- Admissions Help Desk
DEPARTMENT OF MECHANICAL ENGINEERING
Mechanical
Dr. H. Siddhi Jailani
 |
| Designation | : | Professor & Dean |
| Nature of Employment | : | Regular |
| Date of Joining | : | 02.07.2012 |
| Qualification | : | B.E.,M.E,Ph.D. |
| Phone | : | +91 44 2275 1347,48,50 (Office) |
| Email ID | : | dean.sms@crescent.education, jailani@crescent.education |
Teaching
Educational Background
| Programme | Discipline | Year of Passing | University |
|---|---|---|---|
| Ph.D. | Composite Materials | March 2013 | MIT Campus, Anna University, Chennai |
| M.E | Production Engineering | Feb 2001 | Madurai Kamaraj University |
| B.E. | Mechanical Engineering | April 1991 | Madurai kamaraj University |
Work Experience
| Designation | Institution | Duration | No. of Years |
|---|---|---|---|
| Professor & Dean | B.S.Abdur Rahman Crescent Institute of Science and Technology, Vandalur, Chennai-600048 | Jan 2023 | Till Date |
| Professor & Head | B.S.Abdur Rahman Crescent Institute of Science and Technology, Vandalur, Chennai-600048 | April 2022 to Dec 2022 | 9 months |
| Associate Professor & Head | B.S.Abdur Rahman Crescent Institute of Science and Technology, Vandalur, Chennai-600048 | Jan 2020 to March 2022 | 2 years 3 months |
| Associate Professor | B.S.Abdur Rahman Crescent Institute of Science and Technology, Vandalur, Chennai-600048 | July 2013 to Dec 2019 | 6 years 5 months |
| Asst. Professor (Sel.Gr) | B.S.Abdur Rahman Institute of Science and Technology, Vandalur, Chennai-600048 | July 2012 to June 2013 | 1 year |
| Associate. Professor | Sethu Institute of Technology, Kariapatti, Virudhunagar Dist. | July 2008 to March 2010 | 1 year 9 months |
| Asst. Professor | Sethu Institute of Technology, Kariapatti, Virudhunagar Dist. | June 2005 to June 2008 | 3 years |
| Senior Lecturer | Sethu Institute of Technology, Kariapatti, Virudhunagar Dist. | July 2003 to May 2005 | 1 year 10 months |
| Lecturer | Sethu Institute of Technology, Kariapatti, Virudhunagar Dist. | Oct 1998 to June 2003 | 4 years 9 months |
| Asst. Plant Engineer | Madurai Cements Ltd., Manamadurai. | June 1992 to July 1997 | 5 years |
Research
Areas Of Research Interest
- Composite Materials
- Powder Metallurgy
- Machining
- Tribology
Research Grant and sponsored Project Details
| S.No | Research Grant and sponsored Project Details | Funding Agency | Amounts in Lakhs (Rs.) |
|---|---|---|---|
| 1 | Non-contact Surface Roughness Measurement of Machined Surfaces using Wavelet Metrics of Laser Speckle Images(2022- 2025) | AICTE | 8.67 |
| 2. | International Conference on “Emerging Trends in Design, Manufacturing, Materials and Thermal Sciences” (ETDMMT 2020) | AICTE | 0.5 |
Research Publications
International Journal
- Samuel Garriba, and, H. Siddhi Jailani, “Extraction and characterization of natural cellulosic fiber from Mariscus ligularis plant as potential reinforcement in composites”, International Journal of Biological Macromolecules 253, 127609.
- J.Ahmed Abdullah Aafaq, and H. Siddhi Jailani, “Multi-response optimization of processing variants to fabricate graphene reinforced Al 2124 metal matrix composite using friction stir processing”, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2023.04.323.
- J.Ahmed Abdullah Aafaq, and H. Siddhi Jailani, “Multi-response Optimization of Process Parameters in Fabricating Al 2124/GO Metal Matrix Composite by Friction Stir Processing”, Arabian Journal for Science and Engineering, 48,pp 3647–3664 (2023).
- Mahashar Ali, H. Siddhi Jailani and M. Murugan, “Speckle Image-Based Surface Roughness Parameter Characterization of Milled Surfaces”, Recent Trends in Product Design and Intelligent Manufacturing Systems, https://doi.org/10.1007/978-981-19-4606-6_57.
- J. Mahashar Ali, H. Siddhi Jailani and M. Murugan, “In-Situ Surface Roughness Evaluation of Surfaces Machined with EDM by Image Processing”, Journal of Nondestructive Evaluation, 41,32 (2022). https://doi.org/10.1007/s10921-022-00864-3.
- C.K. Arvinda Pandian and H. Siddhi Jailani, “Formulation and characterization of jute fabric–linen fabric–fumed silica–epoxy hybrid laminates”, The Journal of The Textile, Institute, 113, pp. 151-158, 2022.
- K Showkat Ali, R Karunanithi, M Prashanth, S Sivasakaran, B Subramanian and H Siddhi Jailani, “Structure and mechanical properties of in-situ synthesized α-Ti/TiO2/TiC hybrid composites through mechanical milling and spark plasma sintering” Ceramics International, 48 (8), pp.11215-11227, 2022.
- C.K.Arvinda Pandian and H. Siddhi Jailani, “Linen Fabric-Jute Fabric-Fumed Silica-Epoxy Sandwich Laminate: AWJ Machining and Multi-Response Optimisation”, Silicon, 13, pp.1239-1248.2021.
- S Jeavudeen, H. Siddhi Jailani and M Murugan, “Enhancement of machinability of titanium alloy in the Eductor based PMEDM process”, SN Applied Sciences, https://doi.org/10.1007/s42452-021-04472-0, 2021.
- S Mohamed Fahad, J Mahashar Ali and H Siddhi Jailani, “Characterization of Surface Roughness of Ground Specimens Using Image Processing”, Advances in Design and Thermal Systems, pp.133-141, 2021.
- J. Mahashar Ali, H. Siddhi Jailani, M. Murugan and S. Mohamed Fahad, “Optical Surface Roughness Evaluation of Ground Specimens Using Speckle Line Images”, SAE Technical Paper, 2020-28-0514.
- S. M.Vinu Kumar, K. L. Senthil Kumar, H. Siddhi Jailani and G. Rajamurugan, ”Mechanical, DMA and Sound Acoustic behaviour of Flax woven fabric reinforced Epoxy composites, Materials Research Express,7,(2020) 085302.
- S. Jeavudeen, H. Siddhi Jailani and M. Murugan, “Effect of process parameters in the machining of Titanium alloy and high speed steel in powder mixed electrical discharge machining process”, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2019.12.156,2020.
- S. Jeavudeen, H. Siddhi Jailani and M. Murugan,” Powder additives influence on dielectric strength of EDM fluid and material removal”, International Journal of Machining and Machinability of Materials (IJMMM), 22(1), pp. 47-61, 2020.
- J. Mahashar Ali, H. Siddhi Jailani and M Murugan, “Surface roughness evaluation of electrical discharge machined surfaces using wavelet transform of speckle line images”, Measurement, https://doi.org/10.1016/j.Measurement.2019.107029,2020.
- J. Mahashar Ali, H. Siddhi Jailani and M.Murugan, “Surface roughness evaluation of milled steel surfaces using wavelet transform of laser speckle line images”, Lasers in Engineering, 44 (4-6), pp. 371-384, 2019.
- C.K. Arvinda Pandian and H. Siddhi Jailani, “Dynamic and vibrational characterization of natural fabrics incorporated hybrid composites using industrial waste silica fumes”, International Journal of Polymer Analysis and Characterization, 24 (8), pp. 721-730, 2019.
- J. Mahashar Ali, H. Siddhi Jailani, Murugan Mariappan, Mangalnath Anandan and Vignesh Pavithran, “Vision based surface roughness characterization of flat surfaces machined with EDM”, SAE Technical Paper, 2019-28-0148, 2019.
- C.K. Arvinda Pandian and H. Siddhi Jailani, “Development and investigation of jute/linen fibre reinforced polymer composite”, SAE Technical Paper, 2019-28-0171, 2019.
- M.Pervaz Ahmed and H. Siddhi Jailani, “Enhancing Wear Resistance of Cryo Treated Cu-Be2 Alloy”, Silicon, 11 (1), 105-115, 2019.
- S.Jeavudeen, H Siddhi Jailani and M. Murugan, “Influence of Thermo-Electrical Property of Materials on Powder Mixed Electrical Discharge Machining”, FME Transaction, Volume 47, pp.518-523, 2019.
- J. Mahashar Ali , H. Siddhi Jailani and M Murugan,”Surface Roughness Evaluation of Milled Surfaces by Image Processing of Speckle and White-Light Images”, Advances in Manufacturing Processes, pp 141-151, 2019.
- S. I. Mohamed Suhail , J. Mahashar Ali , H. Siddhi Jailani and M. Murugan,”Vision based system for surface roughness characterisation of milled surfaces using speckle line images”, IOP Conference Series: Materials Science and Engineering 402 (1), 012054,2018.
- C. K. Arvinda Pandian and H. Siddhi Jailani, “Investigation of viscoelastic attributes and vibrational characteristics of natural fabrics-incorporated hybrid laminate beams” Polymer Bulletin, Volume 75,Issue5,pp. 1997–2014, 2018.
- Pervaz Ahmed Mouda and H. Siddhi Jailani, “Effect of cryogenic treatment of copper electrode on Electro-Discharge Machining”, SAE Technical Paper, 2017-28-1962, 2017.
- H.Siddhi Jailani, A. Rajadurai, B. Mohan and T.Sornakumar, “Sliding wear behaviour of Al-Si alloy–fly ash composites produced by powder metallurgy technique”, Industrial Lubrication and Tribology, Vol. 69(2), pp.241-247, 2017..
- C. K. Arvinda Pandian, H. Siddhi Jailani and A. Rajadurai, “Natural fabric sandwich laminate composites: development and investigation”, Bulletin of Materials Science, Vol.40, pp.139-146, 2017.
- M.Pervaz Ahmed, H.Siddhi Jailani, S.Rasool Mohideen and A. Rajadurai, “Effect of cryogenic treatment on microstructure and properties of CuBe2”, Metallography, Microstructure and analysis, Vol.5, pp.528-535, 2016.
- Pervaz Ahmed Mouda , Abdul Azeez, and H. Siddhi Jailani, “Sliding wear behavior of cryogenic treated copper beryllium alloy”, Applied Mechanics and Materials, Vol. 852, pp. 391-396,2016.
- H. Siddhi Jailani, A. Rajadurai, B. Mohan, A. Senthil Kumar and T. Sornakumar, “Development and properties of aluminium silicon alloy fly ash composites”, Powder Metallurgy, Vol. 54, No. 4, pp.474-479, 2011.
- H. Siddhi Jailani, A. Rajadurai, B. Mohan, A. Senthil Kumar and T.Sornakumar,“Multi- response optimisation of sintering parameters of Al- Si Alloy/fly ash composite using Taguchi method and grey relational analysis”, International Journal of Advanced Manufacturing Technology, Vol. 45, pp.362-369,2009.
National Journal
- H. Siddhi Jailani, A. Rajadurai, B. Mohan and T. Sornakumar, “Evaluation of drilled hole quality of Al Si alloy/fly ash composites produced by powder metallurgical technique”, Indian Journal of Engineering & Materials Sciences, Vol. 22, pp.414 – 420, 2015.
Book Chapter
- C. K. Arvinda Pandian, M. Satthiyaraju and H. Siddhi Jailani, “Effect of Kevlar Fabric on Mechanical Properties of Polymer Composites”, Natural/Inorganic Fillers Reinforced Kevlar Fabric Based Polymer Composites, 2022.
International Conferences
- S.Mohamed Fahad, H. Siddhi Jailani and J. Mahashar Ali, “In-Situ fractal roughness evaluation of ground surfaces using bi orthogonal wavelet”, 4th International Conference on Advances in Mechanical Engineering (ICAME 2022), March 24-26, 2022.
- Mohamed Fahad, H. Siddhi Jailani and J. Mahashar Ali, “A comparative study on Surface Characteristics of Orthodontic Brackets and Arch Wires”, 4th International Conference on Advances in Mechanical Engineering (ICAME 2022), March 24-26, 2022.
- J. Mahashar Ali, H. Siddhi Jailani and M. Murugan, “Characterizing the Surface Roughness of Milled Surfaces using Speckle Image-based Surface Roughness Parameter”, 3rd Innovative product design and Intelligent Manufacturing Systems (IPDIMS 2021), December 30-31,2021.
- H. Siddhi Jailani and S. Jeavudeen, “Effect of process parameters in machining of Titanium alloy and Tool steel in PMEDM process”, International Conference on Recent Advances in Materials and Manufacturing (ICRAMM 2019), September 12-14, 2019.
- D. Maniraj, C. K. Arvinda Pandian and H. Siddhi Jailani, Development öf Natural Fibres Reinforced Polymer Hybrid Composites”, International Conference on Automobile, Marine and Mechanical Engineering (ICAMME 2018), May 4-5, 2018.
- S. I. Mohamed Suhail , J. Mahashar Ali and H. Siddhi Jailani and M. Murugan, “Vision based system for Surface Roughness Characterization of milled surfaces using Speckle Line images”, 2nd International Conference on Advances in Mechanical Engineering,(ICAME-2018) March 22-24, 2018.
- J. Mahashar Ali, H. Siddhi Jailani and M. Murugan, “Surface Roughness Evaluation of Milled Surfaces by Image Processing of Speckle and White Light Images International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018), 15-16 February 2018.
- M.Pervaz Ahmed and H.Siddhi Jailani, “Effect of Cryogenic Treatment of Copper Electrode on Electro-Discharge Machining”, SAE Paper No.2017-28-1962, International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility ” (ADMMS 2017), 19-21, July 2017.
- C.K.Aravinda Pandian, K.Koppiahraj and H.Siddhi Jailani, “Investigation and development of polymer composite incorporated natural fabrics: Jute and linen”,in Proc. of International Conference on Advancements in Polymeric Materials (APM 2016), 12-14, February 2016.
- M.Pervaz Ahmed, H.Siddhi Jailani and S.RasoolMohideen, ”Effect of Cryogenic Treatment on Copper Beryllium Alloy”, in Proc. of International Conference on Advances in Design & Manufacturing 2014 (ICAD&M’14),5 – 7, December 2014.
- H.Siddhi Jailani, A.Rajadurai,B. Mohan, A.Senthil Kumar and N.Mohan, ”Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi Method and Grey Relational Analysis”, in Proc. of International Conference on Active/Smart Materials (ICASM 2009), 7-9 January 2009.
- H.Siddhi Jailani , A.Poomari , M.Adam khan and Manivelan,V, “Analysis of Hammer Crusher through Probability Distribution”, International Conference on Responsive Supply Chain and organizational competitiveness RSC-2004 , Coimbatore Institute of Technology, Coimbatore, 5-7 Jan 2004.
National Conferences
- H.Siddhi Jailani, A.Rajadurai, B.Mohan, T.Sornakumar, “Optimization of drilled hole quality parameters of Al Alloy/Fly ash composite produced by Powder Metallurgy Technique”, in Proc. of National Conference On Recent trends in Manufacturing Technology (RTMT 2011), 11-12, March 2011.
- H.Siddhi Jailani, A. Rajadurai, B.Mohan, T.Sornakumar,A.Senthil Kumar, J.RonaldAseer, “Optimisation of drilling process parameters using Taguchi Method”’, in Proc. of National conference on optimization techniques in Engineering Sciences and Technologies (OPTEST 2009), 27-28 March 2009.
- H.Siddhi Jailani, A.Rajadurai,B.Mohan, A. Senthil Kumar, “Development of Al alloy – fly ash composite using conventional powder metallurgy Technique”,in Proc. of National Conference on Advances in Robotics, Precision Engineering and Manufacturing Techniques (AIRPAM 2008), 14-15, March 2008.
- H.Siddhi Jailani, A.Rajadurai, B.Mohan, A.Senthil Kumar, “Effect of compacting pressure on Al alloy – Fly ash powder mixtures”, in Proc. of National Conference On Challenges and innovative practices in Design, Manufacturing and Materials (NCCIPDMM 2008), 12-13, March 2008.
- H. Siddhi Jailani, A.Poomari,,G.Kalyana Shuresh and M.Adam khan, “Reliability analysis in process industry-A case study”, Second National Conference On Mathematical and Computational Models,11-12 Dec 2003.
Ph.D. Scholars
| S.No | Name | Title | Mode | Session | Status |
|---|---|---|---|---|---|
| 1 | Mr. M. Pervaz Ahmed (1181210) | Influence of Cryogenic Treatment on Cu – 2 wt. % Be Alloy | Part-Time | July 2011 | Completed |
| 2 | Mr. S. Jeavudeen (1181212) | Investigation of Mechanism and Optimization of Machining Parameters in the Novel Eductor based PMEDM Process | Part-Time | July 2011 | Completed |
| 3 | Mr. J. Mahashar Ali (130813704001) | Surface roughness evaluation of machined surfaces using image processing, | Part -Time | July 2013 | Completed |
| 4 | Mr. C.K. Arvinda Pandian (130813704002) | Development and investigation of properties of Jute-Linen–Epoxy composite Laminates | Part -Time | July 2013 | Completed |
| 5 | Mr. Ahmed Abdullah Aafaq (170813104001) | Metal matrix composites | Part- Time | Jan 2017 | Comprehension Exam Completed |
| 6 | Mr. Samuel Garriba (190813704003) | Polymer matrix composites | Part- Time | Jan 2019 | Comprehension Exam Completed |
| 7 | Mr.S. Mohamed Fahad (210833101001) | Image Processing | Full Time | Jan 2021 | Course Work Completed |
Patents Details
| S.No | Name of the Applicants | Title of Patent | Patent Application Number & Date | Status |
|---|---|---|---|---|
| 1 | J. Mahashar Ali, Dr. H. Siddhi Jailani Dr. M. Murugan | System and method for analysis of roughness quality of flat specimens using image processing | 201941019465 & 16.05.2019 | Published |
| 2 | S. Jeavudeen Dr. H. Siddhi Jailani Dr. M. Murugan | Eductor based powder-mixed electric discharge machining (PMEDM) setup | 201941019464 & 16.05.2019 | Published |
| 3 | Mr. C.K. Arvinda Pandian Dr. H. Siddhi Jailani | Interior door skin materials for four wheeler | 201941020382 & 23.05.2019 | Published |
| 4 | Pervaz Ahmed M, Dr. H. Siddhi Jailani, Dr. Rasool Mohideen S. | Machining performance of cryogenically treated copper 2 wt.% – Beryllium alloy electrode | 202041000083 & 02.01.2020 | Published |
Extension
FDPS / Seminars / Workshops / Conferences Attended
- Webinar on 10 steps to become an Entrepreneur on 13th May 2020 at BSA Crescent Institute of Science and Technology, Chennai.
- Webinar on Blue ocean strategy for startups to swim across the Covid-19 on 7th May 2020 at BSA Crescent Institute of Science and Technology, Chennai.
- Training Programme on Academic Leadership during 01 – 07, April 2019 at BSA Crescent Institute of Science and Technology, Chennai.
- Application of Ceramic & Polymer in 3D printing on 16th March 2019 at Anna University, Chennai.
- One-day national seminar on Ceramic Composites on 22nd Sep 2017 at Anna University, Chennai.
- Post Indo-Japan Symposium Workshop on Thermal Spray Coatings and Applications on 18 th July 2018 at IIT Madras.
- International Conference on Advances in design, Materials, Manufacturing and surface engineering for mobility ADMMS 2017 during 19-21, July 2017 at B.S.Abdur Rahman Crescent University, Chennai.
- Induction Training Programme for Faculty during 2-6 July 2012 at B.S.Abdur Rahman University.
- Short-term courses on Electron Microscopy (EM – 2008) during 6 – 8 Sep 2008 at NIT, Tiruchirappalli.
- Workshop on Groundwater Awareness Programme on 18th March 2008 at Sethu Institute of Technology, Kariapatti.
- Faculty development program conducted by Ripe during 28 -29 June 2007 at Sethu Institute of Technology, Kariapatti.
- Workshop on Advances in Manufacturing Technology on 10th March 2007 at MIT Campus, Anna University, Chennai.
- Workshop on Recent Trends in Supply Chain Management during 26 -27 May 2006 at NIT, Tiruchirappalli.
- Workshop on ANSYS during 15 – 17 Dec 2005 at Sethu Institute of Technology, Kariapatti.
- Short-term training program on CNC Milling Training Course during 21 – 26 March 2005 at MTAB- DENFORD Technology Centre, Chennai.
- Short-term training program on Cleaner Manufacturing in Industries during 25th Oct to 7th Nov 2004 at Amrita Institute of Technology, Coimbatore.
- Workshop on Metaheuristics on Operation Management during 6 – 8 Nov 2003 at Sethu Institute of Technology, Kariapatti.
- Short-term courses on Calibration of dimensional measuring instruments and gauges during 16 – 20 Dec 2002 at Advanced Training Institute, Chennai.
FDP / Workshops Organized
- Faculty Development Programme on Engineering Graphics from 08 to 12, July 2014 at BSA Crescent Institute of Science and Technology, Chennai.
- National Level Workshop on Advanced Composite Materials – A research Perspective on 2nd &3rd Feb 2018 at BSA Crescent Institute of Science and Technology, Chennai.
Additional Responsibilities
- Coordinator forB. Tech (Mechanical Engg.) Curriculum and Syllabus (R 2017)
- Department Coordinator for Academic Research (2017 – 2019)
- Department Academic Audit Committee (DAAC) member
- Member of the Academic Council
- BoS Member
- Member of the Placement and Training Advisory Committee
