NAAC A+ Grade NBA NIRF Ranking QS I-GAUGE DIAMOND QS Asia Ranking Swachh Campus Ranking 2019 QS I-GAUGE E-LEAD ARIIA
IQAC | NBA | NIRF | NAAC | NAD/ABC | e-SANAD
*Anti-Ragging Cell Control Rooms / Helplines: 91(44) 22759200 Ext 212 & 91(44) 22759200 Ext 198 / 131 / 133 *Internal Complaints Committee to Prevention, Prohibition and Redressal of Sexual Harassment of Women Employees and students at Workplace (Helpline: 91-044-22759200 Extn:343) *Caste discrimination Cell Control Rooms / Helplines: 91(44) 22759200 Ext 212 & 91(44) 22759200 Ext 198 / 131 / 133 *Students having any grievance on academic matters may contact dean_student@crescent.education

Dr. Serajul Haque

Designation : Assistant Professor (Sr. Gr.)
Nature of Employment : Regular
Date of Joining : 18-09-2017
Qualification : B.Tech,M.Tech, Ph.D.
Phone : 8004743259
Email ID : serajulhaque@crescent.education

Teaching

Educational Background

Degree Discipline Year of Passing University
Ph.D. Production Engineering March 2017 Integral University, Lucknow
M.Tech Industrial &Production Engineering Jan 2008 Aligarh Muslim University, Aligarh
B. E. Mechanical Engineering July2005 Aligarh Muslim University, Aligarh

Work Experience

Designation Institution Duration No. of Years
Assistant Professor B.S.Abdur Rahman Institute 18 Sep 2017 Till date
Assistant Professor Bahir Dar University, Ethiopia Oct 2014 to 11 Sep.2017 3 years
Assistant Professor Azad Technical Campus, Lucknow Aug.. 2013 to Sep. 2014 1 year
Lecturer King Khalid University, Saudi Arabia Dec.2011 to Aug. 2013 1 years and 9 months
Assistant Professor Integral University, Lucknow Jan 2008 to Dec 2011 4 year
Site Engineer Power Engineers(India) July 1999 to June 2001 2 years

Research

Areas Of Research Interest

  • Metal Matrix Composite
  • Unconventional Machining
  • Ergonomics & Human Factor Engineering
  • Manufacturing System Simulation

International Journal

  • Abdur Rahman, M., Haque, Serajul, Athikesavan, M.M. et al. A review of environmental friendly green composites: production methods, current progresses, and challenges. Environ Sci Pollut Res (2023). https://doi.org/10.1007/s11356-022-24879-5
  • Abdur Rahman, Serajul Haque, “The Influence of Heat Treatment and High Energy Ball Milling on the Density, Hardness, and Wear Behavior of Al 7150 Alloy Via Hot Uniaxial Compaction,” Volume 19, Issue 3, Iranian Journal of Materials Science and Engineering, September 2022. http://dx.doi.org/10.22068/ijmse.2618
  • Serajul Haque, M. Abdur Rahman, Sirajudeen, Mohamed Bak Kamaludeen, Effect of powder metallurgy process parameters on tribology and micro hardness of Al6063- nano Al2O3 MMCs, Materials Today: Proceedings, Vol-68, Issue-4, 1030-1037, 2022, https://www.sciencedirect.com/science/article/pii/S2214785322054360
  • Serajul Haque, M. Abdur Rahman, Sirajudeen, Mohamed Bak Kamaludeen, Artificial neural network approach for casting process parameters on wear rate of Al-Cu-SiCp metal matrix composite, Materials Today: Proceedings, 2022,ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2022.06.296.
  • “Experimental Evaluation of Low-Density Polyethylene by Pyrolysis Route”, International Journal of Advanced Science and Technology, 29(7), 13652 – 13661,2020.
    http://sersc.org/journals/index.php/IJAST/article/view/29475
  • “Characterization of Expanded Polystyrene by Pyrolysis Process for Plastic Waste to Fuel”, International Journal of Advanced Science and Technology, 29(7), 11643 – 11651, 2020.
    http://sersc.org/journals/index.php/IJAST/article/view/27595
  • “Manufacturing System Simulation Review”, A Journal of Composition Theory, Vol.12 (09), pp.450-473, 2019
  • Effect of manufacturing process parameters on the wear rate of Al6061-Cu-SiCp alloy composites, Emerging Materials Research, Vol. 8(2), pp 1-8, 2019.
    https://doi.org/10.1680/jemmr.18.00068.
  • “Influence of aging & varying weight fraction of Al2O3 particles on the mechanical behaviour & volumetric wear rate of Al 7075 alloy composite produced by liquid metallurgy route”
    N Sirajudeen, M Abdur Rahman, Serajul Haque, R Karunanithi and Subhrajit Patnaik
    9 May 2019 • © 2019 Materials Research Express IOP Publishing Ltd, https://doi.org/10.1088/2053-1591/ab20b8
  • Name of Author(s) – N. Sirajudeen, Dr. Serajul haque, M. Abdur Rahman and Rangarao
    Paper Title: Microstructural analysis and hardness enhancement of mild steel plate coated with stellite6 alloy by friction surfacing method
    Journal of Emerging Technologies and Innovative Research (An International Open Access Journal & UGC and ISSN Approved), July 2018, vol. 5, issue 7, (ISSN – 2349-5162)
  • “EDM: Effect of Casting Process Parameters on Material Removal Rate”, Encyclopedia of Plasma Technology, Taylor and Francis, New York, pp. 417-431, Feb. 2017.
  • “Experimental Evaluation of Process Parameters Effect on Mechanical and Machining properties of Al6061-Cu- SiCp Reinforced Metal Matrix Composite”, AJSE, Springer, vol.41, pp.4303-4311.Nov. 2106,
  • “An Integrated approach model for MSEs development in Amhara Region”, International Journal of Applied Theoretical Science and Technology, vol. 3(11),, pp.2015-2023, December 2016
  • “Review on Energy Management Strategies for Industries”, International Journal of Applied Theoretical Science and Technology, vol. 2(5), pp1079-1088, 2016.
  • “Effect of Process Parameters on Wear Rate of Al 6061-Cu reinforced SiCp Metal Matrix Composites”, Journal of Material and Environmental Science, vol. 5 (5) pp. 1485-1489, 2014.
  • “Effect of Casting Process Parameters of Al6061-Cu- SiCp metal matrix Composite on Material Removal Rate by Electrical Discharge Machining”, Moroccan Journal of Chemistry, vol. 2 (4), pp. 343-349, 2014.
  • “Mechanical and Machining Properties Analysis of Al6061-Cu-Reinforced SiCP Metal Matrix Composite”, Journal of Materials and Mineral characterization and Engineering, USA, vol.2 (1), pp.54-60, 2014.
  • “Ergonomically designed keyboard for desktops”, International Journal of Research Fellow For Engineering, Vol.1, Issue 5, pp-76-87, 2013.
  • “Ergonomic evaluation of Handle of Handicapped Tricycle” ,”, International Journal of Research Fellow For Engineering, Vol.1,Issue 5, pp-33-40, 2013.
  • “Study of effect of process parameters on the mechanical properties and microstructure of Al-Cu and SiCp reinforced metal matrix composite”, International Journal of Engineering and Technology, Vol. 4, pp-427-431, 2012.
  • “Ergonomic design & evaluation of pliers”, WORK: A Journal of Prevention, Assessment & Rehabilitation, Vol. 37, pp-135-143, 2010.
  • “Effect of ulnar deviation of wrist combined with flexion/extension on Maximum Voluntary Contraction grip”, Journal of Human Ergology, Vol. 38, No. 1, 2009.

International Conferences

  • “CURRENT ADVANCES AND CHALLENGES OF ENVIRONMENTAL FRIENDLY GREEN COMPOSITES – A REVIEW” in the 4th International Conference on Engineering Science and Technology (ICEST 2022), Luxor, Egypt | Feb. 16-17, 2022
  • “EFFECT OF FABRICATION PARAMETERS ON THE MECHANICAL, WEAR, AND CORROSION BEHAVIOR OF HYBRID METAL MATRIX COMPOSITES, RECYCLING OF MMC – A REVIEW” in the 4th International Conference on Engineering Science and Technology (ICEST 2022), Luxor, Egypt | Feb. 16-17, 2022
  • “Acoustic Emission Characterization of different lap joints of GFRP and BFRP under mechanical loading : A Review” in the 4th International Conference on Engineering Science and Technology (ICEST 2022), Luxor, Egypt | Feb. 16-17, 2022
  • “Artificial Neural Network Approach for Casting Process Parameters on Wear Rate of Al-Cu-SiC p Metal Matrix Composite” International conference on materials processing (ICAMP 0222), NIT Raipur, 08-09 Jan 2022
  • Presented a research paper entitled “Indian Engineering Industries and its Standards: A Review” in the second international conference on Advances in Computational Science and Engineering 2021 (ICACSE 2021), 20 – 22 Dec 2021, Live4Research, Tirupur, India, Publishing partner IOP Science.
  • “Optimal Layout Design by Line Balancing Using Simulation Modeling”, Proceedings of the International Conference on Industrial Engineering and Operations Management Bogota, Colombia, October 25-26, 2017.
  • “Bottleneck Identification Using Time Study and Simulation Modeling of Apparel Industries”, Proceedings of the International Conference on Industrial Engineering and Operations Management Bogota, Colombia, October 25-26, 2017.
  • “Effect of process parameters on Mechanical Properties, Analysis and Mathametical Modelling of Al6061-Cu-SiCp Metal Matrix composites” , International conference onAdvances in Sciences and Technology, 8-9 May 2015, BIT, Bahir Dar University, Ethiopia.

National Conferences

  • “Effect of Pouring Temperature and Stirring speed on Mechanical, Microstructure and Machining Properties of Al6061-Cu reinforced SiCp Metal Matrix Composites ” 2nd national conference on challenges and opportunities for technological innovation in India, 2014, AIMT,Lucknow.
  • “Effect of Occupational Stress in Industries”, Proceeding of National Seminar on Ergonomic Research Techniques, M.S.University Of Baroda Vadodara, Gujrat, India, Feb. 2010.
  • “Ergonomic Evaluation of Screw Driver Handle”, Proceeding of National Conference on Advances in Mechanical Engineering , Aligarh Muslim University, Aligarh, India, November 27-28, 2010.
  • “Application of Ergonomics to Control Upper Limb Work Related Muskosletal Disorders”, Proceeding of All India Seminar for Improved Productivity, The Institution of Engineers (India), 21-22 Nov. 2009.

Book Publication

  • “Investigation of Awareness Level of Industry4.0 among Graduate University Students: A Case of Ethiopia”, Innovation for Sustainability in Engineering and Management, Woven word academic, ISBN: 9789388762304
  • Manufacturing Science, PHI Learning Private Ltd., New Delhi, ISBN:978-81-203-4426-6.

Faculty Development Programme

Attended One Week Faculty & Executive Development  Programme (FEDP) on “Application of Optimization Techniques in Engineering (AOTE)” from 28th March to 1st April, 2022, conducted by the DEPARTMENT OF MECHANICAL ENGINEERING ZAKIR HUSAIN COLLEGE OF ENGINEERING AND TECHNOLOGY ALIGARH MUSLIM UNIVERSITY, ALIGARH.

Extension

Additional Responsibilities

  • PROCTOR
  • Deputy Warden, KBA Men’s Hostel
  • Class Advisor – MTECH CAD/CAM (Part Time & Full Time- 2018-19 Batch)
  • Class Advisor – M.TECH CAD/CAM (Part Time & Full Time – 2018 Batch)
  • Class Advisor – B.TECH, MECHANICAL “C” SECTION (2017-20 BATCH)

Technical membership

  • Member of “International Association of Engineers”