| S. No. |
Name of the Ph.D. Scholar |
Title of thesis |
Name of the Supervisor |
Month and Year of award of Ph.D. |
Thesis Link |
| 1 |
Emmanuel Agbo Tei |
Experimental Investigation Of Conventional and Inclined Solar Still With Sensible Heat Storage Materials |
Dr. S. Rasool Mohideen |
|
|
| 2 |
Mr.Mohd Durvesh Mohiudeen |
Fracture Analysis of Wire Arc Additive Manufactured 1.25Cr 0.5 Mo Steel Weldments |
Dr. S. Rasool Mohideen |
Oct-23 |
|
| 3 |
Mr.N.Ravikumar |
Investigations of Tribological Properties of Graphene Reinforced Friction Composites Tested on Modified Grey Cast Iron Disc |
Dr. T.R. Tamilarasan |
Sep-23 |
Thesis Link |
| 4 |
Ms.S.Zeenath Fathima |
Investigations on Microstructures, Mechanical and Corrosion Properties of Al 6101 Closed Cell Aluminium Alloy Foams under Heat and Cryogenic Treatments |
Dr. T.R. Tamilarasan |
July 2023 |
Thesis Link |
| 5 |
Mr. Syed Shaul Hameed |
A Machine Learning Approach To Fault Diagnosis Of Planetary Gearbox |
Dr. V. Muralidharan |
Jun 2023 |
Thesis Link |
| 6 |
Mr.Varun Kumar A |
Enhancement of Material Properties of Similar Stainless Steel Joints by Laser Welding Process |
Dr.A.S. Selvakumar |
April 2023 |
Thesis Link |
| 7 |
Mr. D. Pradeep Kumar |
Fault Diagnosis Of Multi Point Cutter Using Vibration Signals And Machine Learning Algorithms |
Dr. V. Muralidharan |
February 2023 |
Thesis Link |
| 8 |
Mr. S. Karthikeyan |
Experimental Investigations of Microstructure, Mechanical Properties and Electrochemical Behavior of A390 Alloy-based Metal Matrix Composites Material |
Dr. V. Muralidharan |
Nov 2022 |
Thesis Link |
| 9 |
Mr. K. Showkat Ali |
A novel study on synthesis and characterization behaviour of nanocrystalline Ti and Ti-6Al-4V alloys by mechanical alloying and spark plasma sintering Technique |
Dr R. Karunanithi |
October 2022 |
Thesis Link |
| 10 |
Mr.K. Asrar Ahmed |
Evaluation of Tribological Performance of different types of Brass and its varying composition in disc brake pads |
Dr. S Rasool Mohideen |
August 2022 |
Thesis Link |
| 11 |
Mr.A. Karthik |
Experimental investigation of AA2219-CeO2 composite Developed by Squeeze casting technique. |
Dr. R.Karunanithi |
July 2022 |
Thesis Link |
| 12 |
Ms. Mahboob E Afshan |
Experimental investigation on the charging and discharging performance of a thermal storage unit due to stratification affected by aspect ratio and dispersed PCM balls |
Dr. A.S.Selvakumar |
June 2022 |
Thesis Link |
| 13 |
Mr. N. Sirajudeen |
Synthesis and characterization of ceramic particulate reinforced age hardenable Al alloy composite via stir casting route. |
Dr.R.Karunanithi & Dr.Beer Mohamed, S |
May 2022 |
Thesis Link |
| 14 |
Mr. A. Prashanth |
Development of hybrid nano – AL2O3/Y2O3 dispersed AA 7017 by mechanical alloying followed by hot pressing process |
Dr.R.Karunanithi |
Nov 2021 |
Thesis Link |
| 15 |
Ms. Annagowsalya |
Experimental investigation and validation of interfacial heat transfer coefficient during solidification of casting process using inverse method |
Dr. P.D. Jeyakumar |
Sep 2021 |
Thesis Link |
| 16 |
Mr. Md Javeed Ahmed |
Characterization of Natural Fibers and their Influence on Physical Mechanical and Tribological Properties in Non Asbestos Organic Phenolic Friction Composites |
Dr. M. A. Saibalaji |
Aug 2021 |
Thesis Link |
| 17 |
Mr. M. Abdur Rahman |
Effect of Aging and Ceramic Reinforcement on the Hardness and Wear Behavior of A1 7150 Alloy Composite by Powder Metallurgy |
Dr. Karunanithi, R |
Aug 2021 |
Thesis Link |
| 18 |
Mr. K. Sathickbasha |
Effect of Metal Fibers and Metal Sulfides Towrds Tribological Performance in NA Brake Pads |
Dr. A.S. Selvakumar |
July 2021 |
Thesis Link |
| 19 |
Mr. C.K Arvinda Pandian |
Development and Investigation of Properties of Jute Linen Epoxy Composite Laminates |
Dr. H. Siddhi Jailani |
Jan 2021 |
Thesis Link |
| 20 |
Mr. J. Mahashar Ali |
Surface Roughness evaluation of machined surface using image processing |
Dr. H. Siddhi Jailani |
Jan 2021 |
Thesis Link |
| 21 |
Mr. B. Surya Rajan |
Effects on Tribological performance of surface treated natural fiber and natural fillers in friction composites |
Dr. M. A. Saibalaji |
Nov 2020 |
Thesis Link |
| 22 |
Mr. S. Ramalingam |
Dynamic modeling, simulatin and Analysis of single link robotics manipulator with flexibility |
Dr. S. Rasool Mohideen |
Sep 2020 |
Thesis Link |
| 23 |
Mr. S. Jeavudeen |
Investigation of mechanisms and optimization of machining parameters in the novel educator based PMEDM process |
Dr. H. Siddhi Jailani |
Aug 2020 |
Thesis Link |
| 24 |
Mr. M. Pervez Ahmed |
Influence of cryogenic treatment on Cu-2 wt% Be Alloy |
Dr. H. Siddhi Jailani |
Aug 2019 |
Thesis Link |
| 25 |
Mr. J. Purushothaman |
Development of hydrogen permeation barrier on RAFM steel by hot dip aluminizing for fusion reactor application |
Dr. S. Rasool Mohideen |
July 2019 |
Thesis Link |
| 26 |
Mr. S. Baskar |
Theoretical and experimental investigation on cooling air flow path in automotive engine cooling system |
Dr. S. Prince Arockia Doss |
June 2019 |
Thesis Link |
| 27 |
Mr. G. Selvam |
Study and Analysis of Appropriate Spot Distribution among the Welding Stations of Body Shop to Improve Quality and Productivity |
Dr. S. Prince Arockia Doss |
Jan 2019 |
Thesis Link |
| 28 |
Mr. T.R. Tamilarasan |
Effect of Surfactants on The Characteristics of Electroless Composite Coatings |
Dr.R. Rajendran |
May 2016 |
Thesis Link |
| 29 |
Mr. R.Sathish Kumar |
Energy Efficient and Environment Friendly Biodiesel from Manilkara Zapota Seed Oil as A Sustaibable Fuel for Diesel Engines |
Dr.K. Sureshkumar |
Oct 2015 |
Thesis Link |
| 30 |
Mr. T. Jeyapoovan |
characterization of machined surfaces using machine vision |
Dr. M. Murugan |
Nov 2013 |
|
| 31 |
Mr. J. Bhaskaran |
Process monitoring of hard turning using Acoustic emission Technique |
Dr. M. Murugan |
Aug 2012 |
Thesis Link |
| 32 |
Mr. N Muthu Krishnan |
Machinability studies and Artificial Neural Network Modeling of Turning Al-Sic (10p) Metal Matrix Composites |
Dr. M. Murugan (Joint- Supervisor) |
Jul 2010 |
|
