Dr. Md. Javeed Ahamed

Teaching

• Heat and Mass Transfer
• Fluid Mechanics
• Thermodynamics
• Thermal Engineering
• Gas Dynamics and Jet propulsion
• Nuclear Engineering
• AutomobileENgineering
• Energy Generation and Management
• Renewable Energy sources
• Engineering Graphics

Research

• Natural fibers Characterization.
• Influence of natural fibers in friction composites

Publications

• Stephen Bernard S., Suresh G., Kannan G.K., Lohesh Srinath S.R., Vishweshwaran M., Javeed Ahmed Md “Studies on Mechanical and Physical Characteristics of Cardanol in a High-Friction Composite Material” Lecture Notes in Mechanical Engineering, Springer, Singapore 509-517 (2021). https://doi.org/10.1007/978-981-33-6428-8_42.
• Bernard S.S., Bakkiyaraj M., Javeed Ahmed M.d., Niranjan M.V., Nirmal R., Hemanand K. “Performance Analysis of Oil Expelling Using Vaagai Wood Crusher” Lecture Notes in Mechanical Engineering. Springer, Singapore. pp,455-461 (2021). https://doi.org/10.1007/978-981-33-6428-8_37
• Kannan G.K., Stephen Bernard S., Javeed Ahmed M.d., Ivon Paul A., Suresh G. “Frictional Performance on Various Speed and Pressure for Cardanol as a Binder in High Friction Composite Material Using Pin on Disc” Lecture Notes in Mechanical Engineering. Springer, Singapore. pp- 501-508 (2021). https://doi.org/10.1007/978-981-33-6428-8_41
• S.Stephen Bernard, G. Suresh, M.D. Javeed Ahmed, G. Mageshwaran, V. Madanagopal, J. Karthikeyan “Performance analysis of MWCNT fluid parabolic trough collector for whole year” Materials Today: Proceedings, Vol.45, Part-2, pp- 1308-1311 (2021) Impact Factor: 0.97 https://doi.org/10.1016/j.matpr.2020.05.289
• Vivek.S , Stephen Bernard S , Jayakumari L S , Md.Javeed Ahmed , Arulmurugan.S  “Tribological and mechanical properties of biobased reinforcement in a friction composite material” Revista Materia Volume- 25 issue-3 August 2020Impact factor :0.40 DOI :  10.1590/S1517-707620200003.
• Md Javeed Ahmed, MA Sai Balaji, S. S. Saravanakumar, M. R. Sanjay, and P. Senthamaraikannan. “Characterization of Areva javanica fiber–A possible replacement for synthetic acrylic fiber in the disc brake pad.”Journal of Industrial Textiles , vol.49, Issue no. 3 (Sep 2019): pp.294-317.https://doi.org/10.1177/1528083718779446. (Scopus and WoS indexed, Impact Factor SNIP: 2.010)
• Md, Javeed Ahmed, A. Saibalaji, B. Suryarajan and Yucheng Liu. “Characterization of alkaline treated Areva Javanica fiber and its tribological performance in phenolic friction composites.”Materials Research Express,  vol.6, Issue no. 11 (2019): pp.115-307. https://doi.org/10.1088/2053-1591/ab43ad (Scopus and WoS indexed, Impact Factor SNIP: 1.929)
• Md Javeed Ahmed, MA Sai Balaji, S. S. Saravanakumar, and P. Senthamaraikannan. “A comprehensive physical, chemical and morphological characterization of novel cellulosic fibre extracted from the stem of Elettaria cardamomum plant”Journal of Natural fibers.November 2019https://doi.org/10.1080/15440478.2019.1691121 (Scopus and WoS indexed, Impact Factor SNIP: 2.622)
• Sathickbasha, K., A. S. Selvakumar, MA Sai Balaji, B. Surya Rajan, and MD Javeed Ahamed. “Tribo Performance of Brake Friction Composite with Stainless Steel Fiber.” In Advances in Materials and Metallurgy, pp. 159-169. Springer, Singapore, 2019.https://doi.org/10.1007/978-981-13-1780-4_17.
• Stephen Bernard S., Javeed Ahmed M., Dasaprakash J., Saroj Nitin M.R., Vivek S., Kannan G.K. (2019) Friction and Wear Properties of Bio-Based Abrasive in a High-Friction Composite Material. In: Hiremath S., Shanmugam N., Bapu B. (eds) Advances in Manufacturing Technology. Lecture Notes in Mechanical Engineering. Springer, Singapore.https://doi.org/10.1007/978-981-13-6374-0_63.
• S.Stephen Bernard, G. Suresh, M.D. Javeed Ahmed, G. Mageshwaran, V. Madanagopal, J. Karthikeyan “Performance analysis of MWCNT fluid parabolic trough collector for whole year”Materials Today: Proceedings,June 2020Impact Factor: 0.97 https://doi.org/10.1016/j.matpr.2020.05.289
• Vivek.S , Stephen Bernard S, Jayakumari L S , Md.Javeed Ahmed, Arulmurugan.S  “Tribological and mechanical properties of biobased reinforcement in a friction composite material” Revista Materia Volume- 25 issue-3 August 2020Impact factor :0.40 DOI : 10.1590/S1517-707620200003.

• Javeed Ahmed, M A Sai Balaji and Rajkumar S. Rai “Influence of Alkali treatment in Areva Javanica fiber and its effect in mechanical, physical and tribological behaviour in NAO brake friction composites” TRIBOINDIA International conference held on 10th to 12th December 2020
• Participated in International conference on AI, Robotics and Automation organized by ICT academy of Tamil Nadu on 14th to 18th October 2020
• Sai Balaji M A, Baskar A, Sai Priya A, Md Javeed Ahmed, B.Suryarajan, Correlation of test bench with actual vehicle condition of Indian commercial passenger cars, International Conference onAdvances in Industrial Engineering Applications (ICAIEA 2018) January 3-5, 2018.
• Participated two days National Conference on Recent Trends in Functional Materials (NCRTFM – 2017), at B S Abdur Rahman Crescent Institute of Science & Technology, December 5 & 6, 2017.
• Participated International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility during 20 – 21 July 2017 at B.S.Abdur Rahman Crescent Institute of Science & Technology, Chennai.

• Participated in webinar on Modification of oxidation properties of sulfide mix towards frictional stability in NAO brake” organized by the Department of Mechanical Engineering, BSA Crescent Institute of Science and Technology, Chennai– 48 on 04th June 2020.
• One day national level oneday workshop On “Friction Material Concepts-Electronic braking system” held at B S Abdur Rahman Crescent Institute of Science & Technology, August 28, 2019.
• One day national level workshop on “Effective Teaching Practices” held at B S Abdur Rahman Crescent Institute of Science & Technology, July 3, 2019.
• One day National Level Workshop on Friction Material Concepts, Formulation, Testing & Environmental Issues held at B S Abdur Rahman Crescent Institute of Science & Technology, April 10 2018.
• One day motivational workshop on Innovation, held at B S Abdur Rahman Crescent Institute of Science & Technology, August 8, 2017.
• One day workshop on ”Challenges and innovations in Advanced Polymeric Composite Materials”, during 23rd Feb 2017, at Kamaraj college of Engineering &Technology, Virudhunagar.
• Six Day Faculty Development Programme on FLUID MECHANICS 27th June – 2nd July 2016 held at B.S.Abdur Rahman Crescent Institute of Science & Technology, Chennai.
• Six Day Faculty Development Programme on ENGINEERING THERMODYNAMICS18th – 23rd July 2016 held at B.S.Abdur Rahman Crescent Institute of Science & Technology, Chennai.
• Two days national seminar on POROUS CERAMICS (SERB-DST Sponsored.) held at A.C tech, Anna University campus, 27- 28 MAY 2016.
• Five days training program for ANSYS software from 4th to 8th May 2015 at raining program for ANSYS software B.S.Abdur Rahman Crescent Institute of Science & Technology, Chennai.
• Participated Work shop on Fluid Mechanics and Machinery Lab during 23 – 24 December 2014 at B.S.Abdur Rahman Crescent Institute of Science & Technology, Chennai
• Participated National Conference on Advances in Materials, design and Manufacturing on 17 April 2013 at B.S.Abdur Rahman Crescent Institute of Science & Technology, Chennai.
• Participated Faculty orientation Programme during 27 June – 1 July 2011 at B.S.Abdur Rahman Crescent Institute of Science & Technology, Chennai
• Participated Work shop on Engineering Graphics during 12 – 18 July 2011 at B.S.Abdur Rahman Crescent Institute of Science & Technology, Chennai.

• Filed a national Patent on “DRY MIXING MACHINE AND METHOD OF MIXING FOR FRICTION MATERIALS” at Govt of India Ministry of Commerce & IndustryController General of patent Design & Trade marks, during March 2016. Appl. No. 201641009076.

Extension

• Class Advisor for weekend part-time M.Tech CAD/CAM student’s batch for 2017-2020
• Class advisor for part-time B.Tech Mechanical PT (MANDO) evening batch students from 2018-2021
• Faculty advisor Mechanical “A” section for 2016-2020 batch
• Member – Stock Verification
• Member – Crestech 2017