International Journals

S.No Year Name of the staff Publications
1 2009 J. MAHASHAR ALI & M.MURUGAN J.Mahashar Ali, M.Murugan, ‘Influence of chip breaker location and angle on chip form in turning low carbon steel’, Int. J. Machining and Machinability of Materials, Vol. 5, No. 4, pp.452–475
2 2009 PERIASAMY V M A.Elango, V.M.Periyasamy, M.Paramasivam,’Study on polyaniline-ZnO used as corrsosion inhibitors of 57S aluminium in 2M NaOH solution’, Anti-corrosion methods and materials, Vol.56, 5 pp-266-270.
3 2009 PERIASAMY V M K.Subramanian, V.M.Periasamy, M.Pushpavanam, K.Ramasamy, ’Predictive modeling of copper in electro-deposition of bronze using regression and neural networks’, portugulia electro chemical acta 27(1),pp-47-55
4 2009 PERIASAMY V M K.Subramanian, V.M.Periasamy, MalathyPushpavanam, K.Ramasamy ’Predictive modeling of deposition rate in electro-deposition of copper-tin using regression and Artificial Neural Network’, Journal of Electro analytical Chemistry, Volume.636,Issues 1-2,pp-30-35 Nov-2009
5 2009 PERIASAMY V M K.Ramanathan, V.M.Periasamy, M.Pushpavanam, V.Natarajan, ‘Paricle swarm optimization of hardness in nickel diamond electro composites’, Archives Computational Materials Science And Surface Engineering, Vol.1,issues- 4,pp:232-236, 2009.
6 2009 V.M.PERIASAMY K.Ramanathan, V.M.Periasamy, MalathyPushpavanam, V.Natarajan, ‘Optimization of hardness of Nickel Diamond Electro Composites using Genetic Algorithm’, ZastitaMaterijala, Volume.50, 3, pp 162-166, 2009.
7 2010 RAJENDRAN.R R Rajendran W.Sha., R.ElansezhianAbrasive wear resistance of electroless nicked coated aluminium after post treatment, Surface and Coatings technology, Vol. 205 (3),2010, 766-772.
8 2010 RASOOL MOHIDEEN. S S Rasool Mohideen, A.M.AhmaedZaidi, “Influence of Post Weld Heat Treatment on the HAZ of Low Alloy Steel Weldments”, Int. Journal of Integrated Engineering, 2010, Vol 2 (1), p9.
9 2010 RASOOL MOHIDEEN. S S.Mazhan, A.M.AhmedZaidi, M.I.Gazali, N. Arsat, M.N.M. Hatta , S. Rasool Mohideen, “Mecahnical Properties of Medium Density Fiber board Composite Material Using Recycled Rubber and Coconut Coir”, ”, Int. Journal of Integrated Engineering, 2010, Vol 2 (1), p21.
10 2010 RASOOL MOHIDEEN. S Mazhan.S, A.M.AhmedZaidi, M.I.Gazali, N. Arsat, M.N.M. Hatta , S. Rasool Mohideen, “Study on Sound Absorption Properties of Coconut Coir Fiber Reinforced Composite with Added Recycled Rubber ”, Int. Journal of Integrated Engineering, 2010, Vol 2 (1), p21.
11 2010 RASOOL MOHIDEEN. S Rasool Mohideen. S, Ahmad Mujahid Ahmad Zaidi,Investigation on Fracture Behavior of Low Alloy Steel Weldments Subjected to Controlled Cryogenic Treatment”, International Journal of Advances in Mechanics and Applications of Industrial Materials, Vol. 1 (1) 2010.
12 2010 V.M.PERIASAMY Subramanian.K, Perisamy,V.M., Paramasivam, MalathyPurshpavanam, Ramasamy.K, “ Prediction of Cathode Efficiency in Electro Deposition of Copper – tin using Regression and Artificial Neural Network Model”.Journal of Electro Analytical Chemistry, Vol.648, issue-2, pp-176-183, October 2010.
13 2010 V.M.PERIASAMY A.Elango, V.M.Periyasamy, M.Paramasivam,Rakesh.E , “Novel Polymeric Inhibitor for corrosion of 578 Aluminium in 2M NaOH solutions”. Anti corrosion Methods and Materials, Vol.57, PP3-5, 2010
14 2010 V.M.PERIASAMY K.Ramanathan, V.M.Periasamy, MalathyPushpavanam, “Maximizing Hardness of Nickel Diamond Composites Metal Matrix using PSO” International Journal of Computational Material Science and Surface Engineering, vol.#, No.4,2010
15 2011 J.BHASKARAN Bhaskaran, M.Murugan, N.Balashanmugam, P.V.Shashikumar, ” Performance and tool wear characteristics of Cubic boron Nitride cutting tools during hard turning of steel ” in the International Journal of Mechanical and Material Engineering
16 2011 J.BHASKARAN J.Bhaskaran, M.Murugan, N.Balashanmugam, P.V.Shashikumar, M. Chellamalai, “Monitoring of hard turning using acoustic emission signal” in the Journal of Mechanical Science and Technology (JMST).Paper Number: J2011-1270R2 –
17 2011 KASIMAYAN. T B. Neethi Simon, T. Kasimayan, and K. Ramesh. The influence of ambient illumination on colour adaptation in three fringe photoelasticity, Optics and Lasers in Engng., 2011, 49(2), 258 – 264 (in press)
18 2011 RAJENDRAN.R Wei Sha, Eric A. Wilson, Raj Rajendran, SavkoMalinov, Harvey R. Charlesworth, Lee Ibbitson, “Fracture Surface, Impact Energy and Hardness of Ni-Free High-Mn SteelsMicroscopy and Analysis”, Journal of Microscopy.Published on behalf of the Royal Microscopical Society, Volume: 242 / 2011, Nov 2011.Impact Factor: 1.872.
19 2011 PERIASAMY V M K.Subramanian, MalathyPurshpavanam, V.M.Periasamy, “Predictive Modelling and Optimization of tin in Electro- Disposition of Bronze using Response Surface Methodology”, International Journal Of Computer Aided Engineering and Technology , Vol -3, No. 5-6/2011,pp.570-582.
20 2011 MURUGAN.M Bhaskaran, M.Murugan, N.Balashanmugam, P.V.Shashikumar, ” Performance and tool wear characteristics of Cubic boron Nitride cutting tools during hard turning of steel ” International Journal of Mechanical and Material Engineering, Vol.6, No.3, 419-424, 2011.
21 2011 PERIASAMY V M P.Narasimham, MalathyPurshpavanam, V.M.Periasamy, “Synthesis, charachterisation and Comparison of sediment Electro-co-deposited Nickel- Micro and Nano Sic composites”, Applied Surface Science , vol. 258, Issue -1, pp. 5980-598, October-2011
22 2012 PERIASAMY V M P.Narasimham, MalathyPurshpavanam, V.M.Periasamy,, “Wear and scratch resistance Charachteristics of Electrodeposited Nickel Nano and Micro Sic Composites, Applied surface science, Volumes 292–293, 15 July 2012, Pages 197–206
23 2012 PERIASAMY V M P. Narasimman, MalathyPushpavanam, V.M. Periasamy,” Effect of Surfactants on the Electrodeposition of Ni-SiC Composites”, Portugaliae Electrochemica Acta, Vol 30, pp.1-14, 2012.
24 2012 RASOOL MOHIDEEN. S, NASREEN KALEEM S.Rasool Mohaideen, Nasreen Kaleem, Touseef.”Material Characterization of 316l Stainless Steel after being Subjected to Cryogenic Treatment.”, International Journal of Mechanical and Industrial Engineering (IJMIE) ISSN No. 2231 –6477, Vol 2, July 2012.
25 2012 R. RAJENDRAN & RASOOL MOHIDEEN. S S.Thamizhmanii, Rajendran, Rasool Mohideen and Sulaiman,Investigation on Surface Integrity on STAVAX ESR AISI 420 Martensitic Stainless steel by cryogenically treated Steel Balls with Low Plastics Burnishing Tool Key, Engineering Materials . Vol: 504-506 (2012) pp. 1347-1352
26 2012 R. RAJENDRAN & RASOOL MOHIDEEN. S S.Thamizhmanii, Rajendran, Rasool Mohideen and Sulaiman, Performance Evaluation of Cryogenically Treated Worn CBN Insert by Turning Process, Key Engineering Materials Vols. 504-506 (2012) pp 1323-1328
27 2012 P.D.JEYKUMAR P. D. Jeyakumar,G. Devaradjane, Rollover Analysis of Bus Body Structure,European Journal of Scientific Research, ISSN 1450-216X Vol.71 No.1 (2012), pp. 64-71
28 2012 MURUGAN.M J. Bhaskaran, M.Murugan, N. Balashanmugam, P.V.Shashikumar, M. Chellamalai, “Monitoring of hard turning using acoustic emission signal” Journal of Mechanical science and Technology, 26(2), 609-615, 2012, Springer
29 2012 SELVAKUMAR. A.S Selvakumar..A.S., Kalaichelvan.K., Venkataswamy.S, “Effect of heat treatment process on hydroforming of tubular material “Euorpean journal of Scientific research, Vol-68, No.3, pp-377-388, 2012
30 2012 Varun Kumar A Varun Kumar A, Balachandar, ” Effect of Welding Parameters on Mettalurgical Properties of Friction Stir Welded Aluminium Alloy 6063-O”,Journal Of Applied Sciences,Vol. 12, (12): pp-1255-1264.
31 2012 MURUGAN.M Jeyaboovan, M.Murugan, ClemantBovas, “Statistical Analysis of Surface Roughness Measurements Using Laser Speckle Images” IEEE, pp: 378- 383, 2012
32 2012 P.SREEDHAR P.Sreedhar, Ëxperimental Investigation of Surface Roughness for Fused Deposition Modelled Part with Different Angular Orientation”, International Journal of Advanced Design and Manufacturing Technology, Vol.5, pp. 21-28
33 2012 S.SUNDARAVALLI S.Sundaravalli, Majumder .C,G.K.Vijayaraghvan,”Ëffect of Thermal properties of delaminated fibre metal laminate”, International Journal of Emerging Technology and Advanced Engineering, Vol.2 (2012)
34 2012 S.SUNDARAVALLI S.Sundaravalli, Majumder .C,G.K.Vijayaraghvan,”Analysis of delamination sequencing in multi stack fibre metal laminate”, International Journal of Engineering Research & Technology, Vol.1 (2012)
35 2013 V.M. PERIASAMY S. SathikBasha, V.M. Periasamy, M. Kamaraj, and S.M. Shariff, Improvement of Slurry Erosion Wear Resistance of 16Cr-5Ni Martensite Stainless Steel by LSA and LTH”, Journal of Materials Engineering and Performance, Vol.22, pp.3689-3698, 2013.
36 2013 MURUGAN.M Jeyaboovan, M.Murugan, “Surface roughness classification using image processing”, Mesurement46(2013), pg. (2065-2072) Elsevier, 2013
37 2013 RAJENDRAN.R Eng. V.I. Semenov a+,L.Sh. Shuster,S.-J. Huang b,R. Rajendran, ” Estimation Of Tribological Properties Of Low And Medium-Carbon Steels After Heat Treatment And Severe Plastic Deformation”
38 2013 RAJENDRAN.R M. Franco, W. Sha ,, S. Malinov b, R. Rajendran. “Phase composition, microstructure and microhardness of electroless nickel composite coating co-deposited with SiC on cast aluminium LM24 alloy substrate., Surface & Coatings Technology, Elsevier. 31st Aug, 2013. pp-
39 2013 GUNASEKERAN V Gunasekaran V, Prasanth R, Narayanan M Ëxperimental investigation and finite elemental analysis of filament wound GRP pipes for underground Application”, Procedia Engineering, 64, pp. 1293 -1301, 2013.
40 2013 S.SIVAKUMAR S.Sivakumar, V.Dhanalaxshmi, “A feature-based system for CAD/CAM interpretation for step file for cylindrical parts”, Indian Journal of Engineering and Material Science, Vol. 20, pp. 21 -26, 2013.
41 2013 P.D.JEYAKUMAR P.D.Jeyakumar, G.Devaradjane, Ënergy absorption by square, circular, pentagonal and Hexagonal steel tubes under impact loading for Automotive crush box application”, International Review of Mechanical Engineering (IREME) , Vol.7, pp. 1421 -1426, (2013)
42 2013 S.SUNDARAVALLI S.Sundaravalli, Majumder M C, G.K.Vijayaraghavan,”Transient Thermal analysis of thickness variation on fibre metal laminates”, European journal of Scientific Research, Vol. 113, pp.604 – 615, (2013)
43 2013 S.SUNDARAVALLI S.Sundaravalli, Majumder M C, G.K.Vijayaraghavan,”Modeling and simulation of delamations in FML using step pulsed active thermography”, International Journal of Mechanical, Industrial Science and Engineering, Vol 7, (2013)
44 2013 M.BALAJI M.Balaji, Öptimization of piping layout with respect to pressure and temperature using Caeser-Li”,Mechanica Confab,Vol.2, pp.57 – 62, (2013)
45 2014 V.M.PERIASAMY S.SathikBasha, V.M.Periasamy,M.Kamaraj, “Slurry Erosion Resistance of Laser – modified 16 Cr – 5 Ni Stainless Steel”, International journal of Chem Tech Research,Vol, 6,pp.691 – 704, (2014)
46 2014 S. Beer Mohammed K.Kaviyarasu, E.Manikandan, P.Paulraj, S.Beer Mohammed, J.Kennedy, “One dimensional well-aligned CdOnanocrystal by solvothermal method”, Journal of Alloys and Compounds,Vol593 (2014) pp.67-70.
47 2014 HaiderNasreen, S. Beer Mohammed, S.Rasool Mohideen HaiderNasreen, S. Beer Mohamed, S. Rasool Mohideen “Microstructural Analysis and Wear Behavior of Cryogenically Treated Ti-6Al-4V Alloy”Applied Mechanics and Materials, Trans Tech Publications, VolS. 592-594 (2014), pp 1331-1335.
48 2014 V.Muralidharan V. Muralidharan, V. Sugumaran, V. Indira “Fault diagnosis of monoblock centrifugal pump using SVM” Engineering Science and Technology, Vol 17, (2014), pp.152-157.
49 2014 V.Muralidharan V.Muralidharan,S.Ravikkumar,H.Kangasabapathy,”Condition monitoring of Self aligning carrying idler (SAI) in belt-conveyor system using statistical features and decision tree algorithm”, Measurement, Vol.58, (2014) pp. 274 – 279,.
50 2014 V.Muralidharan V.Muralidharan,V.Sugumaran, N.R.Sakthivel, “Fault Diagnosis of Centrifugal pump using Stationary wavelet Features and Bayes Algorithm”, AJSAT, Vol 3, (2014), pp.1-4.
51 2014 A Varunkumar, M.Balasrinivasan A.Varunkumar, M.Balasrinivasan, K.Balachandar, “Numerical analysis of flow stress and temperature distribution of friction stir welded aluminium alloy 6063 –O”, International Journal of Engineering, Vol .1, (2014) pp.1-8.
52 2014 A.ArockiaJulias A.ArockiaJulias,Velamurali, “Effect of carbon fiber position on the impact behavior of glass/carbon fiber hybrid composite laminated”,International journal of Applied engineering research,ISSN 0973-4562 Vol.9 No.26 (2014) PP.9103-9106.
53 2014 K.Sureshkumar S.P.Venkatesan,P.N.Kadiresh,K.sureshkumar, “Experimental investication of auueous cerium oxide nanofluid blend in diesel engine”,Advanced materials research,Vol.938(2014),PP 286-291.
54 2015 R.Sathish Kumar, K.Sureshkumar R.Sathishkumar, K.Sureshkumar, R.Velraj, “Optimization of biodiesel production from Manilkarazapota (L) seed oil using Taguchi method”, Fuel, Vol 140, (2015) pp.90-96
55 2015 R.Sathish Kumar, K.Sureshkumar R.Sathish Kumar, K.Sureshkumar,” Effect of methanol blending with Pongamiapinnata biodiesel and diesel blends on engine performance and exhaust emission characteristics of an unmodified Compression Ignition engine”,International Journal of Ambient Energy, vol 36,(2015), pp. 70-75.
56 2015 R.Rajaraman Baskar S, Rajaraman R, “Airflow Management in Automotive Engine Cooling System-Overview”, International Journal of Thermal Technologies, Vol 5, (2015), pp.1-8.
57 2015 A.ArokiaJulias A.ArokiaJulias, and Vela Murali, “ Experimental impact study on unidirectional glass-carbon hybrid composite laminates”, Scientific Engineering Composites Materials, pp. 1-8, April 2008.
58 2015 J. Mahashar Ali J.DaraniPriya, J. Mahashar, “ Design of a Measurement System for Surface Roughness using speckle Images”, Vol.2, Iss. 2,pp.300-305, April 2015.
59 2015 T.R. Tamilarasan, R. Rajendran T.R. Tamilarasan, R. Rajendran , G. Rajagopal , J. Sudagar,” Effect of surfactants on the coating properties and corrosion behaviour of Ni–P–nano-TiO2 coatings” Surface & Coatings Technology,Vol. 276, pp.320-326,Aug.2015
60 2015 T.R. Tamilarasan, R. Rajendran T.R. Tamilarasan, U. Sanjitha, R. Satisha, R. Rajendran , G. Rajagopal,” Tribological Performance Optimization of Electroless Ni-P-nano-TiO2 Coating Using Taguchi Method”, International Journal of Applied Engineering Research, Vol.10, Iss.57, pp.296-300.
61 2015 T.R. Tamilarasan,R. Rajendran M. Siva sankar, T.R.Tamilarasan ,R.Rajendran,” Effect of bath loading on Electroless NiP-NanoTiO2”, International Journal of Applied Engineering Research, Vol.10, Iss.57, pp.317-322.
62 2015 R.Rajaraman S.Baskar, R.Rajaraman,”Numerical Investigation on Airflow Distribution of Automotive Radiator”, International Review of Mechanical Engineering, Vol.9, Iss.4, pp. 417-422.
63 2015 T.R. Tamilarasan, R. SathishKumar, R. Rajendran T.R. Tamilarasan, R. Sathish Kumar, R. Rajendran and G. Rajagopal,” Optimization of electroless Ni-P-nano-TiO2 Coating parameters using Taguchi method for corrosion performance” Applied Mechanics and Materials” 813-814, pp. 95-100.
64 2016 T.R. Tamilarasan, R. Rajendran T.R. Tamilarasan, R. Rajendran “Wear and Scratch Behaviour of Electroless Ni-P-nano-Tio2 : Effect of Surfactants” Wear, 346-347, pp.148-157.
65 2016 R.Sathishkumar, K.Sureshkumar R.Sathishkumar, K.Sureshkumar “ManilkaraZapota (L.) Seed Oil : A new third generation biodiesel Resource” WasteBiomass
66 2016 S. Beer Mohammed A.Devarpiran, S. Beer Mohammed, A.ArunThangadurai, “ Fabrication and Mechanical properties of fly ash filled natural fiber epoxy composite” International Journal of science and innovative engineering and technology, 1(1), 6-12, 2016
67 2016 R. Sathish Kumar and K. Sureshkumar R. Sathish Kumar, K. Sureshkumar, ‘Manilkara zapota (L.) Seed Oil: A New Third Generation Biodiesel Resource’,Waste and Biomass Valorization,Vol 7, Issue 5, pp. 1115-1121, 2016.
68 2016 Rasool Mohideen. S Rasool Mohideen. S, Thamizhmanii. S, Muhammed Abdul Fatah. M.M and W.Najmuddin W. Saidin, ‘Numerical Fracture Analysis of Cryogenically Treated Alloy Steel Weldments’Materials Science and Engineering, Vol 114, pp.1-16, 2016
69 2016 Pervaz Ahmed Mouda, Siddhi Jailani Hydershah Pervaz Ahmed Mouda,Siddhi Jailani Hydershah ,’ Sliding Wear Behavior of Cryogenic Treated Copper Beryllium Alloy’, Applied Mechanics and Materials, Vol 852, pp.391-396, 2016.
70 2016 V. Muralidharan K.Radhakrishnan, V. Muralidharan, ‘ Optimization of Weld Parameters and Weld Bead Dimensions in Welding of 0.3%C-Cr-Mo-V Steel by Gas Tungsten Arc Welding Process’ Applied Mechanics and Materials, Vol 852, pp.178-184, 2016.
71 2016 M. Pervaz Ahmed,H. Siddhi Jailani,S. Rasool Mohideen M. Pervaz Ahmed,H. Siddhi Jailani,S. Rasool Mohideen,A. Rajadurai, ‘ Effect of Cryogenic Treatment on Microstructure and Properties of CuBe2’, Metallography, Microstructure, and Analysis, Vol 5, Issue 6, pp..528-535.
72 2016 V. Muralidharan V.Muralidharan, V.Sugumaran, ‘SVM-based wavelet selection for fault diagnosis of monoblock centrifugal pump’, Int. J. Data Analysis Techniques and Strategies, Vol 8, Issue 4, pp.357-369, 2016.

National Journals

S.No Year Name of the staff Publications
1 2009 RAJARAMAN. R Rajaraman R. and Velraj R. ‘Numerical estimation of IHTC during solidification of rectangular aluminum alloy casting by control volume technique’, Manufacturing Technology Today , May 2009.
2 2009 S.SIVAKUMAR S.Sivakumar, V.Dhanalakshmi, K.Satyanarayanasamy. “Integration of CAD / CAI through feature extracted from step file”, Manufacturing Technology Today, Dec-2009, pp-20 to27.
3 2009 RAJENDRAN R S.Rasool Mohideen, K.Angamuthu, G.Thanigaiyarasu, R.Rajendran, Investigation on the Toughness of Steel Weldments Subjected to Deep Cryogenic Treatment Using Notch Tensile Specimen, Manufacturing Technology Today (National) July 2009.p13-20
4 2009 PERIASAMY V M Polyanaline as a corrosion inhibitor for Commercial Aluminium in alkaline solutions, A.Elango , Umadevi , M.Paramasivam, V.M.Perisamy, Journal Of Mettalurgy and Material science , vol-51, Issue -2, PP 97-104, 2009
5 2010 SELVAKUMAR.A.S Selvakumar.A.S, “Evaluation of Tube formability using hydroforming technique. Manufacturing technology today, May 2010.
6 2015 H.SiddhiJailani H.SiddhiJailani, A.Rajadurai, B.Mohan, T.Sornakumar, “Eavaluation of drilled hole quality of Al-Si alloy / fly ash composites produced by powder metallurgical technique”, Indian Journal of Engineering and Materials Sciences, Vol.22, pp.414-420, Aug 2015.
7 2016 V. Muralidharan V.Muralidharan, V.Sugumaran ,’ A Comparative Study between Support Vector Machine (SVM) and Extreme Learning Machine (ELM) for Fault Detection in Pumps’, Indian Journal of Science and Technology, Vol 9, Issue 49, pp. 1-8, 2016.

International conferences

S.No Year Name of the staff Publications
1 2009 R. RAJENDRAN “Surface Modification of EN 8 Steel by Aluminizing and Nitriding for Automotive Applications” 09M-0018/2009-01-0604 – SAE 2009 world congress at Detroit USA April 20-23, 2009
2 2009 S.SIVA KUMAR “Comparison of CAD Models and Real Time Images Using STEP Files for Computer Aided Inspection” – 2nd International Conference on Recent Advances in Material Processing Technology (RAMPT’09), , National Engineering College, Kovilpatti, Feb- 25 to 27 – 2009.
3 2009 RASOOL MOHIDEEN. S S. Rasool Mohideen, Ahmad Mujahid Ahmad Zaidi, “Investigation on Fracture Behaviour of Low Alloy Steel Weldments Subjected to Controlled Cryogenic Treatment”, AES- ATEMA 2009 Conference ,Hamburg, Germany , September 2009.
4 2009 RASOOL MOHIDEEN. S S. Rasool Mohideen and Nor Azalli Bin Azmir, “ Metallographic Examination Of Cryogenically Treated Steel Weldments”, Malaysian Metallurgical Conference December 2009.
5 2009 KASIMAYAN. T T. Kasimayan, and K. Ramesh “Finite Element Simulation of Whole Field Photoelastic Parameters for the Slice Cut from 3D Models”, Intl. Congress on Computational Mechanics and Simulation (ICCMS 09), IIT Bombay, 1st – 3rd December 2009.
6 2009 KASIMAYAN. T T. Kasimayan, and K. Ramesh, “Digital Photoelastic Analysis of Stress Frozen Slices using Five-step Method”, 4th Intl. Conference on Experimental Mechanics (ICEM 2009), Singapore, 18th – 20th November 2009.SPIE Proceedings Vol:7522, DOI: 10.1117/12.851707
7 2009 KASIMAYAN. T T. Kasimayan, and K. Ramesh, “Whole Field PhotoelasticParametersEstimation using Five-step Method”, 7th EUROMECH Solid Mechanics Conference (ESMC 2009), Portugal, 7th – 11th September 2009
8 2010 RASOOL MOHIDEEN. S Rasool Mohideen. S , MohdShukriMohdAripin, S.Thamizhmanii, Sulaiman Bin Hasan and Dan Sathiaraj, “Deep Cryogenic Treatment on Aluminum Silicon Carbide (Al-SiC) Composite”, International Conference on Manufacturing Science and Technology, Kuala Lumpur, Malaysia, December, 2010
9 2011 R.RAJENDRAN & T.VENKATESAN Elanchesian Effect of Coating Time on the Performance of Electroless Nickel Coated Steel, SAE Paper no: 2011-01-0057, SAE World Congress, Detroit, U.S., Apr 2011.
10 2012 R.RAJENDRAN R.RAJENDRAN, “Material Science through Activity based learning,4th International Materials Education Symposia”, UK , Apr 2012
11 2012 A. AROKIA JULIAS. A.Arokiajulias, Velamurali, Sufean A.M “Experimental study on delaminated buckling of symmetric hybrid laminated composite plates”, International Conference on Mechanical and Industrial Engineering, Hotel park plaza, Goa on 8thapril 2012
12 2012 P.D.JEYKUMAR P. D. Jeyakumar,G. Devaradjane, “ Improvement of the bus body structure for frontal accidents “, ASME International congress and exposition, Nov- 9-15, 2012, Austin Texas, USA
13 2012 M.MURUGAN, BHASKARAN, J Bhaskaran, J. and Murugan, M. “Online process monitoring of hard turning using statistical parameters of acoustic emission signal” accepted for presentation in International conference Encon 2012 to be held at Sarawak, Malaysia , July 2012
14 2012 SATHISH KUMAR R, SURESH KUMAR K, Sathishkumar R, Suresh kumar K, Velraj R. “Performance of exhaust ebruarycharachteristics of an unmodified CI engine fuelled with Biodiesel – Diesel-Methanol blends”, Annual international conference on Sustainable energy and environment sciences (SEES 2012), 13- 14thebruary 2012, Singapore.
15 2012 R. RAJENDRAN, AND T. VENKATESAN T. Antony MuthuBalan, R. Rajendran, and T. Venkatesan, “Wear Improvement of Austenitic Stainless Steel by Gas Nitriding”, EnCon2012 , Malaysia,Jul-2012.
16 2012 M.MURUGAN, T. JEYAPOOVAN T. Jeyapoovan, Murugan. M,”Statistical analysis of surface roughness measurements using laser speckle images”, IEEE Conference : Information and Communication Technologies (WICT), 2012 World Congress,Oct. 30 2012-Nov. 2 2012,Page(s): 378 – 382
17 2012 A.VARUN KUMAR A.Varunkumar, K.Balachander, “Microstructural Evolution of Friction Stir Welded Alumnium Alloy 6063 –O””, 2012.
18 2013 RAJ RAJENDRAN How to prepare the engineering students for the 21st century, 5th International Materials Education Symposia, UK, April 2013
19 2013 RAJ RAJENDRAN, REVATHI VISWANATHAN Raj Rajendran, RevathiViswanathan, “TEACHING MATERIAL SCIENCE AND ENGINEERING COMMUNICATION: An Integrated Teaching, Writing and Communication Program”, 5th International Materials Education Symposia, ,UK, April- 2013.
20 2013 S.RASOOL MOHAIDEEN, HYDER NASREEN S.RasoolMohaideen, HyderNasreen, Jefrey, “ Effect of Cryogenics treatment on Titanium alloys”, International Conference on Engineering Materials and processes. ICEMAP-2013, 23rd&24th May 2013, Pg-125.
21 2013 RAJ RAJENDRAN V.I. Semenov,L.Sh. Shuster, J. Huang,Ch. Lin, R. Rajendran, ESTIMATION OF TRIBOLOGICAL PROPERTIES OF LOW AND MEDIUM-CARBON STEELS AFTER HEAT TREATMENT AND SEVERE PLASTIC DEFORMATION,10th International Conference Machines, Technologies. Materials in Bulgaria International Vurtual Journal Machines, Technologies, Materials Year VII Issue 10/2013 ISSN 131300226, Sep 18-20, 2013
22 2013 A.ArokiaJulias Ramya Suresh, Velamurali, A.ArokiaJulias, Ëxperimental Investigation of flexural Strength of glass / carbon hybrid composite laminates”, International Conference on sustainable manufacturing, ICSM 2013.
23 2013 A.ArokiaJulias N.Ramkumar, Velamurali, A.ArokiaJulias,S.Rasool Mohideen, Ëxperimental Investigation of Mode torughness of low temperature treated glass / carbon carbon hybrid composite laminates”, International Conference on sustainable manufacturing, ICSM 2013
24 2014 R. Rajendran V.I. Semenov, L.Sh. Shuster, S.-J. Huang, P.-Ch. Lin, R. Rajendran, “Commercially pure copper and low-alloyed chrome bronze in tribological contact with graphitiferous material”, Machines, Technolоgies, Materials, Iss. 9, 2014, pp. 36-39, Bulgeria
25 2014 R.Rajendran J Purushothaman, Shaju K Albert, R Ramaseshan and R Rajendran,” Investigation of Al-Si alloy coating on RAFM steel substrate by hot dip aluminizing methods”, International Symposium for research Scholars on Metallurgy, Materials Science and Engineering, IIT Madras, Dec 11, 2014.
26 2014 M. Pervaz Ahmed, H. Siddhi Jailani and S. Rasool Mohideen M. Pervaz Ahmed, H. Siddhi Jailani and S. Rasool Mohideen ,” Effect of Cryogenic Treatment on copper Beryllium Alloy”, Advances in Design & Manufacturing, NIT Tiruchirapalli, 5.12.2014
27 2014 V.Muralidharan S.Ravikumar, V.Muralidharan, H.Kanagasabapathy,” Fault diagnosis of self aligning carrying idler (SAI) in Belt-Conveyor system using statistical features and Support Vector Machine, ICCIAMR 2014, Vol 2, ISBN – 978-81-924031-7-5
28 2015 R.Rajendran, G.Ramanjaneyalu, T R Tamilarasan R.Rajendran, G.Ramanjaneyalu, T R Tamilarasan, Vladimir I Semenov, “Cryogenic Treatment of SG Iron for Disk Brake Application”, SAE International,April 2015.
29 2015 R. Rajendran V.I. Semenov, L.Sh. Shuster, S.-J. Huang, R. Rajendran, S.V. Chertovskikh, V.G. Shibakov Comparative evaluation of tribological properties of low and medium carbon steels after heat treatment and severe plastic deformation // Book of Abstracts of the 5th Int. Symp. “Bulk Nanostructured Materials: from fundamentals to innovations” (BNM-2015), USATU, August 26 -28, 2015, Ufa, pp. 25-26
30 2016 H.SiddhiJailani C.K. Aravindapandian, K. Koppiahraj, H.SiddhiJailani, “Investigation and development of polymer composite incorporated natural fabrics – Jute and Linen”, International conference on Advancements in Polymeric Materials, Feb 2016.
31 2016 Pervaz Ahmed Mouda, H.SiddhiJailani Pervaz Ahmed Mouda , Abdul Azeez, Siddhi JailaniHydershah, “Sliding wear behavior of cryogenic treated copper beryllium alloy”, International Conference on Mechanical Engineering Design , Apl 2016.
32 2016 V. Muralidharan Ravikumar S,Mr.S.Giftlin, Dr. H..Kanagasabapathy and V. Muralidharan, “Vibration based fault detection and condition monitoring using Decision Tree Algorithm for Training carrying Idlers (TCI) in Belt- Conveyor System” International Conference on Mechanical Engineering Design, April 2016.
33 2016 V. Muralidharan K.Radhakrishnan and V.Muralidharan, “Optimization Of Weld Parameters And Weld Bead Dimensions In Welding Of 0.3%C-Cr-Mo-V Steel By GTAW Process”, International Conference on Mechanical Engineering Design , Apl 2016.
34 2016 Rasool Mohideen SThamizhmanii, Rasool Mohideen, Sulaiman, ‘Vertical Multi Roller Burnishing on Copper and Aluminum Metal’ Proceedings of the World Congress on Engineering 2016, Vol 2, 2016

National Conference

S.No Year Name of the staff Publications
1 2009 K.M.ABUBACKER AbubackerK.M ,“Finite Element Analysis and Optimization of Impingement Heat Sink Fin”, Proceedings of the Second National Conference on Emerging Trends In Engineering And Technology – SNCETET’ 09 Rajarajeswari Engineering College, 2nd – 3rd, April 2009.
2 2009 K.M.ABUBACKER Abubacker K.M , “Computational Fluid Dynamics Analysis of Impingement Heat Sink Fin”, Proceedings of the Second National Conference On Emerging Trends In Engineering And Technology – SNCETET’ 09. Rajarajeswari Engineering College, 2nd – 3rd, April 2009.
3 2009 JEYAKUMAR P D Jeyakumar. P.D., “Modelling and Analysis of Rail Coach Under frame”, National Conference of ACDAME’09, 11th April 2009, organized by GKM College of Engineering and Technology.
4 2009 VENKATESAN T Venkatesan. T., “Analysis and Optimization of Drive system and Allied Components of Common Rail Endurance Testing Machine”, National Conference of ACDAME’09, organized by GKM College of Engineering and Technology, , 11th April 2009.
5 2009 S.ZUBAIDA KATHOON BEE ZubaidaKathoonBee.S, ”Finite Element Simulation of Oblique Metal Cutting”, Proceedings of the Second National Conference On Emerging Trends In Engineering And Technology – SNCETET’ 09. Rajarajeswari Engineering College. 2nd – 3rd, April 2009.
6 2009 SELVA KUMAR A S Selva Kumar. A.S., “Numerical Simulation of Tube Formability using Hydro Forming Process”, Proceedings of The Second National Conference On Emerging Trends In Engineering And Technology – SNCETET’ 09 Rajarajeswari Engineering College, 2nd – 3rd, April 2009.
7 2010 A.AROCKIA JULIAS AROKIA JULIAS.A”Delamination analysis of fiber reinforced polymer composite laminates” Recent innovations in production Engg. MIT, Chennai, 16th to 17th april 2010
8 2011 AROKIA JULIAS.A “Buckling Analysis of Hybrid Fiber Reinforced Polymer Laminates” Presented paper in the National conference AMS’11 on 1st April 2011at GCT Coimbatore.
9 2011 AROKIA JULIAS.A AROKIA JULIAS.A“ Impact test on Hybrid Fiber Reinforced Polymer Laminates “Presented paper in the National conference AMS’11 on 1st April 2011 at GCT Coimbatore.
10 2013 AROKIA JULIAS.A M. Rajmohan, A. Arockia Julias, S. Thajudeen, L. Vijayakumar , “Experimental Studies On Delamination Behavior Of Hybrid Composite Laminates.”, Advances in Materials, Design & Manufacturing (AMDM 2013)- Vol- 1, PP-11-15,April 2013
11 2013 A.S.Selvakumar A.S.Selvakumar,S.Venkataswamy, “”Experimental Investigation for the evaluation of Tube Formability using Hydroforming Technique”, Proceedings of national conference on recent advances in Manufacturing and Management 2013.
12 2015 S.Rajarajan,
R.Rajendran
TilakkumarJ.V,S.Rajarajan,R.Rajendran,”Corrosive wear of aluminized steel”
13 2015 T.Venkadesan,
R.Rajendran
P.Madhavan,T.Venkadesan,R.Rajendran,”Fatigue crack propagation analysis on aluminium alloy-6062 using extened finite element modeling.
14 2015 R.Rajendran, D.Prithiviraj,R.Rajendran,Venugopal,”Correlation between neutral salt spray(NSS) test and potentiostat dynamic test for corrosion on zinc plated steel
15 2015 R.Rajaraman BaskarSubramaniyan,R.Rajaraman “Investication on overall heat transfer coefficient of EG/Cunanofluid in a car radiator”.
16 2015 S.Jeavudeen, M.Murugan S.Jeavudeen, M.Murugan and S.Guhanesan, “Enhancement of Machining of Titanium Alloy in the powder mixed EDM process”, National conference on Recent Trends in Efficiency Management in Industries, April 2015
17 2015 N.Sirajudeen O.Sathish and N.Sirajudeen,” Characterization of Friction surfaced low carbon steel by modeling alloy”, National conference on Recent Trends in Mechanical Engineering Design, Manufacturing & Material Science”, April 2015.
18 2015 N.Ravikumar and R.Rajendran M.Abdur Rahman, N.Ravikumar and R.Rajendran,” Development of Wear Resistance Brake Pad Material for Air Disc Brake Pad”, National conference on Recent Trends in Efficiency Management in Industries, April 2015
19 2015 Loganathan S, R.Rajendran Santhoshkumar G, Loganathan S, R.Rajendran,” Experimental Analysis of TribologicalBehaviour of Nano CuO dispersed Lubrication on steel”, National conference on Recent Trends in Efficiency Management in Industries, April 2015
20 2015 Varun Kumar A, M. Balasrinivasan Mohammed Dulkiflee, Varun Kumar A, M. Balasrinivasan,” Metallurgical Properties of Aluminium Alloy 7075-T6 by Friction Stir Welding”, National conference on Recent Trends in Efficiency Management in Industries, April 2015
21 2015 S.Beer Mohammed T.Shanawaz and S.Beer Mohammed, “Formation of Ni-Al Intermaetallic Coating on 9Cr 1Mo Steel Substrate”, National conference on Recent Trends in Efficiency Management in Industries, April 2015.
22 2015 T. Venkatesan X.Joseph raj, T. Venkatesan, “Fatigue Analysis of PVD coated Mild steel using Rotary Bending Machine”, National conference on Recent Trends in Mechanical Engineering Design, Manufacturing & Material Science, April 2015
23 2015 S. Beer Mohammed R.Vetri and S. Beer Mohammed, “Design and Analysis of composite deck plate for marine structures”, National Conference on Trends and Innovations in Mechanical Engineering,April 2015
24 2015 S. Beer Mohammed T.K. Mohammed Ashik Ali and S. Beer Mohammed, “Design and Analysis of Multi Grade Waste Handling Equipment”, National Conference on Recent Trends in Design and Analyzing, April 2015.
25 2016 R.Rajendran, N. Ravikumar, M.Ananthasaravanan, R.Rajendran, N. Ravikumar, K.Venkateshwaran, Experimental Studies on Properties of steel based bi metal material, Heat Treatment and Surfce engineering conference& Expo, Jun 2016
26 2016 R.Rajendran, T.R.Tamilarasan, M.Vignesh, R.Rajendran, T.R.Tamilarasan, A.Venugopal,
Sliding wear behavior of nitride cast iron against steel, Heat Treatment and Surfce engineering conference & Expo, Jun 2016
27 2016 R.Rajendran, G.Ramanjaneyalu Dhanalakshmisatishkumar, M.ShahulHameed, R.Rajendran, G.Ramanjaneyalu, K.Shanmugasundaram,
Effect of load and sliding velocity on wear and coefficient of friction of Al/SiC and Al / Si3N4 composites , Heat Treatment and Surfce engineering conference & Expo, Jun 2016
28 2016 N.Ravikumar, R.Rajendran P.Ranjith, N.Ravikumar, R.Rajendran,
Tribological properties brake friction materials,Heat Treatment and Surfce engineering conference & Expo, jun 2016
29 2016 Loganathan S, Rajendran R Rasheedur Rahaman M G, Loganathan S, Rajendran R,
Effect of deep cryogenic treatment on tensile and fatigue behavior of EN19 steel,Heat Treatment and Surfce engineering conference & Expo, june 2016
30 2016 N.Ravikumar, R. Rajendran Tanmoydey, N.Ravikumar, R. Rajendran,
Modal Analysis of Disk Brake System, Heat Treatment and Surfce engineering conference & Expo, june 2016
31 2016 Beer Mohammed S, Sathyanarayanan D Darwin S, Beer Mohammed S, Sathyanarayanan D,
Micro structural and wear peoperties of Stellite deposition by powder metallurgy process,Heat Treatment and Surfce engineering conference & Expo, june 2016