Dr. H. Siddhi Jailani | Crescent Education
Admissions Open - 2020
*Anti-Ragging Cell Control Rooms / Helplines: 91(44) 22759200 Ext 212 & 91(44) 22759200 Ext 198 / 131 / 133 *Internal Complaints Committee to Prevention, Prohibition and Redressal of Sexual Harassment of Women Employees and students at Workplace (Helpline: 91-044-22759200 Extn:343) *Students having any grievance on academic matters may contact dean_student@crescent.education

Dr. H. Siddhi Jailani

Designation : HOD & Associate Professor
Nature of Employment : Regular
Qualification : B.E.,M.E,PhD
Phone :
Email ID : hodmech@crescent.education, jailani@crescent.education


Educational Background

Programme Discipline Year of Passing University
Ph.D. Composite Materials March 2013 Anna University
M.E Production Engineering Feb 2000 Madurai Kamaraj University
B. E Mechanical Engineering April 1991 Madurai kamaraj University

Work Experience

Designation Institution Duration No. of Years
Associate Professor B.S.Abdur Rahman Institute,vandalur,
July, 2013to Till date
Asst. Professor (Sel.Gr) B.S.Abdur Rahman Institute,vandalur,
July, 2012 to June 2013 1 years
Associate Professor Sethu Institute of Technology,Kariapatti,
Virudhunagar Dist.
July 2008 to March 2010 1 year 9 months
Asst. Professor Sethu Institute of Technology,Kariapatti,
Virudhunagar Dist.
June 2005 to June 2008 3 years
Senior Lecturer Sethu Institute of Technology,Kariapatti,
Virudhunagar Dist.
July 2003 to May 2005 1 year 10 months
Lecturer Sethu Institute of Technology,Kariapatti,
Virudhunagar Dist.
Oct 1998 to June 2003 4 years 9 months
Asst. Plant Engineer Madurai Cements Ltd.,
June1992 to July
5 years


Areas Of Research Interest

  • Composite Materials
  • Powder Metallurgy
  • Machining
  • Tribology

Research Publications

International Journal

  • M.Pervaz Ahmed,H.Siddhi Jailani, S.Rasool Mohideen,A. Rajadurai, “Effect of cryogenic treatment on microstructure and properties of CuBe2”, Metallography, Microstructure and analysis,DOI 10.1007/s13632-016-0314-9,2016.
  • Pervaz Ahmed Mouda , Abdul Azeez, H.Siddhi Jailani, “Sliding wear behavior of cryogenic treated copper beryllium alloy”, Applied Mechanics and Materials, Vol. 852, pp. 391-396,2016.
  • H.SiddhiJailani,A.Rajadurai, B.Mohan, A. Senthil Kumar, T.Sornakumar,“Development and properties of aluminium silicon alloy fly ash composites”, Powder Metallurgy, Vol. 54, No. 4, pp.474-479, 2011.
  • H.SiddhiJailani,A.Rajadurai, B.Mohan, A. Senthil Kumar, T.Sornakumar,“Multi- response optimisation of sintering parameters of Al- Si Alloy/fly ash composite using Taguchi method and grey relational analysis”, International Journal of Advanced Manufacturing Technology, Vol. 45, pp.362-369,2009.

National Journal

  • H.SiddhiJailani,A.Rajadurai, B.Mohan, T.Sornakumar,“Evaluation of drilled hole quality of Al Si alloy/fly ash composites produced by powder metallurgical technique”, Indian Journal of Engineering & Materials Sciences, Vol. 22, pp.414 – 420, 2015.

International Conference

  • C.K.Aravinda Pandian, K.Koppiahraj,H.SiddhiJailani, “Investigation and development of polymer composite incorporated natural fabrics: Jute and linen”,in Proc. of International Conference on Advancements in Polymeric Materials (APM 2016), 12-14, February 2016.
  • M.Pervaz Ahmed, H.Siddhi Jailani, S.RasoolMohideen, ”Effect of Cryogenic Treatment on Copper Beryllium Alloy”, in Proc. of International Conference on Advances in Design & Manufacturing 2014 (ICAD&M’14),5 – 7, December 2014.
  • H.SiddhiJailani, A.Rajadurai,B. Mohan, A.Senthil Kumar, N.Mohan, ”Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi Method and Grey Relational Analysis”, in Proc. of International Conference on Active/Smart Materials (ICASM 2009), 7-9 January 2009.

National Conference

  • H.SiddhiJailani,A.Rajadurai, B.Mohan, T.Sornakumar, “Optimization of drilled hole quality parameters of Al Alloy/Fly ash composite produced by Powder Metallurgy Technique” ,in Proc. of National Conference On Recent trends in Manufacturing Technology (RTMT 2011), 11-12, March 2011.
  • H.SiddhiJailani, A. Rajadurai, B.Mohan, T.Sornakumar,A.Senthil Kumar, J.RonaldAseer, “Optimisation of drilling process parameters using Taguchi Metho”’, in Proc. of National conference on optimization techniques in Engineering Sciences and Technologies (OPTEST 2009), 27-28 March 2009.
  • H.SiddhiJailani, A.Rajadurai,B.Mohan, A. Senthil Kumar, “Development of Al alloy – fly ash composite using conventional powder metallurgy Technique”,in Proc. of National Conference on Advances in Robotics, Precision Engineering and Manufacturing Techniques (AIRPAM 2008), 14-15, March 2008.
  • H.SiddhiJailani,A.Rajadurai, B.Mohan, A.Senthil Kumar, “Effect of compacting pressure on Al alloy – Fly ash powder mixtures”, in Proc. of National Conference On Challenges and innovative practices in Design, Manufacturing and Materials (NCCIPDMM 2008), 12-13, March 2008.


  • Faculty Advisor
  • Class committee chairman
  • Coordinator for M.Tech (Manufacturing )Curriculum and Syllabus preparation
  • Department ISO Coordinator
  • Department Coordinator for Research review meeting
  • Department DAAC Committee member