Dr Mohamed Bak Kamaludeen

Teaching

Educational Background

Work Experience

Lecture Courses

Subject handled for UG

• Solid Mechanics
• Fatigue and Fracture
• Elements of Aeronautics
• Aircraft Structures
• Composite Materials and Structures
• Finite Element Analysis
• Theory of Vibration and Aero Elasticity
• High Temperature Materials
• Product Design and Manufacturing
• CAD/CAM

Research

Area of Research Interest

• Aerospace Composite Materials
• Design
• Non Destructive Testing
• Structural Mechanics

Publications

LIST OF JOURNAL PUBLICATIONS (h Index: 82, http://scholar.google.co.in/Mohamed Bak)

• Mohamed Bak, K, Raj Kumar, G, Ramasamy N and Vijayanandh, R, “Experimental and Numerical studies on the mechanical characterization of EPDM / S-SBR Nano clay composites”, Materials Science and Engineering, IOP Publishing,912 (2020).
• Mohamed Bak, K,J. Lokeshkumar, , N. Ramasamy “Compressive response on Kevlar hybrid Composite Pipe under Sea Water Environment” Proceedings of International Conference on Recent Trends in Mechanical and Materials Engineering, AIP Conf. Proc. 2283, 020086-1–020086-7, 2020; https://doi.org/10.1063/5.0025018.
• Mohamed Bak, K, “Mechanical Investigation of coconut coir reinforced epoxy composite spur gear”, ICSTEE 2020.
• G Rajkumar, Mohamed Bak K , R Vijayanandh “Mechanical characterization of carbon fiber reinforced epoxy with carbon nanotubes”, International Journal of Mechanical and Production Engineering Research and Development,  9 (1), 243-255, 2019.
• Mohamed Bak . K, KalaiChelvan. K “Stress prediction of GFRP and BFRP Lap joints Using FEA” Journal of Surface and colloid Science,2017; 2(3): 114-117.
• Mohamed Bak . K, KalaiChelvan. K “Acoustic emission characterization of failure modes of bonded, riveted, and hybrid single lap joints in GFRP laminate” Journal of Composite materials,2016, Vol. 50(1) 3–23ISSN: 0021-9983.
• Mohamed Bak . K, KalaiChelvan. K  “Effect of pure resin and single layer of adhesively bonded lap joints using acoustic emission data” Journal of TIIM,Springer publications,2015, Vol. 68, Pp no.73–82ISSN: 0975-1645.
• Mohamed Bak . K, KalaiChelvan. K   “Experimental Study on the Mechanical Characterization of Glass-Basalt Fiber Reinforced Polymer (Frp) Composites” International Journal of Materials Science and Engineering, Vol:4, Pp 46-53, 2016ISSN: 2315-4527.
• Mohamed Bak . K, KalaiChelvan. K  and V. Arumugam “A novel approach for classification of failure modes on single lap joints in basalt laminate” Journal of Composite materials, 2014, Vol.48 (24), pp no.3003-3017.Impact Factor: 1.8ISSN: 0021-9983.
• Mohamed Bak . K, KalaiChelvan. K,  VijayaRaghavan G.K, Sridhar B.T.N” Acoustic emission wavelet transform on adhesively bonded single-lap joints of composite laminate during tensile test” Journal of Reinforced plastics and composites,January 2013 32: 87-95. (Impact Factor:1.2)ISSN: 0731-6844
• Mohamed Bak . K, KalaiChelvan. K  “Fabrication and testing of hybrid composite plates for stealth aircraft using microwave oscillator”Invertis Journal of Science and Technology, Vol: 9(2), Pp.112-117,2016.ISSN:0973-8940.
• Mohamed Bak . K, KalaiChelvan.K,VijayaRaghavan G.K, Arumugam V“Study on effect of adhesive thickness of single lap joints in composite laminate using AE and FEA” BINDT-an International journal, Insight – Non-Destructive Testing and Condition Monitoring, Volume 55,Number 1, January 2013, pp. 35-41(7).(Impact Factor:0.56)ISSN:0007-1137
• Mohamed Bak. K, KalaiChelvan.K“Fatigue damage mechanisms in Fiber reinforced Al₂O₃particle hybrid composite laminate’ Springer Proceedings, Lecture notes on Mechanical Engineering, INCOST 2012ISSN: 2195-4356.
• Mohamed Bak . K, KalaiChelvan.K“Parametric study of Bonded, Riveted and Hybrid joints using FEA” Journal of Applied Science, Volume:12 (10),1058-1062,2012. (Impact Factor:0.25) ISSN1812-5654
• Mohamed Bak. K“Experimental Investigation and CFD analysis of Missile with Grid fin in subsonic flow” International Journal of Engineering Science and Technology, Vol (10), 2010ISSN: 0975–5462.
• Mohamed Bak. K, KalaiChelvan.K “Finite Element analysis of hybrid composite joints” Journal of Future Engineering and Technology, i-manager’s Journal on Future Engineering & Technology, Vol. 6 (2), November 2010 – January 2011ISSN, 2230-7184.

Google Scholars Citation

Acoustic Emission, Composite Materials and Structures

International Conferences

• Mohamed Bak . K, Rajarajeshwari K “Mechanical simulation of vehicle suspension system for power generation”IEEE Digital Library, 2017, 978-1-4673-8855-9/17.
• Mohamed Bak .K ,VijayaAnand , Raj Kumar G “ Experimental and numerical analysis of fatigue life of Al 7076 T6” RIPE, MIT Campus, Anna University, 2017.
• Mohamed Bak . K, KalaiChelvan. K “Fabrication and testing of hybrid composite plates for stealth aircraft using microwave oscillator”International Symposium on Semiconductor Materials and Devices (ISSMD-3), 2-5’ February 2015, Anna University, Chennai.
• Mohamed Bak . K, KalaiChelvan. K “Identification of Failure Modes on Single and Double Lap Bonded Joints Using Acoustic Emission Data”International conference on Materials, manufacturing and Metrology, IIT Madras, 8-9August, 2014, Chennai.
• Mohamed Bak . K, KalaiChelvan. K “Acoustic emission technique on effect of adhesive thickness of single lap joints in composite laminate” International conference on AMPC,2013, Volume: 1, Pp; 246-256, Anna University, Chennai.
• Mohamed Bak . K, KalaiChelvan. K “Processing and mechanical characterization of GFRP specimens” International conference on AMP, 2012 organized by R.M.K Engineering College, Chennai.
• Mohamed Bak . K, KalaiChelvan. K “Parametric study of Bonded, Riveted and Hybrid composite joints using FEA” International conference on IMS, 2012 organized by SASTRA University.
• Mohamed Bak . K, KalaiChelvan. K “Identification of Failure modes on adhesively bonded joints of composite laminate using AE” International conference on INCRAME 2011, organized by Dr.M.G.R University.
• Mohamed Bak . K, KalaiChelvan. K “Experimental and numerical work on fatigue behavior of hybrid composites under reversed cyclic loading” International conference on INCRAME 2011, organized by Dr.M.G.R University.

National Conferences

• Mohamed Bak . K, KalaiChelvan. K “Finite Element Analysis of Hybrid Composite Joints” National conference on RIPE, organized by MIT Campus, Anna University.
• Mohamed Bak . K, KalaiChelvan. K  “Fabrication and testing of Hybrid composite plate using Microwave oscillator” National conference on RTME 2011, organized by SRR Engg College, Chennai.
• Mohamed Bak . K, KalaiChelvan. K “Identification of failure modes on Single and Double layer of GFRP using Acoustic Emission Data” National conference on RAMM 2013, organized by Velammal Engineering College, Chennai.

Seminar / Workshop Organized and Attended

• Participated the International Virtual Workshop on “Advancements in Design and Materials for product development”, organized by Department of Mechanical Engineering, Vellore Institute of Technology (VIT), Vellore during the period of 3 & 4 October 2020.
• Participated the AICTE sponsored STTP on “ Be the Change Teaching Learning Process”, organized by HR & faculty Training Academy, BSAR Crescent Institute of Science And Technology, Chennai during the period of 07.12.20 to 12.12.2020.
• Participated the 2nd live FDP on “Application of Moodle LMS” organized by the Department of Management Studies, BSACIST In Collaboration with DY Patil College of Engineering, Pune from 11th – 25th July 2020.
• Attended the Webinar on “Virtual Labs for Mechanical Engineering”, organized by Mathworks, Chennai on 24.8.2020.
• Participated the STTP (Virtual Mode) on “Writing and Publishing High Impact Research Publications and Scientific Documents” organized by AICTE and Raja Lakshmi Engineering College during the period of 5.10.20 to 10.10.2020.
• Participated the webinar on” Need of Cyber Security Skills & Job Opportunities” organized by Skills India Ltd, Chennai on 7.7.2020.
• Attended the Webinar on “Welding of Nickel Based Super alloys: Scope and Challenges” conducted by Department of Mechanical Engineering, KPR Institute of Engineering and Technology on 20.7.20.
• Participated in TWO days seminar on ‘Role of Smart Materials in Aerospace and Engineering Applications” sponsored by DST and Organized by St.Joesph College of Engineering, Chennai, 2019.
• Participated in One day workshop on “Thing Worx IIOT (Internet of Things)” Organized by Adroitec Software Solutions Ltd, Chennai, 2019.
• Participated in TWO days seminar on ‘Role of Smart Materials in Aerospace and Engineering Applications” sponsored by DST and Organized by St.Joesph College of Engineering, Chennai, 2019.
• Participated in One day workshop on “Thing Worx IIOT (Internet of Things)” Organized by Adroitec Software Solutions Ltd, Chennai, 2019.
• Participated in One Week seminar on ‘LabVIEW in Engineering Applications” sponsored by National Instruments and Organized by Coimbatore Institute of Technology, Coimbatore, 2018.
• Participated in the FDP on Experimental Teaching on LabVIEW organized by Coimbatore Institute of Technology and MHRD, New Delhi during 08 th to 13 th September 2018.
• Organized and conducted a One day National level workshop on “Lean Six Sigma Process” hosted by Intelligence Quality Ltd, Chennai on 01/9/17.
• Organized and conducted a One day National level workshop on “Quality Control and Quality Assurance” hosted by Metal Scan Research Centre, Kochi on 24/8/17.
• Convener for National conference on RTAE, Organized by Department of Aeronautical Engineering, Dhanalakshmi Srinivasan College of Engg& Tech, Chennai during 2012-2013.
• Convener for National symposium on Flyerz’14, Organized by Department of Aeronautical Engineering, GKM College of Engg& Tech, Chennai during 2014-15.
• Participated in the National workshop on Recent Advances in Characterization of Aerospace Materials through Impact Testing organized by Centre for Aerospace Research, MIT campus, Anna University, during 22 nd and 23 rd March 2013.
• Participated in the FDP on Advanced Mechanics of Materials organized by AICTE, IIT Madras during 17 th to 22 nd 2007.
• Participated in a Mission 10 X workshop conducted at GKM College of Engineering & Technology from 20 th June to 24 th June 2011.
• Participated in the National workshop on “Role of NDT & Metallography in Failure Analysis” organized by Society for Failure analysis, Chennai centre.
• Attended the National Level course on Gas Dynamics organized by Tagore Engg College and IIT Kanpur during 12 th to 17 th May 2008.
• Participated in FDP on Finite Element Analysis organized by Vel Tech University during 7 to 9 th January 2010.

Reviewer For Journals

• Journal of Reinforced Plastics and Composites
• Journal of Non Destructive Evaluation
• Journal of Composite Materials
• Journal of advances in Mechanical Engineering and Science

Significant Academic Contributions

• Member of Academic Council
• Committee for International Conference
• NAAC,NBA And ISO Coordinator
• Project Coordinator
• Students Counselor
• Class Advisor

Extension

Membership

• Aeronautical Society of India : Associate Member
• Institution of Engineers : Associate Member
• International Association of Engineers : Senior Member

Additional Responsibilities

• Aeronautical Society of India – Associate Member
• Institution of Engineers – Associate Member
• International Association of Engineers – Senior Member
• Steering committee Member for the National Board of Accreditation (Criterion V-Faculty Information and Contributions (Research Consultancy)-200 Marks)
• Co- ordinator of Mechanical Department during 2016-17 at SSIET, Coimbatore for the National Assessment and Accreditation Council (Criterion I-Curriculum Aspects-100 Marks)
• Member of Academic Council in Kumaraguru College of Technology
• Committee for International Conference on HEMSI,SHAR Chapter, Tagore Engg College during 2007.
• NAAC, NBA And ISO Coordinator
• Project Coordinator, Dhanalakshmi Srinivasan College of Engg. & Tech, Chennai during 2012-2013 and GKM College of Engineering and Technology during 2014-2015.
• Students Counselor, Dhanalakshmi Srinivasan College of Engg. & Tech, Chennai during 2012-2013.
• Question Paper Setting Examiner for Anna University, SRM University, Sathyabama University, Chennai and VM University, Salem.
• Establishing laboratories and preparation of lab quotation
• Determining course calendar for the ongoing semesters
• Arranging industrial visits and placement activity to students (on campus & off campus)
• Course material preparation and updating according to university norms
• Chief Anna University Representative and Examiner for conducting the university exams.
• Internal/External examiner for Laboratory practical exams in Anna University