- Admissions Help Desk
DEPARTMENT OF MECHANICAL ENGINEERING
Mechanical
Dr. S. Mohamed Illyas
Designation | : | Associate Professor |
Nature of Employment | : | Regular |
Date of Joining | : | 13-06-2011 |
Qualification | : | B.E, M.E, Ph.D |
Phone | : | +91 44 2275 1347,48,50 (Office) |
Email ID | : | illyas@crescent.education |
Teaching
Educational Background
Degree | Discipline | Year of Passing | University |
---|---|---|---|
Ph.D | Heat Transfer | 2020 | Jawaharlal Nehru Technological University (JNTU), Andhra Pradesh |
M.E | Thermal Engineering | 2002 | Madurai Kamaraj University |
B. E | Mechanical Engineering | 2000 | Madurai Kamaraj University |
Work Experience
Designation | Institution | Duration |
---|---|---|
Associate Professor | B.S. Abdur Rahman Crescent Institute of Science and Technology | August 2023 – Till date |
Assistant Professor (Senior Grade) | June 2011 – July 2023 | |
Senior Lecturer | Jeppiaar Engineering College, Chennai | August 2008 – May 2011 |
Lecturer | GKM College of Engineering and Technology, Chennai. | June 2002 – May 2008 |
Lecture courses
- Heat and Mass Transfer
- Thermodynamics
- Thermal Engineering
- Design of Thermal system
- Fluid Mechanics
- Gas Dynamics and Jet Propulsion
- Refrigeration and Air conditioning
- Advanced IC Engines
- Energy Generation and Management
- Renewable Energy sources
Research
Areas of Research Interest
- Convective Heat Transfer Enhancement
- Computational Fluid Dynamics
- Jet Impingement Cooling
Research Publications
- Emmanuel Agbo Tei , Rasool Mohideen Shahul Hameed , Mohamed Illyas , Muthu Manokar Athikesavan, Experimental investigation of inclined solar still with and without sand as energy storage materials, Journal of Energy Storage, Vol. 77 (2), 109809 (2024)
- S. Mohamed Illyas, V. Kumaresan and A. Muthu Manokar, Numerical analysis on heat transfer, flow structure and exergy loss of combined truncated and circular ribs in a square duct, Journal of Thermal Engineering, Vol 9 (6), pp:585-1603 (2023)
- Babu Sasi Kumar Subramanian, Vadivel Eswaran, Mohamed Illyas Shahul Hameed, Muthu Manokar Athikesavan, Performance analysis of radiator- rectangular duct with winglet shapes using glycerol/water mixture -CuO Nanofluids, Iranian Journal of Chemistry and Chemical Engineering, (July 2023)
- Sriram Surya Kirampadi Sankar Anish Murugan Abdur Rahman Mohamed Illyas Rajendran Duraisamy RamalingamFausto Pedro GarciaMarquez Muthu Manokar Athikesavan, Recent advancements in fat plate solar collector using phase change materials and nanofuid: a review, Environmental Science and Pollution Research vol.30, 88366–88386 (2023)
- S. M. Illyas, A. Muthu Manokar and Abd Elnaby Kabeel, Experimental and numerical study of effect of vanes on heat transfer and flow structure of swirling impinging jet – Journal of Applied Fluid Mechanics, Vol. 16 (2), pp. 205-221 (2023)
- S. Mohamed Illyas and Md. Javeed Ahmed and A. Muthu Manokar, Numerical analysis on heat transfer and flow characteristics of swirling vertical impinging jet for electronics cooling – 4th International Conference on Advances in Mechanical Engineering, SRM University, Chennai, (2022)
- S. Mohamed Illyas, B.R. Ramesh Bapu and, V. Venkata Subba Rao, Computational analysis of Heat Transfer Performance of Jet Impingement Cooling on a Flat Surface, National Conference on Computational Modeling of Fluid Dynamics Problems – NIT, Warangal (2019)
- S. Mohamed Illyas, B.R. Ramesh Bapu and, V. Venkata Subba Rao, Experimental Analysis of Heat Transfer and Multi Objective Optimization of Swirling Impinging Jet on a Flat Surface, Journal of Applied Fluid Mechanics, Vol. 12 (3), pp. 803-817, (2019)
- S. Mohamed Illyas, B.R. Ramesh Bapu and, V. Venkata Subba Rao, Heat Transfer and Flow Visualization of Swirling Impinging Jet on Flat Surface using Helicoid Inserts, Journal of Visualization, Vol. 21 (5), pp. 729 -749. (2018)
- S. Mohamed Illyas, B.R. Ramesh Bapu and, V. Venkata Subba Rao, CFD Analysis of Heat Transfer and Fluid Flow Characteristics of Swirl and Non Swirl Impinging Jet for Electronic Cooling Application, International Journal of Dynamics of Fluids. Vol. 7 (2), pp. 203-214. (2011)
- S. Mohamed Illyas, T. Thomas Koil Raj, Optimization of Hydraulic Valve Design using Computational Fluid Dynamics, International Conference on Frontiers in Design and Manufacturing Engineering, Coimbatore, India, February 01-02 (2008)
- S. Mohamed Illyas, Study of heat transfer characteristics of finned tube in latent heat thermal storage system using Computational Fluid Dynamics, International Conference on Emerging Challenges in Design and Manufacturing Technologies, Chennai, India, November 28-30 (2007)
Reviewer for International Journals
- Brazilian Society of Mechanical Sciences and Engineering
- Journal of Thermal Engineering
- Journal of Applied Fluid Mechanics
Seminars / Workshops Attended
- Faculty Development Programme on Exploring Dynamics of National Education Policy 2020 with Reference to NAAC Perspectives, Research Foundation of India, 15-24 November 2023
- Faculty Development Programme on Outcome Based Curriculum Design – 1 – 5 August 2022, Internal Quality Assurance Cell, B S A Crescent Institute of science and Technology, Chennai
- Seminar on Air Conditioning System Overview – Types and Trends – 01 June 2022 – B S A Crescent Institute of science and Technology, Chennai
- Workshop on Empowering Technology Development and Innovation – Automotive Research Association of India – 21 January 2021.
- Workshop on optimizing a local energy system with wind and solar Energy, 03 November 2020 B S A Crescent Institute of science and Technology, Chennai.
- Workshop on Design and Development of E content on 12 August 2020 at B S A Crescent Institute of science and Technology, Chennai.
- Faculty Development Program on Bio fuels and its Application in IC Engines at MEA Engineering College, Kerala during 1- 5 June 2020
- Webinar on Battery Operated Electric Vehicle – Research Perspective on 26 May 2020 at B S A Crescent Institute of science and Technology, Chennai.
- Workshop on CAD/CAE during 6 – 7 May 2019 at B S A Crescent Institute of science and Technology, Chennai.
- .ICT enabled faculty development Programme on Engineering graphics on 09 July 2019 at B S A Crescent Institute of science and Technology, Chennai
- National conference on Computational Modeling of Fluid Dynamics Problems during 18 – 20 January 2019 at NIT Warangal.
- Workshop on Multiple Intelligence for teaching on 15 September 2018 at B S A Crescent Institute of science and Technology, Chennai.
- International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility during 20 – 21 July 2017 at B S A Crescent Institute of science and Technology, Chennai.
- Work shop on Model Based Systems Engineering in Automotive Applications on 19 July 2017 at B S A Crescent Institute of science and Technology, Chennai.
- Work shop on Fluid Mechanics and Machinery Lab during 23 – 24 December 2014 at B S A Crescent Institute of science and Technology, Chennai.
- Work shop on Research Methodologies during 1 – 15 May 2013 at Jawaharlal Nehru Technological University, Andhra Pradesh
- Work shop on Intellectual Property Rights and Patents during 16 – 30 May 2013 at Jawaharlal Nehru Technological University, Andhra Pradesh
- Faculty Development Programme on soft Skills during 1st and 2st July 2013 at B S Abdur Rahman University, Chennai
- National Conference on Advances in Materials, design and Manufacturing on 17 April 2013 at B S Abdur Rahman University, Chennai.
- Faculty orientation Programme during 27 June – 1 July 2011 at B S Abdur Rahman University, Chennai
- Work shop on Engineering Graphics during 12 – 18 July 2011 at B S Abdur Rahman University, Chennai
- International Seminar on Current Technologies in the field of Noise and Vibration Testing on 11 February 2011 at Jeppiaar Engineering College, Chennai.
- National workshop on Biodiesel basics organized by DRDO on 27 and 28 January 2009 at Jeppiaar Engineering College, Chennai.
- Workshop on Creative Teaching on 22 February 2008 at GKM College of Engineering and Technology, Chennai
- National Conference on Advances in Product design, Materials and Manufacturing Engineering during 24 – 25 January 2008 at B S Abdur Rahman University, Chennai
- Workshop on Student Counseling on 22 March 2008 at National Institute of Technical Teachers Training and Research, Chennai
Awards and Honours
- Best Learning Catalyst award for the year 2020 by Apollo Tyres Ltd, Chennai.
- Best faculty award for the year 2009 and 2010 in the Department of Mechanical Engineering, Jeppiaar Engineering College, Chennai.
- Best faculty award for the year 2006 in the Department of Mechanical Engineering, GKM College of Engineering and Technology, Chennai.
Professional activities
- Doctoral committee Member at Anna University
- Member –Thesis scrutiny committee
- Member – Curriculum Revision Committee
- Examiner for question paper setting at Anna University
- Session Chair – International conference on Design, Manufacturing and Thermal Sciences 2020
- Member – National conference on Technological Advances and Innovations for Socio- Economic Development organized by Indian Social Science Congress 2022
Additional Responsibilities
- Member – Board of Studies
- Member – Department Audit Committee
- Lab In charge – Thermal Engineering Lab
- Coordinator – ISHRAE Professional Society