 |
| Designation | : | Assistant Professor |
| Nature of Employment | : | Regular |
| Qualification | : | B.Tech,M.Tech, Ph.D. |
| Phone | : | 8004743259 |
| Email ID | : | serajulhaque@byt.digital/wordpress/crescent |
Teaching
Educational Background
| Degree | Discipline | Year of Passing | University |
|---|---|---|---|
| Ph.D. | Production Engineering | March 2017 | Integral University, Lucknow |
| M.Tech | Industrial &Production Engineering | Jan 2008 | Aligarh Muslim University, Aligarh |
| B. E. | Mechanical Engineering | July2005 | Aligarh Muslim University, Aligarh |
Work Experience
| Designation | Institution | Duration | No. of Years |
|---|---|---|---|
| Assistant Professor | B.S.Abdur Rahman Institute | 18 Sep 2017 | Till date |
| Assistant Professor | Bahir Dar University, Ethiopia | Oct 2014 to 11 Sep.2017 | 3 years |
| Assistant Professor | Azad Technical Campus, Lucknow | Aug.. 2013 to Sep. 2014 | 1 year |
| Lecturer | King Khalid University, Saudi Arabia | Dec.2011 to Aug. 2013 | 1 years and 9 months |
| Assistant Professor | Integral University, Lucknow | Jan 2008 to Dec 2011 | 4 year |
| Site Engineer | Power Engineers(India) | July 1999 to June 2001 | 2 years |
Research
Areas Of Research Interest
- Metal Matrix Composite
- Unconventional Machining
- Ergonomics & Human Factor Engineering
- Manufacturing System Simulation
International Journal
- “Experimental Evaluation of Low-Density Polyethylene by Pyrolysis Route”, International Journal of Advanced Science and Technology, 29(7), 13652 – 13661,2020.
http://sersc.org/journals/index.php/IJAST/article/view/29475 - “Characterization of Expanded Polystyrene by Pyrolysis Process for Plastic Waste to Fuel”, International Journal of Advanced Science and Technology, 29(7), 11643 – 11651, 2020.
http://sersc.org/journals/index.php/IJAST/article/view/27595 - “Manufacturing System Simulation Review”, A Journal of Composition Theory, Vol.12 (09), pp.450-473, 2019
- Effect of manufacturing process parameters on the wear rate of Al6061-Cu-SiCp alloy composites, Emerging Materials Research, Vol. 8(2), pp 1-8, 2019.
https://doi.org/10.1680/jemmr.18.00068. - “Influence of aging & varying weight fraction of Al2O3 particles on the mechanical behaviour & volumetric wear rate of Al 7075 alloy composite produced by liquid metallurgy route”
N Sirajudeen, M Abdur Rahman, Serajul Haque, R Karunanithi and Subhrajit Patnaik
9 May 2019 • © 2019 Materials Research Express IOP Publishing Ltd, https://doi.org/10.1088/2053-1591/ab20b8 - Name of Author(s) – N. Sirajudeen, Dr. Serajul haque, M. Abdur Rahman and Rangarao
Paper Title: Microstructural analysis and hardness enhancement of mild steel plate coated with stellite6 alloy by friction surfacing method
Journal of Emerging Technologies and Innovative Research (An International Open Access Journal & UGC and ISSN Approved), July 2018, vol. 5, issue 7, (ISSN – 2349-5162) - “EDM: Effect of Casting Process Parameters on Material Removal Rate”, Encyclopedia of Plasma Technology, Taylor and Francis, New York, pp. 417-431, Feb. 2017.
- “Experimental Evaluation of Process Parameters Effect on Mechanical and Machining properties of Al6061-Cu- SiCp Reinforced Metal Matrix Composite”, AJSE, Springer, vol.41, pp.4303-4311.Nov. 2106,
- “An Integrated approach model for MSEs development in Amhara Region”, International Journal of Applied Theoretical Science and Technology, vol. 3(11),, pp.2015-2023, December 2016
- “Review on Energy Management Strategies for Industries”, International Journal of Applied Theoretical Science and Technology, vol. 2(5), pp1079-1088, 2016.
- “Effect of Process Parameters on Wear Rate of Al 6061-Cu reinforced SiCp Metal Matrix Composites”, Journal of Material and Environmental Science, vol. 5 (5) pp. 1485-1489, 2014.
- “Effect of Casting Process Parameters of Al6061-Cu- SiCp metal matrix Composite on Material Removal Rate by Electrical Discharge Machining”, Moroccan Journal of Chemistry, vol. 2 (4), pp. 343-349, 2014.
- “Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiCP Metal Matrix Composite”, Journal of Materials and Mineral characterization and Engineering, USA, vol.2 (1), pp.54-60, 2014.
- “Ergonomically designed keyboard for desktops”, International Journal of Research Fellow For Engineering, Vol.1, Issue 5, pp-76-87, 2013.
- “Ergonomic evaluation of Handle of Handicapped Tricycle” ,”, International Journal of Research Fellow For Engineering, Vol.1,Issue 5, pp-33-40, 2013.
- “Study of effect of process parameters on the mechanical properties and microstructure of Al-Cu and SiCp reinforced metal matrix composite”, International Journal of Engineering and Technology, Vol. 4, pp-427-431, 2012.
- “Ergonomic design & evaluation of pliers”, WORK: A Journal of Prevention, Assessment & Rehabilitation, Vol. 37, pp-135-143, 2010.
- “Effect of ulnar deviation of wrist combined with flexion/extension on Maximum Voluntary Contraction grip”, Journal of Human Ergology, Vol. 38, No. 1, 2009.
International Conferences
- “CURRENT ADVANCES AND CHALLENGES OF ENVIRONMENTAL FRIENDLY GREEN COMPOSITES – A REVIEW” in the 4th International Conference on Engineering Science and Technology (ICEST 2022), Luxor, Egypt | Feb. 16-17, 2022
- “EFFECT OF FABRICATION PARAMETERS ON THE MECHANICAL, WEAR, AND CORROSION BEHAVIOR OF HYBRID METAL MATRIX COMPOSITES, RECYCLING OF MMC – A REVIEW” in the 4th International Conference on Engineering Science and Technology (ICEST 2022), Luxor, Egypt | Feb. 16-17, 2022
- “Acoustic Emission Characterization of different lap joints of GFRP and BFRP under mechanical loading : A Review” in the 4th International Conference on Engineering Science and Technology (ICEST 2022), Luxor, Egypt | Feb. 16-17, 2022
- “Artificial Neural Network Approach for Casting Process Parameters on Wear Rate of Al-Cu-SiC p Metal Matrix Composite” International conference on materials processing (ICAMP 0222), NIT Raipur, 08-09 Jan 2022
- “Optimal Layout Design by Line Balancing Using Simulation Modeling”, Proceedings of the International Conference on Industrial Engineering and Operations Management Bogota, Colombia, October 25-26, 2017.
- “Bottleneck Identification Using Time Study and Simulation Modeling of Apparel Industries”, Proceedings of the International Conference on Industrial Engineering and Operations Management Bogota, Colombia, October 25-26, 2017.
- “Effect of process parameters on Mechanical Properties, Analysis and Mathametical Modelling of Al6061-Cu-SiCp Metal Matrix composites” , International conference onAdvances in Sciences and Technology, 8-9 May 2015, BIT, Bahir Dar University, Ethiopia.
National Conferences
- “Effect of Pouring Temperature and Stirring speed on Mechanical, Microstructure and Machining Properties of Al6061-Cu reinforced SiCp Metal Matrix Composites ” 2nd national conference on challenges and opportunities for technological innovation in India, 2014, AIMT,Lucknow.
- “Effect of Occupational Stress in Industries”, Proceeding of National Seminar on Ergonomic Research Techniques, M.S.University Of Baroda Vadodara, Gujrat, India, Feb. 2010.
- “Ergonomic Evaluation of Screw Driver Handle”, Proceeding of National Conference on Advances in Mechanical Engineering , Aligarh Muslim University, Aligarh, India, November 27-28, 2010.
- “Application of Ergonomics to Control Upper Limb Work Related Muskosletal Disorders”, Proceeding of All India Seminar for Improved Productivity, The Institution of Engineers (India), 21-22 Nov. 2009.
Book Publication
- “Investigation of Awareness Level of Industry4.0 among Graduate University Students: A Case of Ethiopia”, Innovation for Sustainability in Engineering and Management, Woven word academic, ISBN: 9789388762304
- Manufacturing Science, PHI Learning Private Ltd., New Delhi, ISBN:978-81-203-4426-6.
Extension
Additional Responsibilities
- PROCTOR
- Deputy Warden, KBA Men’s Hostel
- Class Advisor – MTECH CAD/CAM (Part Time & Full Time- 2018-19 Batch)
- Class Advisor – M.TECH CAD/CAM (Part Time & Full Time – 2018 Batch)
- Class Advisor – B.TECH, MECHANICAL “C” SECTION (2017-20 BATCH)
