikBabu Balachandran, Prince Winston David, PadmanabanVelayudhaperumalChellam, Mohamed Nasrulla Akbar Ali, VigneshRadhakrishnan, RamkumarBalamurugan, Muthu Manokar, A, “Rehash of cooked oil for the palatable water production using single slope solar still”, Elsevier, Fuel, 271 (2020) 117613. |
18. | Muthu Manokar A | KamleshPansal, Bharat Ramani, KishorkumarSadasivuni, Hitesh Panchal, Muthu Manokar, A,RavishankarSathyamurthy, Kabeel. A.E, Suresh. M, Mohammad Israr, “Use of solar photovoltaic with active solar still to improve distillate output: A review”, Elsevier, Groundwater for Sustainable Development, 10 (2020) 100341.` |
19. | Varun Kumar A and Selvakumar AS | Varun Kumar Arulvizhi and SelvakumarAlandurSomasundaram, “Nd:YAG Laser Welded Stainless steel 304: The effects of Al2O3, Micro Particles Addition”, SAE International, SAE Technical Paper 2020-28-0418-2020. |
20. | Ravikumar S and Muralidharan V | Ravikumar, S, Kanagasabapathy, H, Muralidharan, V, “Multi-component Fault Diagnosis of Self Aligning Troughing Roller (SATR) in Belt Conveyor System using Decision Tree – a Statistical Approach”, Faculty of Mechanical Engineering, FME Transactions (2020) 48, 364-371. |
21. | Ravikumar S and Muralidharan V | Ravikumar, S, Muralidharan, V, Ramesh, P, CheranPanidan, “Fault Diagnosis of Self Aligning conveyor Idler in Coal Handling Belt conveyor system by statistical features using random forest algorithm”, Springer Nature, Singapore Pte Ltd., 2021, 978-984-15-7241-8_16. |
22. | SathickBasha K | Nagarajan, K.J., Balaji, A.N., SathickBasha, K, Ramanujam, N.R., Ashok Kumar, R, “Effect of agro waste a-cellulosic micro filler on mechanical and thermal behavior of epoxy composites, Elsevier, International Journal of Biological Macromolecules, 152 (2020) 327-339. |
23. | Muthu Manokar A | Mohammed El HadiAttia, Karthick, A, Muthu Manokar, A, ZiedDriss, AbdElnabyKabeel, RavishankarSathyamurthy, Mohsen Sharifpur, “Sustainable potable water production from conventional solar still during the winter season at Algerian dry areas: energy and exergy analysis”, Springer, Journal of Thermal Analysis and Calorimetry, 10973-020-10277-x. |
24. | Sai Balaji, M.A. | BaskaraSethupathi, P, Chandradass, J, Sai Balaji, M.A., “Comparative study of disc brake pads sold in Indian market – Impact on safety and environmental aspects”, Environmental Technology & Innovation, https://doi.org/10.1016/j.en.2020.101245. |
25. | Mohamed Bak, K | Lokeshkumar, J, Ramasamy, N and Mohamed Bak, K, “Compressive response on Kevlar hybrid Composite Pipe under Sea Water Environment”, AIP Publishing, 978-0-7354-4013-5/$30. |
26. | Sirajudeen N and Abdur Rahman M | Sirajudeen, N, and Abdur Rahman, M, “Influence of aging and mass fraction of Al2O3 on Mechanical Properties of Al6082/Al2O3 composite produced by stir casting”, Metal Science and Heat Treatment, Vol.62, Nos.3-4, July, 2020 (Russian Original Nos.3-4, March-April, 2020). |
27. | Mahashar Ali, J, and Siddhi Jailani, H | Mahashar Ali, J, Siddhi Jailani, H, Murugan, M, “Surface roughness evaluation of electrical discharge machined surfaces using wavelet transform of speckle line images”, Elseivier, Measurement, 149 (2020) 107029. |
28. | Mahashar Ali, J, and Siddhi Jailani, H | Mahashar Ali, J Siddhi Jailani, H, MuruganMariappan, Mohamed Fahad, S, “Optical surface roughness evaluation of ground specimens using speckle line images”, SAE International, 2020-28-0514, Published 25 Sep 2020. |
29. | SerajulHaque | Ravindra Pathak, SerajulHaque, “Characterization of Expanded Polystyrene by Pyrolysis Process for Plastic Waste to Fuel”, International Journal of Advanced Sciences and Technology”, Vol.29, No.7 (2020), pp.11643-11651. |
30. | SerajulHaque | Ravindra Pathak, SerajulHaque, “Experimental Evaluation of Low-Density Polyethylene by Pyrolysis Route”, International Journal of Advanced Science and Technology, Vol.29, No.7 (2020), pp.13652-13661. |
31. | Muthu Manokar A | Chandrika, V.S., Mohamed Thalib, M, AlagarKarthick, RavishankarSathyamurthy, Muthu Manokar, A, UmashankarSubramaniam and Stalin, B, “Performance assessment of free standing and building integrated grid connected photovoltaic system for southern part of India”, Building Services Engineering Research & Technology, DOI:10.1177/0143624420977749. |
32. | Muthu Manokar A | Sriharikota Chandra Sekhar, KaruppasamyKaruppasamy, Vedaraman, N, RavishankarSathyamurthy, PalanimuthuVijayabalan, Ammar Elshiekh, VinayagamNandanakumar, Athikesavan Muthu Manokar, “Process optimization and characterization of manila tamarind seed oil extracted by the soxhlet method”, International Journal of Energy for a Clean Environment”, 22(1):31-52 (2021). |
33. | Muthu Manokar A | Asif Afzal, Mohammed Samee, A.D., Jilte R.D., Md. Tariqul Islam, Muthu Manokar, A, Kaladgi Abdul Razak, “Battery thermal management: An optimization study of parallelized conjugate numerical analysis using Cuckoo search and Artificial bee colony algorithm”, Elsevier – International Journal of Heat and Mass Transfer, 0017-9310/2020. |
34. | Muthu Manokar A | Mohammed El HadiAttia, ZiedDriss, AbdElnabyKabeel, KarthickAlagar, Muthu ManokarAthikesavan, RavishankarSathyamurthy, “Phosphate bags as energy storage materials for enhancement of solar still performance”, Environmental Science and Pollution Research, https://doi.org/10.1007/s11356020-12018-x. |
35. | Muthu Manokar A | Vignesh Kumar Ramalingam, AlagarKarthick, Manoj Praveen VijayanJeyalakshmi, Arul Marcel Moshi Antony Joseph Decruz, Athikesavan Muthu Manokar, RavishankarSathyamurthy, “Enhancing the fresh water produced from inclined cover stepped absorber solar still using wick and energy storage materials”, Environmental Science and Pollution Research, , https://doi.org/10.1007/s11356020-12018-x1. |
36. | Muthu Manokar A | Mohammed El HadiAttia, ZiedDriss, AbdElnabyKabeel, Asif Afzal, Muthu Manokar, A, RavishankarSathyamurthy, “”Phosphate bed as energy storage materials for augmentation of conventional solar still productivity”, Environmental Progress & Sustainable Energy, DoI:10.1002/ep.13581. |
37. | Md. Javeed Ahmed | Stephen Bernard, S, Jayakumari, L.S., Md. Javeed Ahmed, Arulmurugan, S, “Tribological and mechanical properties of biobased reinforcement in a friction composite material”, REVISTAMATERIA, V.25 N.03, ISBN 1517-7076 artigo e-12785-2020. |
38. | , Karunanithi, R | Showkat Ali, Karunanithi, R, Prashanth, M, &Sivasankaran, S, “A novel study on mechanically alloyed nanocrystalline Ti-6Al-4V fabricated by spark plasma sintering”, Taylor & Francis, Powder Metallurgy, https://doi.org/10.1080/00325899.2020.1867.391 |
39. | Muthu Manokar A | ManzooreElahi M, Asif Afzal, Mohammad Reza Safaei, Muthu Manokar, A, Ahmed, I, EL-Seesy, Mujtaba, M.A., Olusegun David Samuel, Irfan AnjumBadruddin, Waqar Ahmed, Kiran Shahapurkar, MarjanGoodarzi, “Investigation on the effect of cottonseed oil blended with different percentages of octanol and suspended MWCNT nanoparticles on diesel engine characteristics”, Journal of Thermal Analysis and Calorimetry, https://doi.org/10.1007/s10973-020-10293-x. |
40. | Muthu Manokar A | RavishankarSathyamurthy, Kabeel, A.E., Ali Chamkha, AlargarKarthick, Muthu Manokar, A, Sumithra. M.G., “Experimental Investigation on cooling the photovoltaic panel using hybrid nanofluids”, Springer, Applied Nanoscience, http://doi.org/10.1007/s13204-020-01598-2. |
41. | Muthu Manokar A | Ali J. Chamkha, DsilvawinfredRufuss, D, Kabeel, A.E., RavishankarSathyamurthy, Mohammed Abdelgaid, Muthu Manokar, A, Madhu, B, “Augmenting the potable water produced from single slope solar still using CNT-doped paraffin wax as energy storage: an experimental approach”, Springer, Journal of the Brazilian Society of Mechanical Sciences and Engineering, (2020) 42:625, https://doi.org/10.1007/s40430-020-02703-w. |
42. | Muthu Manokar A | Essa, F.A., Omara, Z.M., Abdullah, A.S., Shanmugan, S, Hitesh Panchal, Kabeel, A.E., RavishankarSathyamurthy, Wissam H. Alawee, Muthu Manokar,Kabeel, A. E., MuthuManokar, A., Sathyamurthy, R., Prince Winston, D., El-Agouz, S. A., &Chamkha, A. J, “A review on different design modifications employed in inclined solar still for enhancing the productivity,” Journal of Solar Energy Engineering, vol. 141, no. 3, pp.1-12, 2019. |
43. | Muthu Manokar A | Kabeel, A.E., RavishankarSathyamurthy, Swellam W. Sharshir, Muthumanokar, A, Hitesh Panchal, Prakash, N, Prasad, C, Nandakumar, S, El Kady, M.S., “Effet of water depth on a novel absorber plate of pyramid solar still coated with TiO2 nano black paint”, Elsevier, Journal of Cleaner Production, 213(2020) 185-91. |
44. | Asrar Ahmed, K, RasoolMohideen S Surya RajanB | Asrar Ahmed, K, RasoolMohideen, S, Balaji, M.A.S., Surya Rajan, B, “Tribological Performance of Brass Powder with Different Copper and Zinc Content in the Brake Pad”, Tribology in Industry, Vol.42, No.2(2020) 177-190. |
45. | Surya Rajan B | Logesh, K, Hariharasakthisudhan, P, Surya Rajan, B, Arul Marcel Moshi, A, Khalkar, V,” Effect of multi-walled carbon nano-tube on mechanical behavior of glass laminate aluminum reinforced epoxy composites”, Wiley, Polymer Composites, DOI:10.1002/pe.25757 |
46. | Surya Rajan B | Hariharasakthisudhan, P, Surya Rajan, B and Sathickbasha, K, “Inspiration of reinforcements, manufacturing methods, and microstructural changes on wear behavior of metal matrix composites – a recent review”, Materials Research Express, 7(2020)012006. |
47. | Surya Rajan B and Sathickbasha K | Logesh, K, Hariharasakthisudhan, P, Arul Marcel Moshi, A, Surya Rajan, B and Sathickbasha, K, “Mechanical properties and microstructure of A356 alloy reinforced AIN/MWCNT/graphite/AI composites fabricated by stir casting”, Materials Research Express, 7(2020)015004. |
48. | Surya Rajan B and Sathickbasha K | Ponnarengan, Hariharasakthisudhan, LogeshKamaraj, Surya Rajan Balachandran, and SathickbashaKatharBasha. “Reusing exhausted alkaline battery powder as reinforcement in AA6061 composites and mechanical characterization.” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects (2020): 1-14. |
49. | Sathickbasha, K and Surya Rajan B | Hariharasakthisudhan, P, Sathickbasha, K, Surya Rajan, B and Jeyanthram, V, “Steady-state wear Behavior of Multi-Scale Hybrid Composite – AA6061/Al2O3 (mm)/EN31 Steel Tribo System”, Journal of Tribology, January 2020, Vol.142/011702-1. |
50. | Sathickbasha, K and Surya Rajan B | Sathickbasha, K., A. S. Selvakumar, Surya Rajan Balachandran, and P. Hariharasakthisudhan. “Multi-metal sulfide pre-blend combination on the tribological performance of the brake friction material.” Industrial Lubrication and Tribology (2020). https://doi.org/10.1108/ILT-07-2020-0249. |
International Journal (2009-2019)
S.No | Year | Name of the staff | Publications |
---|---|---|---|
1 | 2009 | J. MAHASHAR ALI & M.MURUGAN | J.Mahashar Ali, M.Murugan, ‘Influence of chip breaker location and angle on chip form in turning low carbon steel’, Int. J. Machining and Machinability of Materials, Vol. 5, No. 4, pp.452–475 |
2 | 2009 | PERIASAMY V M | A.Elango, V.M.Periyasamy, M.Paramasivam,’Study on polyaniline-ZnO used as corrsosion inhibitors of 57S aluminium in 2M NaOH solution’, Anti-corrosion methods and materials, Vol.56, 5 pp-266-270. |
3 | 2009 | PERIASAMY V M | K.Subramanian, V.M.Periasamy, M.Pushpavanam, K.Ramasamy, ’Predictive modeling of copper in electro-deposition of bronze using regression and neural networks’, portugulia electro chemical acta 27(1),pp-47-55 |
4 | 2009 | PERIASAMY V M | K.Subramanian, V.M.Periasamy, MalathyPushpavanam, K.Ramasamy ’Predictive modeling of deposition rate in electro-deposition of copper-tin using regression and Artificial Neural Network’, Journal of Electro analytical Chemistry, Volume.636,Issues 1-2,pp-30-35 Nov-2009 |
5 | 2009 | PERIASAMY V M | K.Ramanathan, V.M.Periasamy, M.Pushpavanam, V.Natarajan, ‘Paricle swarm optimization of hardness in nickel diamond electro composites’, Archives Computational Materials Science And Surface Engineering, Vol.1,issues- 4,pp:232-236, 2009. |
6 | 2009 | V.M.PERIASAMY | K.Ramanathan, V.M.Periasamy, MalathyPushpavanam, V.Natarajan, ‘Optimization of hardness of Nickel Diamond Electro Composites using Genetic Algorithm’, ZastitaMaterijala, Volume.50, 3, pp 162-166, 2009. |
7 | 2010 | RAJENDRAN.R | R Rajendran W.Sha., R.ElansezhianAbrasive wear resistance of electroless nicked coated aluminium after post treatment, Surface and Coatings technology, Vol. 205 (3),2010, 766-772. |
8 | 2010 | RASOOL MOHIDEEN. S | S Rasool Mohideen, A.M.AhmaedZaidi, “Influence of Post Weld Heat Treatment on the HAZ of Low Alloy Steel Weldments”, Int. Journal of Integrated Engineering, 2010, Vol 2 (1), p9. |
9 | 2010 | RASOOL MOHIDEEN. S | S.Mazhan, A.M.AhmedZaidi, M.I.Gazali, N. Arsat, M.N.M. Hatta , S. Rasool Mohideen, “Mecahnical Properties of Medium Density Fiber board Composite Material Using Recycled Rubber and Coconut Coir”, ”, Int. Journal of Integrated Engineering, 2010, Vol 2 (1), p21. |
10 | 2010 | RASOOL MOHIDEEN. S | Mazhan.S, A.M.AhmedZaidi, M.I.Gazali, N. Arsat, M.N.M. Hatta , S. Rasool Mohideen, “Study on Sound Absorption Properties of Coconut Coir Fiber Reinforced Composite with Added Recycled Rubber ”, Int. Journal of Integrated Engineering, 2010, Vol 2 (1), p21. |
11 | 2010 | RASOOL MOHIDEEN. S | Rasool Mohideen. S, Ahmad Mujahid Ahmad Zaidi,Investigation on Fracture Behavior of Low Alloy Steel Weldments Subjected to Controlled Cryogenic Treatment”, International Journal of Advances in Mechanics and Applications of Industrial Materials, Vol. 1 (1) 2010. |
12 | 2010 | V.M.PERIASAMY | Subramanian.K, Perisamy,V.M., Paramasivam, MalathyPurshpavanam, Ramasamy.K, “ Prediction of Cathode Efficiency in Electro Deposition of Copper – tin using Regression and Artificial Neural Network Model”.Journal of Electro Analytical Chemistry, Vol.648, issue-2, pp-176-183, October 2010. |
13 | 2010 | V.M.PERIASAMY | A.Elango, V.M.Periyasamy, M.Paramasivam,Rakesh.E , “Novel Polymeric Inhibitor for corrosion of 578 Aluminium in 2M NaOH solutions”. Anti corrosion Methods and Materials, Vol.57, PP3-5, 2010 |
14 | 2010 | V.M.PERIASAMY | K.Ramanathan, V.M.Periasamy, MalathyPushpavanam, “Maximizing Hardness of Nickel Diamond Composites Metal Matrix using PSO” International Journal of Computational Material Science and Surface Engineering, vol.#, No.4,2010 |
15 | 2011 | J.BHASKARAN | Bhaskaran, M.Murugan, N.Balashanmugam, P.V.Shashikumar, ” Performance and tool wear characteristics of Cubic boron Nitride cutting tools during hard turning of steel ” in the International Journal of Mechanical and Material Engineering |
16 | 2011 | J.BHASKARAN | J.Bhaskaran, M.Murugan, N.Balashanmugam, P.V.Shashikumar, M. Chellamalai, “Monitoring of hard turning using acoustic emission signal” in the Journal of Mechanical Science and Technology (JMST).Paper Number: J2011-1270R2 – |
17 | 2011 | KASIMAYAN. T | B. Neethi Simon, T. Kasimayan, and K. Ramesh. The influence of ambient illumination on colour adaptation in three fringe photoelasticity, Optics and Lasers in Engng., 2011, 49(2), 258 – 264 (in press) |
18 | 2011 | RAJENDRAN.R | Wei Sha, Eric A. Wilson, Raj Rajendran, SavkoMalinov, Harvey R. Charlesworth, Lee Ibbitson, “Fracture Surface, Impact Energy and Hardness of Ni-Free High-Mn SteelsMicroscopy and Analysis”, Journal of Microscopy.Published on behalf of the Royal Microscopical Society, Volume: 242 / 2011, Nov 2011.Impact Factor: 1.872. |
19 | 2011 | PERIASAMY V M | K.Subramanian, MalathyPurshpavanam, V.M.Periasamy, “Predictive Modelling and Optimization of tin in Electro- Disposition of Bronze using Response Surface Methodology”, International Journal Of Computer Aided Engineering and Technology , Vol -3, No. 5-6/2011,pp.570-582. |
20 | 2011 | MURUGAN.M | Bhaskaran, M.Murugan, N.Balashanmugam, P.V.Shashikumar, ” Performance and tool wear characteristics of Cubic boron Nitride cutting tools during hard turning of steel ” International Journal of Mechanical and Material Engineering, Vol.6, No.3, 419-424, 2011. |
21 | 2011 | PERIASAMY V M | P.Narasimham, MalathyPurshpavanam, V.M.Periasamy, “Synthesis, charachterisation and Comparison of sediment Electro-co-deposited Nickel- Micro and Nano Sic composites”, Applied Surface Science , vol. 258, Issue -1, pp. 5980-598, October-2011 |
22 | 2012 | PERIASAMY V M | P.Narasimham, MalathyPurshpavanam, V.M.Periasamy,, “Wear and scratch resistance Charachteristics of Electrodeposited Nickel Nano and Micro Sic Composites, Applied surface science, Volumes 292–293, 15 July 2012, Pages 197–206 |
23 | 2012 | PERIASAMY V M | P. Narasimman, MalathyPushpavanam, V.M. Periasamy,” Effect of Surfactants on the Electrodeposition of Ni-SiC Composites”, Portugaliae Electrochemica Acta, Vol 30, pp.1-14, 2012. |
24 | 2012 | RASOOL MOHIDEEN. S, NASREEN KALEEM | S.Rasool Mohaideen, Nasreen Kaleem, Touseef.”Material Characterization of 316l Stainless Steel after being Subjected to Cryogenic Treatment.”, International Journal of Mechanical and Industrial Engineering (IJMIE) ISSN No. 2231 –6477, Vol 2, July 2012. |
25 | 2012 | R. RAJENDRAN & RASOOL MOHIDEEN. S | S.Thamizhmanii, Rajendran, Rasool Mohideen and Sulaiman,Investigation on Surface Integrity on STAVAX ESR AISI 420 Martensitic Stainless steel by cryogenically treated Steel Balls with Low Plastics Burnishing Tool Key, Engineering Materials . Vol: 504-506 (2012) pp. 1347-1352 |
26 | 2012 | R. RAJENDRAN & RASOOL MOHIDEEN. S | S.Thamizhmanii, Rajendran, Rasool Mohideen and Sulaiman, Performance Evaluation of Cryogenically Treated Worn CBN Insert by Turning Process, Key Engineering Materials Vols. 504-506 (2012) pp 1323-1328 |
27 | 2012 | P.D.JEYKUMAR | P. D. Jeyakumar,G. Devaradjane, Rollover Analysis of Bus Body Structure,European Journal of Scientific Research, ISSN 1450-216X Vol.71 No.1 (2012), pp. 64-71 |
28 | 2012 | MURUGAN.M | J. Bhaskaran, M.Murugan, N. Balashanmugam, P.V.Shashikumar, M. Chellamalai, “Monitoring of hard turning using acoustic emission signal” Journal of Mechanical science and Technology, 26(2), 609-615, 2012, Springer |
29 | 2012 | SELVAKUMAR. A.S | Selvakumar..A.S., Kalaichelvan.K., Venkataswamy.S, “Effect of heat treatment process on hydroforming of tubular material “Euorpean journal of Scientific research, Vol-68, No.3, pp-377-388, 2012 |
30 | 2012 | Varun Kumar A | Varun Kumar A, Balachandar, ” Effect of Welding Parameters on Mettalurgical Properties of Friction Stir Welded Aluminium Alloy 6063-O”,Journal Of Applied Sciences,Vol. 12, (12): pp-1255-1264. |
31 | 2012 | MURUGAN.M | Jeyaboovan, M.Murugan, ClemantBovas, “Statistical Analysis of Surface Roughness Measurements Using Laser Speckle Images” IEEE, pp: 378- 383, 2012 |
32 | 2012 | P.SREEDHAR | P.Sreedhar, Ëxperimental Investigation of Surface Roughness for Fused Deposition Modelled Part with Different Angular Orientation”, International Journal of Advanced Design and Manufacturing Technology, Vol.5, pp. 21-28 |
33 | 2012 | S.SUNDARAVALLI | S.Sundaravalli, Majumder .C,G.K.Vijayaraghvan,”Ëffect of Thermal properties of delaminated fibre metal laminate”, International Journal of Emerging Technology and Advanced Engineering, Vol.2 (2012) |
34 | 2012 | S.SUNDARAVALLI | S.Sundaravalli, Majumder .C,G.K.Vijayaraghvan,”Analysis of delamination sequencing in multi stack fibre metal laminate”, International Journal of Engineering Research & Technology, Vol.1 (2012) |
35 | 2013 | V.M. PERIASAMY | S. SathikBasha, V.M. Periasamy, M. Kamaraj, and S.M. Shariff, Improvement of Slurry Erosion Wear Resistance of 16Cr-5Ni Martensite Stainless Steel by LSA and LTH”, Journal of Materials Engineering and Performance, Vol.22, pp.3689-3698, 2013. |
36 | 2013 | MURUGAN.M | Jeyaboovan, M.Murugan, “Surface roughness classification using image processing”, Mesurement46(2013), pg. (2065-2072) Elsevier, 2013 |
37 | 2013 | RAJENDRAN.R | Eng. V.I. Semenov a+,L.Sh. Shuster,S.-J. Huang b,R. Rajendran, ” Estimation Of Tribological Properties Of Low And Medium-Carbon Steels After Heat Treatment And Severe Plastic Deformation” |
38 | 2013 | RAJENDRAN.R | M. Franco, W. Sha ,, S. Malinov b, R. Rajendran. “Phase composition, microstructure and microhardness of electroless nickel composite coating co-deposited with SiC on cast aluminium LM24 alloy substrate., Surface & Coatings Technology, Elsevier. 31st Aug, 2013. pp- |
39 | 2013 | GUNASEKERAN V | Gunasekaran V, Prasanth R, Narayanan M Ëxperimental investigation and finite elemental analysis of filament wound GRP pipes for underground Application”, Procedia Engineering, 64, pp. 1293 -1301, 2013. |
40 | 2013 | S.SIVAKUMAR | S.Sivakumar, V.Dhanalaxshmi, “A feature-based system for CAD/CAM interpretation for step file for cylindrical parts”, Indian Journal of Engineering and Material Science, Vol. 20, pp. 21 -26, 2013. |
41 | 2013 | P.D.JEYAKUMAR | P.D.Jeyakumar, G.Devaradjane, Ënergy absorption by square, circular, pentagonal and Hexagonal steel tubes under impact loading for Automotive crush box application”, International Review of Mechanical Engineering (IREME) , Vol.7, pp. 1421 -1426, (2013) |
42 | 2013 | S.SUNDARAVALLI | S.Sundaravalli, Majumder M C, G.K.Vijayaraghavan,”Transient Thermal analysis of thickness variation on fibre metal laminates”, European journal of Scientific Research, Vol. 113, pp.604 – 615, (2013) |
43 | 2013 | S.SUNDARAVALLI | S.Sundaravalli, Majumder M C, G.K.Vijayaraghavan,”Modeling and simulation of delamations in FML using step pulsed active thermography”, International Journal of Mechanical, Industrial Science and Engineering, Vol 7, (2013) |
44 | 2013 | M.BALAJI | M.Balaji, Öptimization of piping layout with respect to pressure and temperature using Caeser-Li”,Mechanica Confab,Vol.2, pp.57 – 62, (2013) |
45 | 2014 | V.M.PERIASAMY | S.SathikBasha, V.M.Periasamy,M.Kamaraj, “Slurry Erosion Resistance of Laser – modified 16 Cr – 5 Ni Stainless Steel”, International journal of Chem Tech Research,Vol, 6,pp.691 – 704, (2014) |
46 | 2014 | S. Beer Mohammed | K.Kaviyarasu, E.Manikandan, P.Paulraj, S.Beer Mohammed, J.Kennedy, “One dimensional well-aligned CdOnanocrystal by solvothermal method”, Journal of Alloys and Compounds,Vol593 (2014) pp.67-70. |
47 | 2014 | HaiderNasreen, S. Beer Mohammed, S.Rasool Mohideen | HaiderNasreen, S. Beer Mohamed, S. Rasool Mohideen “Microstructural Analysis and Wear Behavior of Cryogenically Treated Ti-6Al-4V Alloy”Applied Mechanics and Materials, Trans Tech Publications, VolS. 592-594 (2014), pp 1331-1335. |
48 | 2014 | V.Muralidharan | V. Muralidharan, V. Sugumaran, V. Indira “Fault diagnosis of monoblock centrifugal pump using SVM” Engineering Science and Technology, Vol 17, (2014), pp.152-157. |
49 | 2014 | V.Muralidharan | V.Muralidharan,S.Ravikkumar,H.Kangasabapathy,”Condition monitoring of Self aligning carrying idler (SAI) in belt-conveyor system using statistical features and decision tree algorithm”, Measurement, Vol.58, (2014) pp. 274 – 279,. |
50 | 2014 | V.Muralidharan | V.Muralidharan,V.Sugumaran, N.R.Sakthivel, “Fault Diagnosis of Centrifugal pump using Stationary wavelet Features and Bayes Algorithm”, AJSAT, Vol 3, (2014), pp.1-4. |
51 | 2014 | A Varunkumar, M.Balasrinivasan | A.Varunkumar, M.Balasrinivasan, K.Balachandar, “Numerical analysis of flow stress and temperature distribution of friction stir welded aluminium alloy 6063 –O”, International Journal of Engineering, Vol .1, (2014) pp.1-8. |
52 | 2014 | A.ArockiaJulias | A.ArockiaJulias,Velamurali, “Effect of carbon fiber position on the impact behavior of glass/carbon fiber hybrid composite laminated”,International journal of Applied engineering research,ISSN 0973-4562 Vol.9 No.26 (2014) PP.9103-9106. |
53 | 2014 | K.Sureshkumar | S.P.Venkatesan,P.N.Kadiresh,K.sureshkumar, “Experimental investication of auueous cerium oxide nanofluid blend in diesel engine”,Advanced materials research,Vol.938(2014),PP 286-291. |
54 | 2015 | R.Sathish Kumar, K.Sureshkumar | R.Sathishkumar, K.Sureshkumar, R.Velraj, “Optimization of biodiesel production from Manilkarazapota (L) seed oil using Taguchi method”, Fuel, Vol 140, (2015) pp.90-96 |
55 | 2015 | R.Sathish Kumar, K.Sureshkumar | R.Sathish Kumar, K.Sureshkumar,” Effect of methanol blending with Pongamiapinnata biodiesel and diesel blends on engine performance and exhaust emission characteristics of an unmodified Compression Ignition engine”,International Journal of Ambient Energy, vol 36,(2015), pp. 70-75. |
56 | 2015 | R.Rajaraman | Baskar S, Rajaraman R, “Airflow Management in Automotive Engine Cooling System-Overview”, International Journal of Thermal Technologies, Vol 5, (2015), pp.1-8. |
57 | 2015 | A.ArokiaJulias | A.ArokiaJulias, and Vela Murali, “ Experimental impact study on unidirectional glass-carbon hybrid composite laminates”, Scientific Engineering Composites Materials, pp. 1-8, April 2008. |
58 | 2015 | J. Mahashar Ali | J.DaraniPriya, J. Mahashar, “ Design of a Measurement System for Surface Roughness using speckle Images”, Vol.2, Iss. 2,pp.300-305, April 2015. |
59 | 2015 | T.R. Tamilarasan, R. Rajendran | T.R. Tamilarasan, R. Rajendran , G. Rajagopal , J. Sudagar,” Effect of surfactants on the coating properties and corrosion behaviour of Ni–P–nano-TiO2 coatings” Surface & Coatings Technology,Vol. 276, pp.320-326,Aug.2015 |
60 | 2015 | T.R. Tamilarasan, R. Rajendran | T.R. Tamilarasan, U. Sanjitha, R. Satisha, R. Rajendran , G. Rajagopal,” Tribological Performance Optimization of Electroless Ni-P-nano-TiO2 Coating Using Taguchi Method”, International Journal of Applied Engineering Research, Vol.10, Iss.57, pp.296-300. |
61 | 2015 | T.R. Tamilarasan,R. Rajendran | M. Siva sankar, T.R.Tamilarasan ,R.Rajendran,” Effect of bath loading on Electroless NiP-NanoTiO2”, International Journal of Applied Engineering Research, Vol.10, Iss.57, pp.317-322. |
62 | 2015 | R.Rajaraman | S.Baskar, R.Rajaraman,”Numerical Investigation on Airflow Distribution of Automotive Radiator”, International Review of Mechanical Engineering, Vol.9, Iss.4, pp. 417-422. |
63 | 2015 | T.R. Tamilarasan, R. SathishKumar, R. Rajendran | T.R. Tamilarasan, R. Sathish Kumar, R. Rajendran and G. Rajagopal,” Optimization of electroless Ni-P-nano-TiO2 Coating parameters using Taguchi method for corrosion performance” Applied Mechanics and Materials” 813-814, pp. 95-100. |
64 | 2016 | T.R. Tamilarasan, R. Rajendran | T.R. Tamilarasan, R. Rajendran “Wear and Scratch Behaviour of Electroless Ni-P-nano-Tio2 : Effect of Surfactants” Wear, 346-347, pp.148-157. |
65 | 2016 | R.Sathishkumar, K.Sureshkumar | R.Sathishkumar, K.Sureshkumar “ManilkaraZapota (L.) Seed Oil : A new third generation biodiesel Resource” WasteBiomass |
66 | 2016 | S. Beer Mohammed | A.Devarpiran, S. Beer Mohammed, A.ArunThangadurai, “ Fabrication and Mechanical properties of fly ash filled natural fiber epoxy composite” International Journal of science and innovative engineering and technology, 1(1), 6-12, 2016 |
67 | 2016 | R. Sathish Kumar and K. Sureshkumar | R. Sathish Kumar, K. Sureshkumar, ‘Manilkara zapota (L.) Seed Oil: A New Third Generation Biodiesel Resource’,Waste and Biomass Valorization,Vol 7, Issue 5, pp. 1115-1121, 2016. |
68 | 2016 | Rasool Mohideen. S | Rasool Mohideen. S, Thamizhmanii. S, Muhammed Abdul Fatah. M.M and W.Najmuddin W. Saidin, ‘Numerical Fracture Analysis of Cryogenically Treated Alloy Steel Weldments’Materials Science and Engineering, Vol 114, pp.1-16, 2016 |
69 | 2016 | Pervaz Ahmed Mouda, Siddhi Jailani Hydershah | Pervaz Ahmed Mouda,Siddhi Jailani Hydershah ,’ Sliding Wear Behavior of Cryogenic Treated Copper Beryllium Alloy’, Applied Mechanics and Materials, Vol 852, pp.391-396, 2016. |
70 | 2016 | V. Muralidharan | K.Radhakrishnan, V. Muralidharan, ‘ Optimization of Weld Parameters and Weld Bead Dimensions in Welding of 0.3%C-Cr-Mo-V Steel by Gas Tungsten Arc Welding Process’ Applied Mechanics and Materials, Vol 852, pp.178-184, 2016. |
71 | 2016 | M. Pervaz Ahmed,H. Siddhi Jailani,S. Rasool Mohideen | M. Pervaz Ahmed,H. Siddhi Jailani,S. Rasool Mohideen,A. Rajadurai, ‘ Effect of Cryogenic Treatment on Microstructure and Properties of CuBe2’, Metallography, Microstructure, and Analysis, Vol 5, Issue 6, pp..528-535. |
72 | 2016 | V. Muralidharan | V.Muralidharan, V.Sugumaran, ‘SVM-based wavelet selection for fault diagnosis of monoblock centrifugal pump’, Int. J. Data Analysis Techniques and Strategies, Vol 8, Issue 4, pp.357-369, 2016. |
73 | 2017 | H. Siddhi Jailani | C. K. Arvinda Pandian and H. Siddhi Jailani, ”Investigation of viscoelastic attributes and vibrational characteristics of natural fabrics-incorporated hybrid laminate beams”, Polymer Bulletin, Vol 75, No5, pp 1997–2014,May 2018 |
74 | 2017 | S. Prince Arockia Doss | Ganesan Selvam, Surya Prakash Vaithiyanathan, S. Prince Arockia Doss, Mohammed Zahir Abdullah and Vedantham Baskaran, “ Implementation of Lean Approaches in Proto Body Build to Improve Productivity and Flexibility”, SAE Technical Paper 2017 – 28- 1965 |
75 | 2017 | S. Prince Arockia Doss | Ganesan Selvam, Surya Prakash Vaithiyanathan, S. Prince Arockia Doss, Mohammed Zahir Abdullah and Vedantham Baskaran, “ Implementation of Lean Approaches in Proto Body Build to Improve Productivity and Flexibility”, SAE Technical Paper – vol 28 pp 1965,2017 |
76 | 2017 | H. Siddhi Jailani | H. Siddhi Jailani, A. Rajadurai, B. Mohan and T. Sornakumar, “Sliding Wear Behaviour of Al-Si Alloy – Flyash Composites produced by Powder Metallurgy Techniques” , Industrial Lubrications and Tribology, Vol. 69 No 2, pp.2041-2047, 2017 |
77 | 2017 | H. Siddhi Jailani | C.K. Aravida Pandian, H. Siddhi Jailani and A. Rajadurai, “Natural Fabric Sandwich Laminate Composites:Development and Investigation”, Bulletin of Material Science, Vol 40 No 1, pp.139-146, 2017 |
78 | 2017 | Pervez Ahamed and H. Siddhi Jailani | Pervez Ahamed and H. Siddhi Jailani, “ Effect of Cryogenic Treatment of Copper Electrode on Electro-Discharge Machining” SAE Technical Paper, 2017-28-1962 |
79 | 2017 | J. Mahashar Ali and M. Murugan | J. Mahashar Ali and M. Murugan, “Surface Roughness Characterization of Turned Surfaces using Image Processing” Int. J. Machining and Machinability of Material”, Vol 19 No 4, pp. 394- 406,2017 |
80 | 2017 | B. Surya Rajan, M.A.Saibalaji | B. Surya Rajan, M.A.Saibalaji and C. Velmurugan, “Correlation of Field and Experimental Test Data of wear in Heavy Commercial Vehicle Brake Linings” Friction,Vol 5 No 1, pp. 56-65, 2017 |
81 | 2017 | T.R.Tamilarasan | T.R.Tamilarasan, U. Sanjith, M. Sivasankar and G. Rajagopal, “Effect of reduced grapheme oxide (rGO) on corrosion and erosion-corrsosion behavior of Electroless NiP coatings” Wear, Vol 390-391, pp. 385-391,2017 |
82 | 2017 | T.Venkatesan and R.Rajendran | Rajaanesh Ramamurthy, T.Venkatesan and R.Rajendran, “Solid Lubricant Assisted Machining – An Environmental Friendly Clean Technology to Improve the Surface Quality”. SAE Technical Paper, 28-1964,2017 |
83 | 2017 | G.Ramanjaneyalu and R.Rajendran | G.Ramanjaneyalu and R.Rajendran, “Study of Wear Behaviour of POM / Graphite- POM / MoS2 Composites”, SAE Technical Paper, 2017-28-1988 |
84 | 2017 | Dinesh Paulraj and R.Rajendran | Dinesh Paulraj, S.S.M. Abdul Majeed and R.Rajendran,” Influence of Nano Ti O2 particles on the properties and behavior of A356 Al metal matrix composites”, SAE Technical Paper, 28-1986,2017 |
85 | 2017 | R. Rajendran | M. Malathi, J. Herbert Mabel, R. Rajendran and N. Gowri Shankar, “ Ni-P Composite Plating on Piston Ring for Improved Wear Performance” SAE Technical Paper, 28-1977,2017 |
86 | 2017 | R. Rajendran | J. Purushothaman, Ramaseshan, S.K. Albert, R.Rajendran and N. Murugesan, “Preparation and Characterization of T – permeation barrier on RAFM steel : Influence of HDA melt composition and Super heat” Journal of Surface and Coating Technology, Vol 325, pp.697-707, 2017 |
87 | 2017 | MA Saibalaji | Sanjay, GR Arpitha, P Senthamaraikannan, M Kathiresan, MA Saibalaji, and B Yogesha,“The Hybrid Effect of Jute/Kenaf/E-Glass Woven Fabric Epoxy Composites for Medium Load Applications: Impact, Inter-Laminar Strength, and Failure Surface Characterization”,Journal of Natural Fibers,doi.org/10.1080/15440478.2018.1431828 , Jan 2018. |
88 | 2017 | Md Javeed Ahmed, MA Sai Balaji | Md Javeed Ahmed, MA Sai Balaji, SS Saravanakumar, Sanjay and P Senthamaraikannan, “Characterization of Areva javanica fiber–A possible replacement for synthetic acrylic fiber in the disc brake pad”, Journal of Industrial Textiles, doi.org/10.1177/1528083718779446 , May 2018. |
89 | 2018 | A. Muthu manokar | Muthu Manokar, D. Prince Winston, Ravishankar Sathyamurthy,A.E. Kabeel, A. Rama prasath, “Review of different methods employed in pyramidal solar still desalination to augment the yield of fresh water”,Desalination and Water Treatment,Vol.136, pp.20-30, 2018 |
90 | 2018 | A. Muthu manokar | Yazan Taamneh, A. Muthu manokar, A.E. Kabeel,S.A EI-Agouz, Ravishankar Sathyamurthy, Prakash, Prasad Chandran, “Experimental Analysis of inclined Solar Water Heater with Baffles” Chemical Engineering Transactions, Vol.71, pp.1339-1344, 2018 |
91 | 2018 | Mr. N. Sirajudeen, Dr. Serajul Haque, Mr. M. Abdur Rahman, Mr. P.V. Rangarao | Mr. N. Sirajudeen, Dr. Serajul Haque, Mr. M. Abdur Rahman, Mr. P.V. Rangarao “Microstructural Analysis and Hardness Enhancement of Mild Steel Plate Coated with Stellite6 Alloy by Friction Surfacing Method”, JETIR, Vol. 5, No., 2018 |
92 | 2018 | G. Rajesh | G. Rajesh, P. Malliga “Selection of Suppliers using Swara and Copras – G” International Journal of Enterprise Network Management, Vol.9, No.2. pp. 169 – 185,2018. |
93 | 2018 | B. Surya Rajan, M.A.Saibalaji | B. Surya Rajan, M.A. Sai Balaji “Effect of chemical treatment and fiber loading on physico-mechanical properties of Prosopis juliflora fiber reinforced hybrid friction composite” Materials Research Express, 2018 |
94 | 2018 | B. Surya Rajan, M.A. Sai Blaji, K. Sathickbasha | B. Surya Rajan, M.A. Sai Blaji, K. Sathickbasha, “Influence of Binder on Thermomechanical and Tribological Performance in Brake Pad”, Tribology in Industry, Vol.40, No.4, pp.654-669, 2018. |
95 | 2018 | A. Arokia Julias, R. Rajaraman | A. Arokia Julias, R. Rajaraman, Velamurali, “Effect of Fiber Orientation on the Delamination Behaviour of Glass-Carbon Hybrid Interface”, International Journal of Mechanical and Production Engineering Research and Developments,,Vol 8, No.3, pp.1159-1166, 2018 |
96 | 2018 | J. Mahashar Ali, H. Siddhi Jailani | J. Mahashar Ali, H. Siddhi Jailani, “Surface Roughness Evaluation of Milled Surfaces by Image processing of speckle and white light images”, Springer Nature Singapore Pte Ltd 2019, doi.org/10.1007/978-981-13-1724-8_14 |
97 | 2018 | J. Mahashar Ali, H. Siddhi Jailani | J. Mahashar Ali,H. Siddhi Jailani,” Vision based system for surface roughness characterisation of milled surfaces using speckle line images”, IOP Publishing, doi:10.1008/1757-899X/402/1/012054 |
98 | 2018 | P.D. Jeyakumar, M. Thirumurugan | P.D. Jeyakumar, M. Thirumurugan,” Experimental Field Performance Analysis of Small Weed Remover in Sugarcane Grassland”, SAE International, July 18, 2018 |
99 | 2018 | P D Jeyakumar | P D Jeyakumar, “Estimation and validation of interfacial heat transfer coefficient during solidification of spherical shaped aluminum alloy(AL601) casting using inverse control volume technique “ Frontiers in Heat and Mass Transfer (FHMT), Vol. 21, No.12 ,DOI: 10.5098/hmt.12.21, 2019 |
100 | 2018 | M. Abdur Rahman N. Sirajudeen | M. Abdur Rahman N. Sirajudeen, “Influence of aging, varying particle size & volume fraction of Al2O3 particles on the hardness and wear behavior of Al 7150 alloy composite produced by hot uniaxial compaction method” Materials research express, 2018 |
101 | 2018 | K. Sathickbasha, A.S. Selvakumar, M.A. Sai Balaji, B. Surya Rajan | K. Sathickbasha, A.S. Selvakumar, M.A. Sai Balaji, B. Surya Rajan, “The dual of metal sulfides as lubricant and abrasive: An interface study in friction composite” Material Research Express, https://doi.org/10.1088/2053-1591/aatdf5a007/978-981-13-6887-5 -12 |
102 | 2018 | M.A.Sai Balaji | M.A.Sai Balaji, “Monitoring of drill runout using Least Square Support Vector Machine classifier” , Measurement, Elsevier, doi:10.1016/j.measurement.2019.05.102 |
103 | 2018 | M.A.Sai Balaji | M.A.Sai Balaji,” Prediction and Geometric Adaptive control of surface roughness in driling process”, FME Transactions, Vol.47, pp. 424-429. doi: 10.5937/fmet1903424S |
104 | 2018 | B. Surya Rajan, K. Sathickbasha,M.A. Sai Balaji | B. Surya Rajan, K. Sathickbasha,M.A. Sai Balaji, “Development of an Automated and Dedicated measuring system of tube dimensions using 1d and 2d laser Displacement Sensors”, FME Transactions, Vol.47, issue 1, 2018 doi:10.5937/fmet1901122R |
105 | 2019 | B.Surya Rajan, MA.Saibalaji M.A, S.Rasool Mohideen | B.Surya Rajan, MA.Saibalaji M.A, S.Rasool Mohideen “Tribological Performance and Evaluation of Epoxy modified Phenolic Friction Composite Reinforced with Chemically Modified Prosopis Juliflora Fiber”, Material Research Express, Vol.6, No.7, 2019 doi: 10.1088/2053-1591/ab07e6. |
106 | 2019 | B. Surya Rajan, M A.Saibalaji, S.Prince Arockia Doss | B. Surya Rajan, M A.Saibalaji, S.Prince Arockia Doss,” “Tribological performance evaluation of newly synthesized silane treated shell powders in friction composites” Material Research Express, Vol.6, No.6, 2019 |
107 | 2019 | B. Surya Rajan, MA.Saibalaji | B. Surya Rajan, MA.Saibalaji “Effect of Silane surface treatment on the Physico-mechanical properties of shell powder reinforced Epoxy modified Phenolic Friction composite”, Material Research Express, https://doi.org/10.1088/2053-1591/ab0ca5 |
108 | 2019 | B. Surya Rajan, MA.Saibalaji | B. Surya Rajan, M. A.Saibalaji, “Tribological performance of graphene/graphite filled phenolic composites-A comparative study” Composites Communications , doi: 10.1016/j.coco.2019.05.012 |
109 | 2019 | K. Sathickbasha, A.S. Selvakumar, M.A. Sai Balaji, B. Surya Rajan, Md.Javeed Ahmed | K. Sathickbasha, A.S. Selvakumar, M.A. Sai Balaji, B. Surya Rajan, Md.Javeed Ahmed, “Tribo Performance of Brake Friction Composite with Stainless Steel Fiber”, Advances in Materials and Metallurgy, Springer, Singapore, doi: 10.1007/978-981-13-1780-4_17 |
110 | 2019 | A. Muthu manokar | A. Muthu Manokar “Effect of water depth on a novel abosorber plate of pyramid solar still coated with TiO2 nano black paint” Journal of Cleaner Production, https://doi.org/10.1016/j.jcleprra-2018.12.185 |
111 | 2019 | A. Muthu manokar | A. Muthu Manokar “Experimental investigation on pyramid solar still in passive and active mode” Heat and Mass Transfer, Volume 55, Issue 4, pp.1045-1058, 2019 |
112 | 2019 | A. Muthu manokar | A. Muthu Manokar, “Experimental Investigation on the effect of MgO and TiO2 nanoparticles in stepped solar still”, International Journal of Energy Research, Vol. 43, Issue 8, pp. 3295-3305, 2019 |
113 | 2019 | A. Muthu manokar | A. Muthu Manokar, “Annual performance analysis of adding different nanofluids in stepped solar still”, Journal of Thermal Analysis and Calorimetry, 2019, doi : https://doi.org/10.1007/s1097 |
114 | 2019 | A. Muthu manokar | A. Muthu Manokar,” Experimental study on conventional solar still integrated with inclined solar still under different water depth”, Heat Transfer-Asian Research, Vol. 48, Issue 5, 2019. |
115 | 2019 | A. Muthu manokar | A. Muthu Manokar,” Experimental investigation on the effect of photovoltaic panel partially and fully submerged in water”, Heat Transfer-Asian Research, Vol. 48, Issue 5, 2019. |
116 | 2019 | A. Muthu manokar | A. Muthu Manokar, “Performance analysis of spiral and serpentine tube solar collector with carbon nanotube nanofluids under natural flow method”, Heat Transfer-Asian Research, https://doi.org/10.1002/htj.21502 |
117 | 2019 | A. Muthu manokar | A. Muthu Manokar, “Effect of Insulation on Energy and Exergy effectiveness of a solar photovoltaic panel incorporated inclined solar still – an experimental investigation” Springer Nature Singapore Ptd Ltd. 2019 |
118 | 2019 | A. Muthu manokar | A. Muthu Manokar,” Interlaminar Fracture Behaviour of Hybrid Laminates Stacked with Carbon/Kevlar Fibre as Outer Layers and glass fibre as core” Springer Nature Singapore Ptd Ltd. 2019 |
119 | 2019 | A. Muthu manokar | A. Muthu Manokar,” A review on different design modifications employed in inclied solar still for enhancing the productivity”, Journal of Solar Energy Engineering, Vol. 141, Issue 3, 2019. |
120 | 2019 | A. Muthu manokar | A. Muthu Manokar, “Enhancement of potable water production from an inclined photovoltaic panel absorber solar still by integrating with flat-plate collector”, Environment, Development and Sustainability, pp.1-23, 2019 |
121 | 2019 | V. Muralidharan | V. Muralidharan, “Fault diagnosis of self-aligning troughing rollers in belt conveyor system using k-star algorithm”, Measurement, Volume 133, Pp: 341-349 |
122 | 2019 | Serajul Haque, M. Abdur Rahman N. Sirajudeen | Serajul Haque, M. Abdur Rahman N. Sirajudeen, “”Effect of manufacturing process parameters on the wear rate of Al 6061–Cu–SiCp alloy composites, Investigation of Stir Casting Process Parameters on Wear Rate of Al 6061-Cu-SiCp Metal Matrix Composites.” Emerging Materials Research, https://doi.org/10.1680/jemmr.18.00068 |
123 | 2019 | M. Pervaz Ahmed H. Siddhi Jailani | M. Pervaz Ahmed H. Siddhi Jailani, “Enhancing Wear Resistance of Cryo Treated Cu-Be2 Alloy”, Springer Netherlands, https://doi.org/10.1007/s12633-018-9835-y |
124 | 2019 | V. Gunasegaran | V. Gunasegaran, “Synthesis and Characterization of Coconut Shell Ash”, Journal of Nanoscience and Nano technolgy, Volume 19, Number 7, July 2019, pp. 4123-4128(6) |
125 | 2019 | M. Abdur Rahman N. Sirajudeen and Serajul Haque | M. Abdur Rahman N. Sirajudeen and Serajul Haque,” “Influence of aging & varying weight fraction of Al2O3 particles on the mechanical behaviour & volumetric wear rate of Al 7075 alloy composite produced by liquid metallurgy route” Materials Research Express, Vol.6, Issue 8, 2019 |
126 | 2019 | M. Abdur Rahman N. Sirajudeen | M. Abdur Rahman N. Sirajudeen,” Effect of different heat treatments and varying volume fraction of nano-Al2O3 particles on the hardness and wear resistance of Al 7150 alloy matrix composite synthesized by hot uniaxial compaction technique”, ” Materials Research Express, Vol.6, Issue 8, 2019 |
127 | 2019 | M. Abdur Rahman N. Sirajudeen and Karunanithi R | M. Abdur Rahman N. Sirajudeen and Karunanithi R” “Sinterability and electrochemical behavior of Al2O3 dispersed Al 7150 alloy composite prepared by high energy ball milling” Materials Research Express, Vol.6, Issue 8, 2019 |
128 | 2019 | M. Abdur Rahman N. Sirajudeen and Karunanithi R | M. Abdur Rahman N. Sirajudeen and Karunanithi R “Hardness and dry sliding wear behavior of SiC reinforced Al 7150 alloy composite synthesized under the influence of aging, varying compaction pressures, particle size and volume fraction of ceramic particulates by hot compaction technique” Materials Research Express, Vol.6, Issue 6, 2019 |
129 | 2019 | S. Jeavudeen, H. Siddhi Jailani and M. Murugan | S. Jeavudeen, H. Siddhi Jailani and M. Murugan,” Influence of thermo-electrical property of materials on Powder Mixed Electrical Discharge Machining”, FME Transactions, Vo.47, Issue 3, pp. 518-523 |
National Journals
S.No | Year | Name of the staff | Publications |
---|---|---|---|
1 | 2009 | RAJARAMAN. R | Rajaraman R. and Velraj R. ‘Numerical estimation of IHTC during solidification of rectangular aluminum alloy casting by control volume technique’, Manufacturing Technology Today , May 2009. |
2 | 2009 | S.SIVAKUMAR | S.Sivakumar, V.Dhanalakshmi, K.Satyanarayanasamy. “Integration of CAD / CAI through feature extracted from step file”, Manufacturing Technology Today, Dec-2009, pp-20 to27. |
3 | 2009 | RAJENDRAN R | S.Rasool Mohideen, K.Angamuthu, G.Thanigaiyarasu, R.Rajendran, Investigation on the Toughness of Steel Weldments Subjected to Deep Cryogenic Treatment Using Notch Tensile Specimen, Manufacturing Technology Today (National) July 2009.p13-20 |
4 | 2009 | PERIASAMY V M | Polyanaline as a corrosion inhibitor for Commercial Aluminium in alkaline solutions, A.Elango , Umadevi , M.Paramasivam, V.M.Perisamy, Journal Of Mettalurgy and Material science , vol-51, Issue -2, PP 97-104, 2009 |
5 | 2010 | SELVAKUMAR.A.S | Selvakumar.A.S, “Evaluation of Tube formability using hydroforming technique. Manufacturing technology today, May 2010. |
6 | 2015 | H.SiddhiJailani | H.SiddhiJailani, A.Rajadurai, B.Mohan, T.Sornakumar, “Eavaluation of drilled hole quality of Al-Si alloy / fly ash composites produced by powder metallurgical technique”, Indian Journal of Engineering and Materials Sciences, Vol.22, pp.414-420, Aug 2015. |
7 | 2016 | V. Muralidharan | V.Muralidharan, V.Sugumaran ,’ A Comparative Study between Support Vector Machine (SVM) and Extreme Learning Machine (ELM) for Fault Detection in Pumps’, Indian Journal of Science and Technology, Vol 9, Issue 49, pp. 1-8, 2016. |
International conferences (2022)
1. | S. Ravikumar, Syed shaul hameed, V Muralidharan, D Pradeep Kumar “Real-Time Condition Monitoring of Multi-Component High Torque Helical Gearbox in Coal Handling Belt Conveyor System Using Machine Learning–A Statistical Approach” SAE Technical Paper Tamilnadu 2022 |
2. | D. Lakshmi, S.Jeyalakshmi, R. Zahira, P. Siva, Abdur Rahman M, Abd Elnaby Kabeel “Gui Based Plant Disease Identification In Farms” 4th International Conference on Engineering Science and Technology (ICEST 2022) Luxor, Egypt, 2022 |
3. | Abdur Rahman, Serajul Haque, Abd Elnaby Kabeel, Muthu Manokar Athikesavan, Mohamed Bak Kamaludeen “Current Advances And Challenges Of Environmentally Friendly Green Composites – A Review” 4th International Conference on Engineering Science and Technology (ICEST 2022) Luxor, Egypt, 2022 |
4. | Abdur Rahman, SerajulHaque, Abd Elnaby Kabeel, Mohamed Bak Kamaludeen, Rajesh Gopal “Effect Of Fabrication Parameters On The Mechanical, Wear, And Corrosion Behavior Of Hybrid Metal Matrix Composites, Recycling Of Mmc – A Review” he 4th International Conference on Engineering Science and Technology (ICEST 2022) Luxor, Egypt, 2022 |
5. | Muthu Manokar, Ravishankar Sathyamurthy, A.E. Kabeel Experimental “Investigation Of Inclined Solar Still With And Without Sand As Energy Storage Materials”, 1st Delta University, International Engineering Conference on Research and Innovation Cairo, Egypt, 26 & 27 Nov, 2022. |
6. | Wesley Jeevadason Aruldoss, Abd Elnaby Kabeel, A Muthu Manokar, Sivaranjani Rajamanickam, Kalaiselvi Karmegam, Padmini Sankaramurthy “Performance analysis of a hybrid twin wedge solar still integrated with BIPV driven thermoelectric modules”, 1st Delta University, International Engineering Conference on Research and Innovation Cairo, Egypt 26 & 27 Nov, 2022. |
7. | Gurukarthik Babu Balachandran*, Sivabalan Avudaiappan, Muthu Eshwaran Ramachandran, Santhiya Ravindran, Prince Winston David, A. Muthu manokar, Abd Elnaby Kabeel “Assortment of influencing parameters for bifacial solar photo voltaic module with ecofriendly reflective material using Placket Burman approach”, 1st Delta University, International Engineering Conference on Research and Innovation Cairo, Egypt, 26 & 27 Nov, 2022. |
8. | Suriya kala, Kavitha, Prince Winston, Gurukarthik Babu, A. Muthu manokar, Abd Elnaby Kabeel, “Modelling of Performance Indicators in Bifacial Solar Photovoltaic Module with Aluminium Foil-based Waste Reflective Material”, 1st Delta University, International Engineering Conference on Research and Innovation Cairo, Egypt, 26 & 27 Nov, 2022. |
9. | Gurukarthik Babu Balachandran, Benjamin Deva Sakayam Samraj, Sankarasathasivam Muthukrishnan, Dhanabal Arumugam, Prince Winston David, A. Muthu manokar , Abd Elnaby Kabeel “Experimental Investigation Of Building Integrated Solar Photovoltaic Array With Different Interconnection Patterns”, 1st Delta University International Engineering Conference on Research and Innovation Cairo, Egypt 26 & 27 Nov, 2022. |
10. | P.Aravind, S.Ramesh Prabhu, P.Pandimuni, D.Prince Winston, A.Muthu Manokar, A.E Kabeel “Neural Network Based Fault Identification Technique for Solar PV System”, 1st Delta University, International Engineering Conference on Research and Innovation Cairo, Egypt 26 & 27 Nov, 2022. |
11. | Hariharasudhan, Prince Winston, Pravin, Gurukarthik Babu, A. Muthu manokar, Abd Elnaby Kabeel, “Optimization of influencing parameters of the solar photovoltaic module using Taguchi method”, 1st Delta University, International Engineering Conference on Research and Innovation Cairo, Egypt, 26 & 27 Nov, 2022. |
12. | J.Kamalakannan, A.E. Kabeel, A. Muthu Manokar, Performance, “Combustion, and Emission studies of higher blends Deccan Hemp Oil methyl ester in a Single cylinder Diesel engine”, 1st Delta University, International Engineering Conference on Research and Innovation Cairo, Egypt 26 & 27 Nov, 2022. |
13. | M.Sangeetha, D.Lakshmi, R. Zahira, R. K. Padmashini, A. Kabeel, A. Muthu Manokar “Design and Development of Voice Controlled solar-powered electric bicycle with Location Tracking”, 1st Delta University, International Engineering Conference on Research and Innovation Cairo, Egypt 26 & 27 Nov, 2022. |
14. | K Sathickbasha, P Hariharasakthisudhan, Sivakumar Chandramohan, KJ Nagarajan, FRANCESCO COTILLI, P Balaji, “Tribo performance of Sb2O3 with pre-blend metal sulfide in brake friction composites”, ADMMS 2022, SAE Technical Papers Chennai, TamilNadu 25&26 Nov,2022 |
15. | Arockia Julias, Ram Kumar, P D Jeyakumar, Geethu Mani, S. Rasool Mohideen “Low Velocity Impact Strength of Cryogenic Treated Glass-Carbon Fiber Reinforced Composite Panels” ADMMS 2022, SAE Technical Papers Chennai, TamilNadu 25 & 26 Nov,2022 |
16. | L Annagowsalya, P D Jeyakumar, A. Arockia Julias “Experimental Analysis On Development Of Algae Based Catalytic Convertor For Ecofriendly Environment”, ADMMS 2022, SAE Technical Papers Chennai, TamilNadu 25 & 26 Nov,2022 |
17. | Shaul Hameed Syed, Muralidharan V, Pradeep Kumar D, and Ravikumar S, “Effect of k-Nearest Neighbours (k-NN) in Classifying Planetary Gearbox Faults Using Statistical Features” ADMMS 2022, SAE Technical Papers Chennai, TamilNadu 25 & 26 Nov,2022 |
18. | Pradeep Kumar, V Muralidharan, Shaul Syed, “Fault Classification of Face Milling Tool Using Vibration Signals and Histogram Features–A Machine Learning Approach” ADMMS 2022, SAE Technical Papers Chennai, TamilNadu 25 & 26 Nov,2022 |
19. | Sairam Jana and Jeavudeen S, “The Role of Various Dielectrics Used in EDM Process and Their Environmental, Health, and Safety Issues”, International Conference on Applications in Computational Engineering &Sciences (ICONACES 2022) VIT Chennai 21st & 22nd October 2022 |
International conferences (2020)
S.No. | Name of Faculty | Publication |
---|---|---|
1 | Muralidharan V | Gunasegaran, V, Muralidharan, V, “Fault Diagnosis of Spur Gear System through Decision Tree Algorithm using vibration signal”, Elsevier, Science Direct Materials Today Proceedings, ICMMM 2019, 22 (2020) 3232-3239. |
2 | Varun Kumar A, Selvakumar A. S., Ravikumar, N | Varun Kumar Arulvizhi, Selvakumar Al. S., Ravikumar, N, Dinesh, B and Abdur Rahman K, “Free vibration study of Nd:YAG Laser Welded Stainless steel 316 joints reinforced with Stellite Powder”, Elsevier, Science Direct ICMMM 2019, 22 (2020) 1369-1373. |
3 | Varun Kumar A, Balasrinivasan, M, Sivakumar,C | Varun Kumar A, Balasrinivasan, M, Varun Kumar, R, Balachandar, K, Sivakumar,C, “Temperature Distribution Study of Friction Stir Welded Aluminum Alloy 7075-T6 joints Reinforced with SiC Powders”, Elsevier, Science Direct, Materials Direct, 22(2020) 1333-1340. |
4 | Muthu Manokar A | Muthu Manokar, A, Kabeel A.E., RavishankarSathyamurthy, Mageshbabu D, Madhu B, Anand P, ParandhamanBalakrishnan, “Effect of mass flow rate on fresh water improvement from inclined PV panel basin solar still”, Elsevier Materials Today, February 2020. |
5 | Mohamed Bak K | Mohamed Bak, K, Raj Kumar, G, Ramasamy N and Vijayanandh, R, “Experimental and Numerical studies on the mechanical characterization of EPDM / S-SBR Nano clay composites”, Materials Science and Engineering, IOP Publishing,912 (2020) 052016. |
6 | Mohamed Bak K | Mohamed Bak, K, “Mechanical Investigation of coconut coir reinforced epoxy composite spur gear”, ICSTEE 2020, ICSTEE20-ME-19. |
7 | Muthu Manokar A | RavishankarSathyamurthy, Mageshbabu, D, Madhu, B, Muthu Manokar, A, Reajendra Prasad, A, Sudhakar, M, “Influence of fins on the absorber plate of tubular solar still – An experimental study”, Elsevier, Materials Today : Proceedings, 2214-7859/2020. |
8 | Md. Javeed Ahmed | Stephen Bernard, S, Suresh, G, Md, Javeed Ahmed, Mageshwaran, G, Madanagopal V, “Performance analysis of MWCNT fluid parabolic trough collector for whole year”, Elsevier, Materials Today: Proceedings, 2214-7853/2020. |
International conferences (2009-2019)
S.No | Year | Name of the staff | Publications |
---|---|---|---|
1 | 2009 | R. RAJENDRAN | “Surface Modification of EN 8 Steel by Aluminizing and Nitriding for Automotive Applications” 09M-0018/2009-01-0604 – SAE 2009 world congress at Detroit USA April 20-23, 2009 |
2 | 2009 | S.SIVA KUMAR | “Comparison of CAD Models and Real Time Images Using STEP Files for Computer Aided Inspection” – 2nd International Conference on Recent Advances in Material Processing Technology (RAMPT’09), , National Engineering College, Kovilpatti, Feb- 25 to 27 – 2009. |
3 | 2009 | RASOOL MOHIDEEN. S | S. Rasool Mohideen, Ahmad Mujahid Ahmad Zaidi, “Investigation on Fracture Behaviour of Low Alloy Steel Weldments Subjected to Controlled Cryogenic Treatment”, AES- ATEMA 2009 Conference ,Hamburg, Germany , September 2009. |
4 | 2009 | RASOOL MOHIDEEN. S | S. Rasool Mohideen and Nor Azalli Bin Azmir, “ Metallographic Examination Of Cryogenically Treated Steel Weldments”, Malaysian Metallurgical Conference December 2009. |
5 | 2009 | KASIMAYAN. T | T. Kasimayan, and K. Ramesh “Finite Element Simulation of Whole Field Photoelastic Parameters for the Slice Cut from 3D Models”, Intl. Congress on Computational Mechanics and Simulation (ICCMS 09), IIT Bombay, 1st – 3rd December 2009. |
6 | 2009 | KASIMAYAN. T | T. Kasimayan, and K. Ramesh, “Digital Photoelastic Analysis of Stress Frozen Slices using Five-step Method”, 4th Intl. Conference on Experimental Mechanics (ICEM 2009), Singapore, 18th – 20th November 2009.SPIE Proceedings Vol:7522, DOI: 10.1117/12.851707 |
7 | 2009 | KASIMAYAN. T | T. Kasimayan, and K. Ramesh, “Whole Field PhotoelasticParametersEstimation using Five-step Method”, 7th EUROMECH Solid Mechanics Conference (ESMC 2009), Portugal, 7th – 11th September 2009 |
8 | 2010 | RASOOL MOHIDEEN. S | Rasool Mohideen. S , MohdShukriMohdAripin, S.Thamizhmanii, Sulaiman Bin Hasan and Dan Sathiaraj, “Deep Cryogenic Treatment on Aluminum Silicon Carbide (Al-SiC) Composite”, International Conference on Manufacturing Science and Technology, Kuala Lumpur, Malaysia, December, 2010 |
9 | 2011 | R.RAJENDRAN & T.VENKATESAN | Elanchesian Effect of Coating Time on the Performance of Electroless Nickel Coated Steel, SAE Paper no: 2011-01-0057, SAE World Congress, Detroit, U.S., Apr 2011. |
10 | 2012 | R.RAJENDRAN | R.RAJENDRAN, “Material Science through Activity based learning,4th International Materials Education Symposia”, UK , Apr 2012 |
11 | 2012 | A. AROKIA JULIAS. | A.Arokiajulias, Velamurali, Sufean A.M “Experimental study on delaminated buckling of symmetric hybrid laminated composite plates”, International Conference on Mechanical and Industrial Engineering, Hotel park plaza, Goa on 8thapril 2012 |
12 | 2012 | P.D.JEYKUMAR | P. D. Jeyakumar,G. Devaradjane, “ Improvement of the bus body structure for frontal accidents “, ASME International congress and exposition, Nov- 9-15, 2012, Austin Texas, USA |
13 | 2012 | M.MURUGAN, BHASKARAN, J | Bhaskaran, J. and Murugan, M. “Online process monitoring of hard turning using statistical parameters of acoustic emission signal” accepted for presentation in International conference Encon 2012 to be held at Sarawak, Malaysia , July 2012 |
14 | 2012 | SATHISH KUMAR R, SURESH KUMAR K, | Sathishkumar R, Suresh kumar K, Velraj R. “Performance of exhaust ebruarycharachteristics of an unmodified CI engine fuelled with Biodiesel – Diesel-Methanol blends”, Annual international conference on Sustainable energy and environment sciences (SEES 2012), 13- 14thebruary 2012, Singapore. |
15 | 2012 | R. RAJENDRAN, AND T. VENKATESAN | T. Antony MuthuBalan, R. Rajendran, and T. Venkatesan, “Wear Improvement of Austenitic Stainless Steel by Gas Nitriding”, EnCon2012 , Malaysia,Jul-2012. |
16 | 2012 | M.MURUGAN, T. JEYAPOOVAN | T. Jeyapoovan, Murugan. M,”Statistical analysis of surface roughness measurements using laser speckle images”, IEEE Conference : Information and Communication Technologies (WICT), 2012 World Congress,Oct. 30 2012-Nov. 2 2012,Page(s): 378 – 382 |
17 | 2012 | A.VARUN KUMAR | A.Varunkumar, K.Balachander, “Microstructural Evolution of Friction Stir Welded Alumnium Alloy 6063 –O””, 2012. |
18 | 2013 | RAJ RAJENDRAN | How to prepare the engineering students for the 21st century, 5th International Materials Education Symposia, UK, April 2013 |
19 | 2013 | RAJ RAJENDRAN, REVATHI VISWANATHAN | Raj Rajendran, RevathiViswanathan, “TEACHING MATERIAL SCIENCE AND ENGINEERING COMMUNICATION: An Integrated Teaching, Writing and Communication Program”, 5th International Materials Education Symposia, ,UK, April- 2013. |
20 | 2013 | S.RASOOL MOHAIDEEN, HYDER NASREEN | S.RasoolMohaideen, HyderNasreen, Jefrey, “ Effect of Cryogenics treatment on Titanium alloys”, International Conference on Engineering Materials and processes. ICEMAP-2013, 23rd&24th May 2013, Pg-125. |
21 | 2013 | RAJ RAJENDRAN | V.I. Semenov,L.Sh. Shuster, J. Huang,Ch. Lin, R. Rajendran, ESTIMATION OF TRIBOLOGICAL PROPERTIES OF LOW AND MEDIUM-CARBON STEELS AFTER HEAT TREATMENT AND SEVERE PLASTIC DEFORMATION,10th International Conference Machines, Technologies. Materials in Bulgaria International Vurtual Journal Machines, Technologies, Materials Year VII Issue 10/2013 ISSN 131300226, Sep 18-20, 2013 |
22 | 2013 | A.ArokiaJulias | Ramya Suresh, Velamurali, A.ArokiaJulias, Ëxperimental Investigation of flexural Strength of glass / carbon hybrid composite laminates”, International Conference on sustainable manufacturing, ICSM 2013. |
23 | 2013 | A.ArokiaJulias | N.Ramkumar, Velamurali, A.ArokiaJulias,S.Rasool Mohideen, Ëxperimental Investigation of Mode torughness of low temperature treated glass / carbon carbon hybrid composite laminates”, International Conference on sustainable manufacturing, ICSM 2013 |
24 | 2014 | R. Rajendran | V.I. Semenov, L.Sh. Shuster, S.-J. Huang, P.-Ch. Lin, R. Rajendran, “Commercially pure copper and low-alloyed chrome bronze in tribological contact with graphitiferous material”, Machines, Technolоgies, Materials, Iss. 9, 2014, pp. 36-39, Bulgeria |
25 | 2014 | R.Rajendran | J Purushothaman, Shaju K Albert, R Ramaseshan and R Rajendran,” Investigation of Al-Si alloy coating on RAFM steel substrate by hot dip aluminizing methods”, International Symposium for research Scholars on Metallurgy, Materials Science and Engineering, IIT Madras, Dec 11, 2014. |
26 | 2014 | M. Pervaz Ahmed, H. Siddhi Jailani and S. Rasool Mohideen | M. Pervaz Ahmed, H. Siddhi Jailani and S. Rasool Mohideen ,” Effect of Cryogenic Treatment on copper Beryllium Alloy”, Advances in Design & Manufacturing, NIT Tiruchirapalli, 5.12.2014 |
27 | 2014 | V.Muralidharan | S.Ravikumar, V.Muralidharan, H.Kanagasabapathy,” Fault diagnosis of self aligning carrying idler (SAI) in Belt-Conveyor system using statistical features and Support Vector Machine, ICCIAMR 2014, Vol 2, ISBN – 978-81-924031-7-5 |
28 | 2015 | R.Rajendran, G.Ramanjaneyalu, T R Tamilarasan | R.Rajendran, G.Ramanjaneyalu, T R Tamilarasan, Vladimir I Semenov, “Cryogenic Treatment of SG Iron for Disk Brake Application”, SAE International,April 2015. |
29 | 2015 | R. Rajendran | V.I. Semenov, L.Sh. Shuster, S.-J. Huang, R. Rajendran, S.V. Chertovskikh, V.G. Shibakov Comparative evaluation of tribological properties of low and medium carbon steels after heat treatment and severe plastic deformation // Book of Abstracts of the 5th Int. Symp. “Bulk Nanostructured Materials: from fundamentals to innovations” (BNM-2015), USATU, August 26 -28, 2015, Ufa, pp. 25-26 |
30 | 2016 | H.SiddhiJailani | C.K. Aravindapandian, K. Koppiahraj, H.SiddhiJailani, “Investigation and development of polymer composite incorporated natural fabrics – Jute and Linen”, International conference on Advancements in Polymeric Materials, Feb 2016. |
31 | 2016 | Pervaz Ahmed Mouda, H.SiddhiJailani | Pervaz Ahmed Mouda , Abdul Azeez, Siddhi JailaniHydershah, “Sliding wear behavior of cryogenic treated copper beryllium alloy”, International Conference on Mechanical Engineering Design , Apl 2016. |
32 | 2016 | V. Muralidharan | Ravikumar S,Mr.S.Giftlin, Dr. H..Kanagasabapathy and V. Muralidharan, “Vibration based fault detection and condition monitoring using Decision Tree Algorithm for Training carrying Idlers (TCI) in Belt- Conveyor System” International Conference on Mechanical Engineering Design, April 2016. |
33 | 2016 | V. Muralidharan | K.Radhakrishnan and V.Muralidharan, “Optimization Of Weld Parameters And Weld Bead Dimensions In Welding Of 0.3%C-Cr-Mo-V Steel By GTAW Process”, International Conference on Mechanical Engineering Design , Apl 2016. |
34 | 2016 | Rasool Mohideen | SThamizhmanii, Rasool Mohideen, Sulaiman, ‘Vertical Multi Roller Burnishing on Copper and Aluminum Metal’ Proceedings of the World Congress on Engineering 2016, Vol 2, 2016 |
35 | 2017 | Surya Rajan B, Selvakumar A S, and Saibalaji M A | Surya Rajan B, Selvakumar A S, and Saibalaji M A, “Strain Analysis of AA6063 Aluminium Alloy By Tube Hydroforming Process in the proceedings of International Conference on Engineering Materials”, Metallurgy And Manufacturing, Feb 2018. |
36 | 2017 | Sathickbasha K, Selvakumar A S, Saibalaji M A and Javeed Ahmed Md | Sathickbasha K, Selvakumar A S, Saibalaji M A and Javeed Ahmed Md, “Tribo performance of brake friction composite with stainless steel fiber” in the proceedings of International Conference on Engineering Materials, Metallurgy And Manufacturing, Feb 2018. |
37 | 2017 | Sai Balaji, Javed Ahmed and Suryarajan Balachandran | Sai Balaji, Sai Priya, Javed Ahmed and Suryarajan Balachandran, “Correlation of test bench With Actual Vehicle Condition of Indian Commercial Passenger Cars” in the proceedings of International Conference on Advances in Industrial Engineering Applications (ICAIEA 2018), Jan 2018. |
38 | 2017 | J. Mahashar Ali, H. Siddhi Jailani and M. Murugan | J. Mahashar Ali, H. Siddhi Jailani and M. Murugan, “Surface Roughness Evaluation of Milled Surfaces by Image Processing of Speckle and White Light Images” in the proceedings of International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), February 2018 |
39 | 2017 | J. Mahashar Ali, H. Siddhi Jailani and M. Murugan | S. I. Mohamed Suhail , J. Mahashar Ali , H. Siddhi Jailani and M. Murugan, “Vision based system for Surface Roughness Characterization of milled surfaces using Speckle Line images” in the proceedings of 2nd International Conference on Advances in Mechanical Engineering,(ICAME-2018) March 2018 |
40 | 2017 | V. Muralidharan | S. Ravikumar, H. Kanagasabapathy and V. Muralidharan, “Fault Diagnosis of Selft Aligning Troughing Rollers (SATR) in Bulk Material Handling Belt Conveyor System by K-star Machine Learning Algorithm”, in the Proceedings of the International Conference on Recent Innovations in Production Engineering (RIPE 2017),March 2017. |
41 | 2017 | H. Siddhi Jailani | D. Maniraj, C. K. Arvinda Pandian H and Siddhi Jailani, “Development öf Natural Fibres Reinforced Polymer Hybrid Composites”in the proceedings of International Conference on Automobile, Marine and Mechanical Engineering |
42 | 2018 | Varun Kumar A, M Balasrinivasan | Mohamed Dulkiflee M, Varun Kumar A, M Balasrinivasan, K. Balachandar, C Sivakumar, “Influence of SiC Powders on Aluminium Alloy 7075-T6 Joints by Friction Stir Welding Process”, 3rd International Conference on Advances in Materials and Manufacturing Applications, December 2018 |
43 | 2018 | K.Sarankumar | K.Sarankumar, Rizwan Asif, Nekuri Vineet, “Design and Modeling of an underwater Bio-Mimicry Snake Robot for Ocean Exploration”, 2nd Internationational Conference on Advancements in Automation, Robotics and Sensing,December 2018 |
44 | 2018 | K.Sarankumar | K.Sarankumar, Somesh S, “Design and Control of Continuum Robotic Arm Using Electromagnets”, 2nd Internationational Conference on Advancements in Automation, Robotics and Sensing,December 2018 |
45 | 2018 | K.Sarankumar | K.Sarankumar, Aakash Ram, Akash S, Aadhishesha, “Design of an Underwater Bio-Mimicry String ray Robot using Electroactive Polymers”, 2nd Internationational Conference on Advancements in Automation, Robotics and Sensing,December 2018 |
46 | 2018 | K.Sarankumar | K.Sarankumar, Jazeel Ahamed, Kavin V, Mohamed Mohaideen SM, Haris Abdullah, Somesh S “Design and Control of a Robot that imitates a Traditional Puppet using Electromagnets and Rotary Actuators”, 2nd Internationational Conference on Advancements in Automation, Robotics and Sensing,December 2018 |
47 | 2019 | B.Surya Rajan, K.Sathickbasha, Saibalaji M.A , S.Rasool Mohideen , A.S.Selvakumar | B.Surya Rajan, K.Sathickbasha, Saibalaji M.A , S.Rasool Mohideen , A.S.Selvakumar ,” Tribo peformance of single and multiwall carbon nano tube in the brake pad formulation”, Eurobrake 2019, Dresden, Germany,ISBN978-0-9572076-3-9 |
48 | 2019 | A. Muthu manokar | A. Muthu manokar, “Effect of cover thickenss on the yield of a solar distiller under the EI oued climate,”, International Symposium on Technology and Sustainable Industry Development, Algeria,2019 |
49 | 2019 | A. Muthu manokar | A. Muthu manokar, “Experimental Evaluation of Indirect Solar Cooking Unit Integrated with Thermal System,”, International Symposium on Technology and Sustainable Industry Development, Algeria,2019 |
50 | 2019 | A. Muthu manokar | A. Muthu manokar, “Experimental study on effect of different mass flow rate in an inclined solar panel absorber solar still integrated with spiral tube water heater”, WSTA 13th Gulf Water Conference, Kuwait |
51 | 2019 | A. Muthu manokar | A. Muthu manokar “Energy and Exergy Analysis of an inclied solar panel basin solar still summer and winter climate conditions”, 5th International Conference on Scientific Research ISR – 2019, 2019 |
52 | 2019 | A. Muthu manokar | A. Muthu manokar “Experimental Investigation of Passive and Active Inclined Solar Still : Energy and Exergu Study”, 5th International Conference on Scientific Research ISR – 2019, 2019 |
53 | 2019 | A. Muthu manokar | A. Muthu manokar “Energy, Exergu and Economic Analysis of a Conventional Solar Still and Peltier Module Integrated Conventional Solar Still – A Comparative Study”, 5th International Conference on Scientific Research ISR – 2019, 2019 |
54 | 2019 | A. Muthu manokar | A. Muthu manokar “Enhancement of a PV/T integrated single slope solar still productivity by using water film cooling over glass cover and hybrid natural fibre composite insulation”, 5th International Conference on Scientific Research ISR – 2019, 2019 |
55 | 2019 | A. Muthu manokar | A. Muthu manokar “Experimental analysis on the performance of passive solar still by using thermally insulating Nano-blended Unsaturated Polyester Composite”, 5th International Conference on Scientific Research ISR – 2019, 2019 |
56 | 2019 | A. Muthu manokar | A. Muthu manokar “CFD studies on Multy Cavity solar Receiver with Two Heat Transfer Fluids”, 5th International Conference on Scientific Research ISR – 2019, 2019 |
57 | 2019 | A. Muthu manokar | A. Muthu manokar “Comparative study of conventional solar still with and without cement coated red bricks”, 5th International Conference on Scientific Research ISR – 2019, 2019 |
58 | 2019 | Rajendran D.R, Mr. A. Muthu Manokar | Rajendran D.R, Mr. A. Muthu Manokar, “Application of solar energy on excess agricultural production”, International Conference on Advancements in Mechanical Engineering (ICAME 2019) |
59 | 2019 | Rajendran D.R, Mr. A. Muthu Manokar | Rajendran D.R, Mr. A. Muthu Manokar, “Studies on the Influencing Parameters in the Design Optimization of Solar Dish Reflector-Cavity Receiver Collector System”, International Conference on Advancements in Mechanical Engineering (ICAME 2019) |
60 | 2019 | Varun Kumar A, M Balasrinivasan, R Varun Kumar, Sivakumar C | Varun Kumar A, M Balasrinivasan, R Varun Kumar, Sivakumar C, “Temperature Distribution Study of Friction Stir Welded Aluminium Alloy 7075-T6 joints Reinforced with SiC Powders”, ICMMM 2019: International Conference |
61 | 2019 | Varun Kumar A, N. Ravikumar & A. S. Selvakumar | Varun Kumar A, N. Ravikumar & A. S. Selvakumar,” Free Vibration Study of Nd-YAG Laser welded Stainless Steel 316 joints Reinforced with Stellite Powder”, ICMMM 2019: International Conference |
62 | 2019 | Mr. V. Gunasegaran, V. Muralidharan | Mr. V. Gunasegaran, V. Muralidharan,” Fault Diagnosis of Spur Gear System through Decision Tree Algorithm Using Vibration Signal”, International conference |
National Conference
S.No | Year | Name of the staff | Publications |
---|---|---|---|
1 | 2009 | K.M.ABUBACKER | AbubackerK.M ,“Finite Element Analysis and Optimization of Impingement Heat Sink Fin”, Proceedings of the Second National Conference on Emerging Trends In Engineering And Technology – SNCETET’ 09 Rajarajeswari Engineering College, 2nd – 3rd, April 2009. |
2 | 2009 | K.M.ABUBACKER | Abubacker K.M , “Computational Fluid Dynamics Analysis of Impingement Heat Sink Fin”, Proceedings of the Second National Conference On Emerging Trends In Engineering And Technology – SNCETET’ 09. Rajarajeswari Engineering College, 2nd – 3rd, April 2009. |
3 | 2009 | JEYAKUMAR P D | Jeyakumar. P.D., “Modelling and Analysis of Rail Coach Under frame”, National Conference of ACDAME’09, 11th April 2009, organized by GKM College of Engineering and Technology. |
4 | 2009 | VENKATESAN T | Venkatesan. T., “Analysis and Optimization of Drive system and Allied Components of Common Rail Endurance Testing Machine”, National Conference of ACDAME’09, organized by GKM College of Engineering and Technology, , 11th April 2009. |
5 | 2009 | S.ZUBAIDA KATHOON BEE | ZubaidaKathoonBee.S, ”Finite Element Simulation of Oblique Metal Cutting”, Proceedings of the Second National Conference On Emerging Trends In Engineering And Technology – SNCETET’ 09. Rajarajeswari Engineering College. 2nd – 3rd, April 2009. |
6 | 2009 | SELVA KUMAR A S | Selva Kumar. A.S., “Numerical Simulation of Tube Formability using Hydro Forming Process”, Proceedings of The Second National Conference On Emerging Trends In Engineering And Technology – SNCETET’ 09 Rajarajeswari Engineering College, 2nd – 3rd, April 2009. |
7 | 2010 | A.AROCKIA JULIAS | AROKIA JULIAS.A”Delamination analysis of fiber reinforced polymer composite laminates” Recent innovations in production Engg. MIT, Chennai, 16th to 17th april 2010 |
8 | 2011 | AROKIA JULIAS.A | “Buckling Analysis of Hybrid Fiber Reinforced Polymer Laminates” Presented paper in the National conference AMS’11 on 1st April 2011at GCT Coimbatore. |
9 | 2011 | AROKIA JULIAS.A | AROKIA JULIAS.A“ Impact test on Hybrid Fiber Reinforced Polymer Laminates “Presented paper in the National conference AMS’11 on 1st April 2011 at GCT Coimbatore. |
10 | 2013 | AROKIA JULIAS.A | M. Rajmohan, A. Arockia Julias, S. Thajudeen, L. Vijayakumar , “Experimental Studies On Delamination Behavior Of Hybrid Composite Laminates.”, Advances in Materials, Design & Manufacturing (AMDM 2013)- Vol- 1, PP-11-15,April 2013 |
11 | 2013 | A.S.Selvakumar | A.S.Selvakumar,S.Venkataswamy, “”Experimental Investigation for the evaluation of Tube Formability using Hydroforming Technique”, Proceedings of national conference on recent advances in Manufacturing and Management 2013. |
12 | 2015 | S.Rajarajan, R.Rajendran | TilakkumarJ.V,S.Rajarajan,R.Rajendran,”Corrosive wear of aluminized steel” |
13 | 2015 | T.Venkadesan, R.Rajendran | P.Madhavan,T.Venkadesan,R.Rajendran,”Fatigue crack propagation analysis on aluminium alloy-6062 using extened finite element modeling. |
14 | 2015 | R.Rajendran, | D.Prithiviraj,R.Rajendran,Venugopal,”Correlation between neutral salt spray(NSS) test and potentiostat dynamic test for corrosion on zinc plated steel |
15 | 2015 | R.Rajaraman | BaskarSubramaniyan,R.Rajaraman “Investication on overall heat transfer coefficient of EG/Cunanofluid in a car radiator”. |
16 | 2015 | S.Jeavudeen, M.Murugan | S.Jeavudeen, M.Murugan and S.Guhanesan, “Enhancement of Machining of Titanium Alloy in the powder mixed EDM process”, National conference on Recent Trends in Efficiency Management in Industries, April 2015 |
17 | 2015 | N.Sirajudeen | O.Sathish and N.Sirajudeen,” Characterization of Friction surfaced low carbon steel by modeling alloy”, National conference on Recent Trends in Mechanical Engineering Design, Manufacturing & Material Science”, April 2015. |
18 | 2015 | N.Ravikumar and R.Rajendran | M.Abdur Rahman, N.Ravikumar and R.Rajendran,” Development of Wear Resistance Brake Pad Material for Air Disc Brake Pad”, National conference on Recent Trends in Efficiency Management in Industries, April 2015 |
19 | 2015 | Loganathan S, R.Rajendran | Santhoshkumar G, Loganathan S, R.Rajendran,” Experimental Analysis of TribologicalBehaviour of Nano CuO dispersed Lubrication on steel”, National conference on Recent Trends in Efficiency Management in Industries, April 2015 |
20 | 2015 | Varun Kumar A, M. Balasrinivasan | Mohammed Dulkiflee, Varun Kumar A, M. Balasrinivasan,” Metallurgical Properties of Aluminium Alloy 7075-T6 by Friction Stir Welding”, National conference on Recent Trends in Efficiency Management in Industries, April 2015 |
21 | 2015 | S.Beer Mohammed | T.Shanawaz and S.Beer Mohammed, “Formation of Ni-Al Intermaetallic Coating on 9Cr 1Mo Steel Substrate”, National conference on Recent Trends in Efficiency Management in Industries, April 2015. |
22 | 2015 | T. Venkatesan | X.Joseph raj, T. Venkatesan, “Fatigue Analysis of PVD coated Mild steel using Rotary Bending Machine”, National conference on Recent Trends in Mechanical Engineering Design, Manufacturing & Material Science, April 2015 |
23 | 2015 | S. Beer Mohammed | R.Vetri and S. Beer Mohammed, “Design and Analysis of composite deck plate for marine structures”, National Conference on Trends and Innovations in Mechanical Engineering,April 2015 |
24 | 2015 | S. Beer Mohammed | T.K. Mohammed Ashik Ali and S. Beer Mohammed, “Design and Analysis of Multi Grade Waste Handling Equipment”, National Conference on Recent Trends in Design and Analyzing, April 2015. |
25 | 2016 | R.Rajendran, N. Ravikumar, | M.Ananthasaravanan, R.Rajendran, N. Ravikumar, K.Venkateshwaran, Experimental Studies on Properties of steel based bi metal material, Heat Treatment and Surfce engineering conference& Expo, Jun 2016 |
26 | 2016 | R.Rajendran, T.R.Tamilarasan, | M.Vignesh, R.Rajendran, T.R.Tamilarasan, A.Venugopal, Sliding wear behavior of nitride cast iron against steel, Heat Treatment and Surfce engineering conference & Expo, Jun 2016 |
27 | 2016 | R.Rajendran, G.Ramanjaneyalu | Dhanalakshmisatishkumar, M.ShahulHameed, R.Rajendran, G.Ramanjaneyalu, K.Shanmugasundaram, Effect of load and sliding velocity on wear and coefficient of friction of Al/SiC and Al / Si3N4 composites , Heat Treatment and Surfce engineering conference & Expo, Jun 2016 |
28 | 2016 | N.Ravikumar, R.Rajendran | P.Ranjith, N.Ravikumar, R.Rajendran, Tribological properties brake friction materials,Heat Treatment and Surfce engineering conference & Expo, jun 2016 |
29 | 2016 | Loganathan S, Rajendran R | Rasheedur Rahaman M G, Loganathan S, Rajendran R, Effect of deep cryogenic treatment on tensile and fatigue behavior of EN19 steel,Heat Treatment and Surfce engineering conference & Expo, june 2016 |
30 | 2016 | N.Ravikumar, R. Rajendran | Tanmoydey, N.Ravikumar, R. Rajendran, Modal Analysis of Disk Brake System, Heat Treatment and Surfce engineering conference & Expo, june 2016 |
31 | 2016 | Beer Mohammed S, Sathyanarayanan D | Darwin S, Beer Mohammed S, Sathyanarayanan D, Micro structural and wear peoperties of Stellite deposition by powder metallurgy process,Heat Treatment and Surfce engineering conference & Expo, june 2016 |
32 | 2019 | S.Mohamed Illyas | S.Mohamed Illyas, “Computational Analysis of Heat Transfer Performance of Jet Impingement Cooling on a Flat Surface”, “National Conference NIT, Warangal” |