The department has the laboratories such as Electric machines lab, Special machines lab, Electric circuits lab, control system lab, Measurements and instrumentation lab, power electronics lab, Electronic devices and circuits lab, Computer lab for UG , Computer lab for PG, R &D lab and Mini High voltage lab. All the laboratories have well equipped instruments and apparatus required to fulfil its objectives.

1. Electric Vehicle Laboratory

The Electric Mobility Laboratory was established in 2023 under Department of Electrical and Electronics Engineering. It is a pioneering research facility dedicated to advancing the frontiers of Electric Vehicle (EV) technology. This state-of-the-art laboratory serves as a focal point for innovation, and sustainable transportation research. The primary objective of this laboratory includes the analysis of electric motor systems, batteries and optimization of power electronics applied for EV. This also facilitates to focus research in the area of development of efficient power converters, motor control algorithms, and integration strategies to enhance the overall drivetrain efficiency. The laboratory’s strategic initiatives align with the national agenda for clean and green mobility, contributing to the broader vision of fostering a sustainable and energy-efficient transportation ecosystem in India.

2. Electronic devices & circuits Lab

Electric Circuits laboratory is to impart hands on experience in verification of circuit laws and theorems, measurement of circuit parameters, study of circuit characteristics and simulation of time response. It also gives practical exposure to the usage of CRO, power sources, function generator etc.

3. Electrical Machines – I Lab

Understanding the fundamental of DC machines and transformer is the scope of this lab. Electrical Machine lab is equipped with DC machines, transformer and induction machines for academics and for research work .Motor-generator set, induction motor, compound machines, DC motors, Single phase, three phase transformers and auto transformers are in available for the conduction of experiments.

4. Electrical machines – II Lab

Special Machines and Electric Drives Laboratory swank of state of art equipment and modern software tools and hardware like labview, Magnet 6.0, and work bench for real time drive applications, Students are exposed to the best experimental practices under the leadership of specialist faculty members.

Automation of electrical Machines through labview, magnet 6.0 helps students to carry out their mini project and main project.

This lab supports the research and development activities in postgraduate level and research level.

5. Control system Lab

Control system laboratory is to provide sound knowledge in the basic concepts of linear control theory and design of control system, to understand the methods of representation of systems and getting their transfer function models, to provide adequate knowledge in the time response of systems and steady state error analysis, to give basic knowledge is obtaining the open loop and closed–loop frequency responses of systems and to understand the concept of stability of control system and methods of stability analysis. It helps the students to study the compensation design for a control system. This lab consist of DC,AC servomotor, synchros, DC position control, PID controller kit with temperature control, lead lag compensator kit, PLC kit, Stepper, process control simulator.

6. Measurement and Instruments Lab

Measurements and Instrumentation Laboratory is to reinforce the students with an adequate work experience in the measurement of different quantities and also the expertise in handling the instruments involved. It also helps to train the students in the measurement of displacement, resistance, inductance, torque and angle etc., and to give exposure to AC, DC bridges and transient measurement.

7. Department computer lab

Computer Lab for U.G is adequate, well-equipped laboratories are available in the department to meet the curriculum requirements. The There are 18 latest software packages namely, EUROSTAG, CASPOC, FEADMOS,CYME, VISSIM, Code Composer Studio, MATLAB, PSCAD, ETAP,PSIM, MAGNET, LABVIEW, PSPICE, MATHCAD, ANSYS, POWER WORLD SIMULATOR, AUPOWER LAB,PSAT, GAMS, EMTP, AUTOCAD are available in the Department.

Experiments in basic Electric and Electronic circuit, Power System Analysis, Power System Operation & Control, De-regulated Power System, Wind Energy Conversion System, etc., are being conducted in the Power System Simulation Lab with the available software.

8. Power Electronics Lab

Power Electronics laboratory is to study the characteristics of switching devices and its applications in rectifier inverter, chopper and resonant converter. It also introduces the application of electronic devices for conversion, control conditioning of electric power. Further it helps the students to get an overview of different types of power semi-conductor devices and their switching characteristics and to understand the operation, characteristics and performance parameters of controlled rectifiers, to study the operation , switching techniques, modulation techniques of pulse width modulated inverters and to understand the harmonic reduction method.

9. PCB Fabrication Lab

The PCB fabraction plant consists of equipmet like PCB baking oven, Drilling machine,PCB cutter,Photo resist DIP coating machine,Etching Machine,Dye developer and UV illuminator. PCB of size 6 x 4 inch can be designed. A compact machine capable of designing primary single side and double side boards in batch is available. For baking and drying PCB’s, PCB baking oven capable of handling 300 x 250 mm size at a time is used for process.A compact dip coating machine is available for coating liquid photo resist on PCB, aluminium panels for anodising or any job involving photo chemical milling.

PCB baking oven, Drillingmachinecutter, Photo resist DIP coating machine, EtchingMachine, Dyedeveloper, Illuminator

10. Industrial Automation Lab

The Industrial Automation and Drives Lab contain multiple workstations equipped with Computers, Siemens’s PLC units and other interfacing devices to train students how to Program with ladder logic using built – in PROFINET for Industrial Automations. This lab also has various drives, which aims at providing the users the knowledge about interfacing software packages and hardware drives related to power electronics. The Siemen’s PLC is able to provide an easier design and control of controllers like Automatic Stamp machines, temperature and Pressure Controllers, etc.., It is also used to interface the control system with smart phones.